Road To Serenity Menu Our Other Sites

We Have Advertising Relationships With The Merchant(s)/Store(s) On This Page.
Date Started February 10, 2007

We Collect No Information From You


Try Our Quick Search Bar

Wheelchair Ramps

  • DuroMed 5 Foot Telescoping Wheelchair Ramps
  • Description: The DuroMed 5 Foot Telescoping Wheelchair Ramps allow wheelchair users easy access to rooms and entrances that have steps. These retractable wheelchair ramps are helpful for wheelchair users when visiting friends or family homes that are not wheelchair accessible. The Telescoping Wheelchair Ramps extend from 3 to 5 feet, allowing them to be used on different step sizes and heights up to 10 inches. The ramps are 7 inches wide overall with an inner track of 4 inches wide. Each ramp weighs only 6 pounds, so they are light and compact for traveling or storage. Each ramp will support 330 pounds, for a total of 660 pounds. To extend the ramps, pull sections one and two until the locking buttons are fully extended into the holes and snap into place. After use, simply retract them and put them away in their convenient nylon carrying bag. DuroMed 5 Foot Telescoping Wheelchair Ramps Overall Width: 7 inches. Inside track area: 4 inches wide. Overall Ramp Length: 3 feet minimum, 5 feet maximum. Overall Product Weight: Each ramp weighs 6 lbs. Weight limit: Each ramp can support 330 lbs. Retracted size: 7 inches wide, 29 inches long.
  • Price: $209.95
  • EZ - Access TRANSITIONS Modular Entry Ramp 1 inch
  • Description: The EZ - Access TRANSITIONS Modular Entry Ramp 1 inch is a 1 inch high lightweight aluminum ramp designed for doorways, sliding glass doors, and raised landings that are 1 inch high. This aluminum portable ramp provides wheelchairs, scooters, walkers and canes easy access over uneven surfaces or a single step. The EZ - Access TRANSITIONS Modular Entry Ramp 1 inch is constructed from high-strength aluminum that will not rust or corrode. This home wheelchair ramp has a modular design and adjustable flap on top. The non-slip surface provides traction and can be used inside or outside. Pre-drilled holes and hardware needed for permanently installation are included. The EZ - Access TRANSITIONS Modular Entry Ramp 1 inch aluminum threshold ramp is easy to install, supports up to 700 pounds and is made in the USA. EZ - Access Incline Chart EZ - Access TRANSITIONS Modular Entry Ramp Instructions EZ - Access TRANSITIONS Modular Entry Ramp Specifications EZ - Access TRANSITIONS Brochure EZ - Access TRANSITIONS Modular Entry Ramp 1 inch Specifications: Material: Aluminum. Usable size: 1 inch high, 6-1/2 inches long, 34 inches wide. Weight: 3 lbs. Weight capacity: 700 lbs. Usage Guidelines: 3/4 to 1-1/4 inch rise. Made in: USA.
  • Price: $36.99
  • Diestco Nosing Ramps
  • Description: Diestco Nosing Ramps make home doorway thresholds with differing heights easier for users to transition. People using a mobility aid will find the solid rubber ramps provide a smooth, safe surface. The Diestco Nosing Ramps are designed for residential entryways and doorways and are available in three different heights and widths. All 3 models measure 36 inches in length. The smooth, solid rubber ramps allow wheelchairs, scooters, canes, walkers, to easily transition over the threshold. Designed for residential use, the ramps can be easily modified to fit in tight spaces and are ideal for entryways and doorways. Made of durable, solid rubber, they offer a non-skid surface for added traction and safety. Diestco Nosing Ramps are easy to install and can be easily modified to fit around molding and tight spaces. Diestco Nosing Ramps Specifications: Choose size: Small, Medium or Large. Small measures: 3/4 inches high, 3 inches wide. Medium measures: 1-1/4 inch high, 3-1/8 inch wide. Large measures: 1-3/4 inch high, 4-3/4 inch wide. Length: 36 inches. Material: Solid rubber ramp. Color: Black. Made in: USA.
  • Price: $65.95
  • Diestco Threshold EZ Edge Ramps
  • Description: The Diestco Threshold EZ Edge Ramps are extremely durable, modular rubber ramps that are ADA approved for residential and commercial use. These portable, slip resistant ramps are available in 3 sizes. The Diestco Threshold EZ Edge Ramps have a 1:12 slope ratio at any height, and are designed to meet specific ADA requirements for safety. The sloped sides provide a smooth transition from any angle for mobility aid users to easily enter doorways and entryways. These easy to install, modify, and use ramps allow wheelchair, scooter, walker and rollator users improved mobility over door thresholds that are not level, and are available in 3 sizes. EZ Edge Small Ramp measures 7/8 inch high, 6 inches wide, 42 inches long. EZ Edge Medium Ramp measures 1-1/4 inches high, 12 inches wide, 42 inches long. EZ Edge Large Ramp measures 2-3/16 inches high, 24 inches wide, 60 inches long. Diestco Threshold EZ Edge Portable Ramps provide a durable, slip resistant, rubber transitional surface for users with limited mobility to increase safety. Diestco Threshold EZ Edge Ramps Specifications: Choose size: Small, Medium, or Large. Small ramp 7/8 inch high, 6 inches wide, 42 inches long, weighs 7.5 lbs. Medium ramp: 1-1/4 inches high, 12 inches wide, 42 inches long, weighs 14 lbs. Large ramp: 2-3/16 inches high, 24 inches wide, 60 inches long, weighs 52 lbs. Material: Solid rubber ramp. Color: Black. Made in: USA.
  • Price: $105.95
  • EZ - Access 2 ft SUITCASE Singlefold Ramp
  • Description: The EZ - Access 2 ft SUITCASE Singlefold Ramp is an ultra-strong, single-fold ramp providing the safety and strength required while remaining lightweight and portable. The ergonomically designed flexible, non-breakable handles offer convenient carrying and a comfortable grip. The Signature Series SUITCASE Singlefold Ramps feature an extruded non-skid tread for superior traction, and a self-adjusting bottom transition plate for easy conversion from ramp to ground. Two independently self-adjusting bottom transition plates easily convert a mobility device from the ramp to any terrain. The hinge features a no-pinch, non-protruding live hinge for safe, silent, and maintenance free operation. The 800 lb weight capacity allows the ramp to safely support power scooters, power wheelchairs and manual wheelchairs. Welded construction provides long-term durability and safety. EZ - Access 2 ft Suitcase Ramp Signature SS2 is an ultra-strong, single-fold ramp that provide safety and strength while remaining lightweight and portable. EZ - Access SUITCASE Singlefold Technical Specifications EZ - Access SUITCASE Singlefold Ramp Instructions EZ - Access SUITCASE Singlefold Ramp Brochure EZ - Access 2 ft SUITCASE Singlefold Ramp Specifications: Usable size: 2 feet long, 30 inches wide. Folded size: 2 feet long, 15 inches wide, 4 inches high. Weight: 9 pounds. Weight capacity: 800 pounds. Made of: Aluminum. Made in: USA. Usage guidelines: Curbs, 1 step.
  • Price: $99.99
  • EZ - Access 8 foot SUITCASE Singlefold Ramp
  • Description: The EZ - Access 8 foot SUITCASE Singlefold Ramp is a single-fold ramp designed to provide safe access while remaining lightweight and portable. Wheelchair, scooter and walker users will find this aluminum folding ramp designed for easy transport. The SUITCASE Singlefold Ramps have an 800 lb weight capacity to safely support power scooters, power wheelchairs and manual wheelchairs. The extruded non-skid tread provides superior traction. Two self-adjusting bottom transition plates provide easy conversion from ramp to ground. The hinge is designed to not pinch and does not protrude, for safe, silent, and maintenance free operation. Ergonomically designed flexible, non-breakable handles offer convenient carrying and a comfortable grip. Welded construction provides long-term durability and safety. EZ - Access 8 foot SUITCASE Singlefold Ramp provides easy access for 2 to 3 steps. EZ - Access SUITCASE Singlefold Technical Specifications EZ - Access SUITCASE Singlefold Ramp Instructions EZ - Access SUITCASE Singlefold Ramp Brochure EZ - Access 8 foot SUITCASE Singlefold Ramp Specifications: Usable size: 8 feet long, 30 inches wide. Folded size: 8 feet long, 15 inches wide, 4 inches high. Weight: 47 lbs. Weight capacity: 800 lbs. Usage guidelines: 2-3 steps, some minivans & SUVs. Made in: USA. Made of: Aluminum.
  • Price: $389.99
  • EZ - Access 3 foot SUITCASE Singlefold Ramp
  • Description: The new EZ - Access 3 foot SUITCASE Singlefold Ramp is a single-fold ramp designed to provide the safety and strength required while remaining lightweight and portable. The 800 lb weight capacity allows the ramp to safely support power scooters, power wheelchairs and manual wheelchairs. The SUITCASE Singlefold Ramps feature an extruded non-skid tread for superior traction. The hinge features a no-pinch, non-protruding live hinge for safe, silent, and maintenance free operation. The ergonomically designed flexible, non-breakable handles offer convenient carrying and a comfortable grip. Made of aluminum with welded construction for long-term durability and safety. Two independently self-adjusting bottom transition plates easily convert a mobility device from the ramp to any terrain. The EZ - Access 3 foot SUITCASE Singlefold Ramp light weight portable ramp safely supports power scooters, power wheelchairs and manual wheelchairs. EZ - Access SUITCASE Singlefold Technical Specifications EZ - Access SUITCASE Singlefold Ramp Instructions EZ - Access SUITCASE Singlefold Ramp Brochure EZ - Access 3 foot SUITCASE Singlefold Ramp Specifications: Usable size: 3 feet wide, 30 inches long. Folded size: 3 feet wide, 15 inches long, 4 inches high. Weight: 17 lbs. Weight capacity: 800 lbs. Made of: Aluminum. Made in: USA. Usage guidelines: Curbs, 1 step.
  • Price: $128.99
  • EZ - Access 4 foot SUITCASE Singlefold Ramp
  • Description: The new EZ - Access 4 foot SUITCASE Singlefold Ramp is an ultra-strong, single-fold ramp with an extruded non-skid tread for superior traction. Mobility aid users will find this folding ramp easy to use. The SUITCASE Singlefold Ramps provide the safety and strength required while remaining lightweight and portable. The extruded non-skid tread provides superior traction for increased safety. Welded construction provides long-term durability and safety. Two independently self-adjusting bottom transition plates easily convert a mobility device from the ramp to any terrain. The hinge features a no-pinch, non-protruding live hinge for safe, silent, and maintenance free operation. The ergonomically designed flexible, non-breakable handles offer convenient carrying and a comfortable grip. The 800 lb weight capacity allows the ramp to safely support power scooters, power wheelchairs and manual wheelchairs. EZ - Access 4 foot SUITCASE Singlefold Ramp provides wheelchair, walker, scooter users an easy to use folding portable ramp. EZ - Access SUITCASE Singlefold Technical Specifications EZ - Access SUITCASE Singlefold Ramp Instructions EZ - Access SUITCASE Singlefold Ramp Brochure EZ - Access 4 foot SUITCASE Singlefold Ramp Specifications: Usable size: 4 feet long, 30 inches wide. Folded size: 4 feet long, 15 inches wide, 4 inches high. Weight: 23 lbs. Weight capacity: 800 lbs. Made of: Aluminum. Made in: USA. Usage guidelines: Curbs, 1 -2 steps.
  • Price: $171.99
  • EZ - Access 5 foot SUITCASE Singlefold Ramp
  • Description: The new EZ - Access 5 foot SUITCASE Singlefold Ramp is a portable ramp with single-fold design. This easy to use ramp sets up quickly and is ideal for scooters and wheelchairs. The SUITCASE Singlefold Ramps feature an extruded non-skid tread for superior traction. The hinge features a no-pinch, non-protruding live hinge for safe, silent, and maintenance free operation. Welded construction provides long-term durability and safety. Two independently self-adjusting bottom transition plates easily convert a mobility device from the ramp to any terrain. The ergonomically designed flexible, non-breakable handles offer convenient carrying and a comfortable grip. The 800 lb weight capacity allows the ramp to safely support power scooters, power wheelchairs and manual wheelchairs. Welded construction provides long-term durability and safety. EZ - Access 5 foot SUITCASE Singlefold Ramp is an ultra-strong, single-fold ramp providing the safety and strength required while remaining lightweight and portable. EZ - Access SUITCASE Singlefold Technical Specifications EZ - Access SUITCASE Singlefold Ramp Instructions EZ - Access SUITCASE Singlefold Ramp Brochure EZ - Access 5 foot SUITCASE Singlefold Ramp Specifications: Usable size: 5 feet long, 30 inches wide. Folded size: 5 feet long, 15 inches wide, 4 inches high. Weight: 25 lbs. Weight capacity: 800 lbs. Made of: Aluminum. Made in: USA. Usage guidelines: Curbs, 1 -2 steps, some minivans.
  • Price: $214.99
  • EZ - Access 6 foot SUITCASE Singlefold Ramp
  • Description: The EZ - Access 6 foot SUITCASE Singlefold Ramp is a portable wheelchair and scooter ramp that folds for easy transport. The new improved ergonomic handle is flexible and non-breakable so that it is easier to carry. The SUITCASE Singlefold Ramps are ultra-strong, single-fold ramps that are made of lightweight aluminum and designed to be portable. The extruded non-skid tread provides superior traction for added safety. The hinge features a no-pinch, non-protruding design for safe, silent, and maintenance free operation. The ergonomically designed flexible, non-breakable handles offer convenient carrying and a comfortable grip. The 800 lb weight capacity allows the ramps to safely support power scooters, power wheelchairs and manual wheelchairs. Welded construction provides long-term durability and safety. Two independently self-adjusting bottom transition plates easily convert a mobility device from the ramp to any terrain. The EZ - Access 6 foot SUITCASE Singlefold Ramp is designed for accessing 1 to 3 steps, and for some minivans and SUV's. EZ - Access SUITCASE Singlefold Technical Specifications EZ - Access SUITCASE Singlefold Ramp Instructions EZ - Access SUITCASE Singlefold Ramp Brochure EZ - Access 6 foot SUITCASE Singlefold Ramp Specifications: Usable size: 6 feet long, 30 inches wide. Folded size: 6 feet long, 15 inches wide, 4 inches high. Weight: 30 lbs. Weight capacity: 800 lbs. Made in: USA. Made of: Aluminum. Usage guidelines: 1-3 steps, some minivans and SUV's.
  • Price: $242.99
  • EZ - Access 7 foot SUITCASE Singlefold Ramp
  • Description: The EZ - Access 7 foot SUITCASE Singlefold Ramp is an ultra-strong, single-fold ramp made of lightweight aluminum. Wheelchair and scooter users will find this portable ramp is designed to provide the safety and strength required while remaining lightweight and portable. The SUITCASE Singlefold Ramps feature an ergonomically designed flexible, non-breakable handles that offer convenient carrying and a comfortable grip. The extruded non-skid tread provides superior traction. The hinge is designed to not pinch or protrude. Two independently self-adjusting bottom transition plates easily convert a mobility device from the ramp to any terrain. Welded construction provides long-term durability and safety. The 800 lb weight capacity allows the ramp to safely support power scooters, power wheelchairs and manual wheelchairs. EZ - Access 7 foot SUITCASE Singlefold Ramp provides mobility aid users safe and easy access for 1 to 3 steps. EZ - Access Incline Chart EZ - Access SUITCASE Singlefold Technical Specifications EZ - Access SUITCASE Singlefold Ramp Instructions EZ - Access SUITCASE Singlefold Ramp Brochure EZ - Access 7 foot SUITCASE Singlefold Ramp Specifications: Usable size: 7 feet long, 30 inches wide. Folded size: 7 feet long, 15 inches wide, 4 inches high. Weight: 41 lbs. Weight capacity: 800 lbs. Made in: USA. Usage guidelines: 1-3 steps, some minivans & SUV's. Made of: Aluminum.
  • Price: $299.99
  • EZ - Access TRANSITIONS Modular Entry Ramp 2 inch
  • Description: The EZ - Access TRANSITIONS Modular Entry Ramp 2 inch provides wheelchairs, scooters, walkers and canes easy access over uneven surfaces or a single step that is 2 inches high. This lightweight aluminum access ramp was designed for doorways, sliding glass doors, and raised landings. The EZ - Access TRANSITIONS Modular Entry Ramp 2 inch is constructed from high-strength aluminum that will not rust or corrode, and the anodized finish resists scratches and won't rust, leaving a clean, attractive appearance. This easy to install, portable, home wheelchair ramp has a modular design and adjustable flap on top. The non-slip surface provides traction and can be used inside or outside. Pre-drilled holes and hardware needed for permanently installation are included. The 2 inch aluminum threshold ramp supports up to 700 pounds and is made in the USA. The EZ - Access TRANSITIONS Modular Entry Ramp 2 inch allows mobility aid users to easily access raised landings, sliding patio doors, a single step or raised entryway. EZ - Access Incline Chart EZ - Access TRANSITIONS Modular Entry Ramp Instructions EZ - Access TRANSITIONS Modular Entry Ramp Technical Specifications EZ - Access TRANSITIONS Brochure EZ Access TRANSITIONS Modular Entry Ramp 2 inch Specifications: Material: Aluminum. Usable size: 2 inches high, 12 inches long, 34 inches wide. Weight: 5.5 lbs. Weight capacity: 700 lbs. Usage Guidelines: 1-3/4 to 2-1/4 inch rise. Made in: USA.
  • Price: $68.99
  • EZ - Access TRANSITIONS Modular Entry Ramp 3 inch
  • Description: The EZ - Access TRANSITIONS Modular Entry Ramp 3 inch is a lightweight modular aluminum threshold ramp ideal for use with wheelchairs, scooters, walkers and canes. This lightweight aluminum access ramp allows easy access over uneven surfaces or a single step, for doorways, sliding glass doors, and raised landings up to 3 inches high. The EZ - Access TRANSITIONS Modular Entry Ramp 3 inch is made of high-strength aluminum construction that will not rust or corrode, and can be used inside or outside. The anodized finish resists scratches and won't rust, leaving a clean, attractive appearance. The durable non-slip surface provides increased traction for added safety. The ramp has pre-drilled holes and hardware needed for permanent installation included. This 3 inch aluminum threshold ramp is easy to install, supports up to 700 pounds and is made in the USA. Wheelchair, walker, scooter and mobility aid users will find the EZ - Access TRANSITIONS Modular Entry Ramp 3 inch provides safe access over a variety of uneven surfaces. EZ - Access Incline Chart EZ - Access TRANSITIONS Modular Entry Ramp Instructions EZ - Access TRANSITIONS Modular Entry Ramp Specifications EZ - Access TRANSITIONS Brochure EZ - Access TRANSITIONS Modular Entry Ramp 3 inch Specifications: Material: Aluminum. Usable size: 3 inches high, 17 inches long, 34 inches wide. Weight: 8 lbs. Weight capacity: 700 lbs. Usage Guidelines: 2-3/4 - 3-1/4 inches rise. Made in: USA.
  • Price: $82.99
  • EZ - Access TRANSITIONS Modular Entry Ramp 4 inch
  • Description: The EZ - Access TRANSITIONS Modular Entry Ramp 4 inch is easy to install and provides access over uneven surfaces, a single step, sliding glass doorways or raised landings. This modular portable access ramp is ideal for use with wheelchairs, scooters, walkers and canes. The EZ - Access TRANSITIONS Modular Entry Ramp 4 inch is a lightweight access ramp is constructed of high strength aluminum that will not rust or corrode, and can be used inside or outside. The anodized finish resists scratches and won't rust, leaving a clean, attractive appearance. Non-slip surface provides added traction for safety. Pre-drilled holes and hardware needed for permanent installation are included. The EZ - Access TRANSITIONS Modular Entry Ramp 4 inch supports up to 700 pounds and is made in the USA. EZ - Access Incline Chart EZ - Access TRANSITIONS Modular Entry Ramp Instructions EZ - Access TRANSITIONS Modular Entry Ramp Specifications EZ - Access TRANSITIONS Brochure EZ - Access TRANSITIONS Modular Entry Ramp 4 inch Specifications: Material: Aluminum. Usable size: 4 inches high, 22-1/4 inches long, 34 inches wide. Weight: 11 lbs. Weight capacity: 700 lbs. Usage Guidelines: 3-3/4 - 4-1/4 inches rise. Made in: USA.
  • Price: $98.99
  • EZ - Access TRANSITIONS Modular Entry Ramp 5 inch
  • Description: The EZ - Access TRANSITIONS Modular Entry Ramp 5 inch is ideal for providing access over sliding glass doorways, a single step, or uneven surfaces up to 5 inches high. This portable ramp is easy to install and provides access for wheelchairs, scooters, walkers and canes. The EZ - Access TRANSITIONS Modular Entry Ramp 5 inch is easy to install and provides access over uneven surfaces, a single step, sliding glass doorways or raised landings. Installation holes are pre-drilled and hardware needed for permanent installation are included. The lightweight ramp is constructed of high strength aluminum that can be used indoors or outdoors and will not rust or corrode. The anodized finish resists scratches, will not rust, and has a non-slip surface which provides traction for increased safety. The 5 inch aluminum threshold ramp supports up to 700 pounds and is made in the USA. Mobility aid users will find the EZ - Access TRANSITIONS Modular Entry Ramp 5 inch easy to install for safe access. EZ - Access Incline Chart EZ - Access TRANSITIONS Modular Entry Ramp Instructions EZ - Access TRANSITIONS Modular Entry Ramp Specifications EZ - Access TRANSITIONS Brochure EZ - Access TRANSITIONS Modular Entry Ramp 5 inch Specifications: Material: Aluminum. Usable size: 5 inches high, 27-1/2 inches long, 34 inches wide. Weight: 15 lbs. Weight capacity: 700 lbs. Usage Guidelines: 4-3/4 - 5-1/4 inches rise. Made in: USA.
  • Price: $122.99
  • EZ - Access TRANSITIONS Modular Entry Ramp 6 inch
  • Description: The EZ - Access TRANSITIONS Modular Entry Ramp 6 inch is constructed of high strength aluminum that can be used indoors or outdoors and will not rust or corrode. Mobility aid users will find the modular ramp design is ideal for providing access over sliding glass doorways, a single step, or uneven surfaces. The EZ - Access TRANSITIONS Modular Entry Ramp 6 inch provides access for mobility aid users including wheelchairs, scooters, walkers, rollators and canes. This lightweight ramp is constructed of high strength aluminum that can be used indoors or outdoors and will not rust or corrode. This portable ramp has an anodized finish that resists scratches and won't rust, and a non-slip surface which provides traction for safety. This easy to install 6 inch high threshold ramp provides access over uneven surfaces, a single step, sliding glass doorways or raised landings. Installation holes are pre-drilled and hardware needed for permanent installation is included. This 6 inch aluminum threshold ramp supports up to 700 pounds and is made in the USA. Mobility aid users will find the EZ - Access TRANSITIONS Modular Entry Ramp 6 inch easy to install for safe access for a variety of surfaces. EZ - Access Incline Chart EZ - Access TRANSITIONS Modular Entry Ramp Instructions EZ - Access TRANSITIONS Modular Entry Ramp Specifications EZ - Access TRANSITIONS Brochure EZ Access TRANSITIONS Modular Entry Ramp 6 inch Specifications: Material: Aluminum. Usable size: 6 inches high, 32-3/4 inches long, 34 inches wide. Weight: 20 lbs. Weight capacity: 700 lbs. Usage Guidelines: 5-3/4 - 6-1/4 inches rise. Made in: USA.
  • Price: $150.99
  • EZ - Access TRANSITIONS Modular Entry Ramp 1.5 inch
  • Description: The EZ - Access TRANSITIONS Modular Entry Ramp 1.5 inch is constructed of high strength aluminum, yet is still lightweight and durable. This portable ramp provides mobility aid users safe access for increased independence. The EZ - Access TRANSITIONS Modular Entry Ramp 1.5 inch modular ramp design is ideal for providing access over sliding glass doorways, a single step, or uneven surfaces up to 1.5 inches high. The anodized finish resists scratches and has a non-slip surface which provides increased traction for safety. This high strength aluminum portable ramp can be used indoors or outdoors and will not rust or corrode. Installation holes are pre-drilled and hardware needed for permanent installation are included. The 1.5 inch aluminum threshold ramp is easy to install, supports up to 700 pounds and is made in the USA. The EZ - Access TRANSITIONS Modular Entry Ramp 1.5 inch is easy to install for safe access for mobility aid users. EZ - Access Incline Chart EZ - Access TRANSITIONS Modular Entry Ramp Instructions EZ - Access TRANSITIONS Modular Entry Ramp Specifications EZ - Access TRANSITIONS Brochure EZ - Access TRANSITIONS Modular Entry Ramp 1.5 inch Specifications: Material: Aluminum. Usable size: 1.5 inches high, 9-1/2 inches long, 34 inches wide. Weight: 5 lbs. Weight capacity: 700 lbs. Usage Guidelines: 1-1/4 - 1-3/4 inches rise. Made in: USA.
  • Price: $51.99
  • EZ - Access SUITCASE Top Lip Extension
  • Description: The EZ - Access SUITCASE Top Lip Extension are optional extensions for the EZ - Access Suitcase Ramps. These extensions are designed to increase the length of the top lip from the standard 3 inches to 9 inches. The EZ - Access SUITCASE Top Lip Extension assists users in transferring wheelchairs and scooters out of SUVs, vans and other large vehicles with extended bumpers. The extensions can be added to or removed from the EZ - Access SUITCASE Ramps as needed. The patented extensions extend the use of aluminum SUITCASE ramps by increasing the standard 3 inch top lip transition plate to 9 inches, allowing these ramps to clear the rear bumper of SUVs and vans. The extensions simply attache to the ramp’s top lip transition plate. The use of a TLE reduces the overall ramp weight capacity to 500 pounds. The extensions have an extruded slip-resistant surface and are made of aluminum for maximum strength. Ramp extensions are intended for unoccupied use only. The EZ - Access SUITCASE Top Lip Extensions make it easier for wheelchairs and scooters to be loaded and unloaded in and out of large vehicles with extended bumpers. EZ - Access SUITCASE Top Lip Extensions Instructions EZ - Access SUITCASE Singlefold Ramp Brochure EZ - Access SUITCASE Top Lip Extensions Specifications: Material: Aluminum with non-skid surface. Weight: 5 lbs. Weight Capacity: 500 lbs (intended for unoccupied use only). Usable size: 8.5 inches wide, 13.75 inches wide, 2-3/8 inches high. Fits: Any of the Signature Series Ramps. Includes: One pair of extensions.
  • Price: $47.99
  • EZ - Access TRANSITIONS Angled Entry Mat 1.5 inch
  • Description: EZ - Access TRANSITIONS Angled Entry Mat 1.5 inch by EZ Access are beveled rubber threshold ramps that are ADA approved. These non-slip portable ramps provide a safe and smooth transition through doorways and raised landings for wheelchairs, walkers and other mobility aids. EZ - Access TRANSITIONS Angled Entry Mats are especially practical for sliding glass doors because they will not interfere with the door tracks. These solid rubber ramps simply sit against the door sill. Customize these ramps to fit a doorway simply by trimming the width edges. To trim for a smaller height, simply cut the ramp using the grooves on the bottom. EZ - Access TRANSITIONS Angled Entry Mats are great for indoor and outdoor use. Since they are lightweight and require no installation, they can be easily moved to another location or doorway. The mat can be trimmed to custom fit threshold heights and doorway widths. People using scooters, wheelchairs, walkers, other mobility aids will find the TRANSITIONS Angled Entry Mats easy to install. These angled entry mats are now available in three colors: Black, Storm Grey, and Hazelnut Brown. EZ - Access TRANSITIONS Angled Entry Mat Instructions EZ - Access TRANSITIONS Angled Entry Mat Specifications EZ - Access TRANSITIONS Brochure EZ - Access TRANSITIONS Angled Entry Mat 1.5 inch Specifications: Material: 100% rubber from recycled tires. Usable Width: 36 inches. Dimensions: 1.5 inches high, 14 inches long, 40 inches wide. Product weighs: 14 lbs. Made in: USA.
  • Price: $109.95
  • EZ - Access TRANSITIONS Angled Entry Mat 2.5 inch
  • Description: EZ - Access TRANSITIONS Angled Entry Mat 2.5 inch by EZ Access are non-slip portable ramps provide a safe and smooth transition through doorways and raised landings for wheelchairs, walkers and other mobility aids. These ADA approved portable threshold ramps and are made from 100% recycled tires. EZ - Access TRANSITIONS Angled Entry Mats are lightweight and require no installation, they can be easily moved to another location or doorway. These solid rubber ramps simply sit against the door sill, and are especially practical for sliding glass doors because they will not interfere with the door tracks. Customize these ramps to fit a doorway simply by trimming the width edges. To trim for a smaller height, simply cut the ramp using the grooves on the bottom. These angled entry mats are now available in three colors: Black, Storm Grey, and Hazelnut Brown. EZ - Access TRANSITIONS Angled Entry Mats are great for indoor and outdoor use. EZ - Access TRANSITIONS Angled Entry Mat Instructions EZ - Access TRANSITIONS Angled Entry Mat Specifications EZ - Access TRANSITIONS Brochure EZ - Access TRANSITIONS Angled Entry Mat 2.5 inch Specifications: Material: 100% rubber from recycled tires. Usable Width: 36 inches. Dimensions: 2.5 inches high, 14 inches long, 40 inches wide. Product weighs: 40 lbs. Made in: USA.
  • Price: $157.99
  • EZ - Access TRANSITIONS Modular Entry Mats Set of 4
  • Description: The EZ - Access TRANSITIONS Modular Entry Mats Set of 4 rubber entry mats provide a smooth transition for wheelchair access and are ADA approved. The set includes 2 wedge mats and 2 risers made of slip-resistant rubber ramps designed for doorway thresholds up to 4.75 inches high. EZ - Access TRANSITIONS Modular Entry Mats Set of 4 includes 2 of the 2.5 inch high Beveled Rubber Threshold Ramps, and the pair of Transitions Modular Risers. These easy to install wedge mats can be used for exits and entryways, both indoors and outdoors, to meet a variety of needs. The mats sit directly against the door sill to provide a smooth transition, and are especially practical for sliding glass doors since they will not interfere with the door track. Each mat measures 48 inches wide and 24 inches long, and can be easily trimmed for lower threshold heights and widths. These 2.5 inch high entry mats are combined with the TRANSITIONS Modular Rubber Risers to create a ramp with maximum height of 4 inches. EZ - Access TRANSITIONS Modular Entry Mats Instructions EZ - Access TRANSITIONS Modular Entry Mats Specifications EZ - Access TRANSITIONS Modular Entry Mats Set of 4 Specifications: Includes: 2 of the EZ - Access 2.5 inch TRANSITIONS Angled Entry Mats, and the pair of EZ - Access TRANSITIONS Modular Risers. Weight Capacity: 850 lbs. Usable Size: 48 inches wide, 24 inches long, 2.5 inches high. Material: Recycled rubber. Weight: 40 lbs. Made in: USA.
  • Price: $559.95
  • EZ - Access TRANSITIONS Modular Entry Mats Set of 2
  • Description: The EZ - Access TRANSITIONS Modular Entry Mats Set of 2 can be used with the Modular Entry Mats to create a custom rubber ramps up to 4.75 inches high. These slip resistant rubber risers provide smooth surface transition for mobility equipment. The EZ - Access TRANSITIONS Modular Entry Mats Set of 2 are ADA approved, slip-resistant portable risers for doorways and raised landings. Each riser measures 24 inches wide, 24 inches long, and 2.25 inches high. If door threshold is greater than the height of the Modular Entry Mat (2.5 inches high), two Modular Entry Mats along with this pair of Risers can be combined to accommodate a rise up to 4.75 inches high. To create a ramp that is 48 inches long, 48 inches wide, 4.75 inches high, order two EZ - Access Transitions Modular Entry Mats and two EZ - Access TRANSITIONS Modular Risers. The risers are made of 100% recycled tires and can be used indoors and outdoors. Durable, long lasting EZ - Access TRANSITIONS Modular Entry Mats Set of 2 are made of 100% recycled tires. EZ - Access TRANSITIONS Modular Entry Mat Instructions EZ - Access TRANSITIONS Modular Entry Mat Specifications EZ - Access TRANSITIONS Brochure EZ - Access TRANSITIONS Modular Entry Mats Set of 2 Specifications: Weight Capacity: 850 lbs. Usable Size of each riser: 24 inches wide, 24 inches long, 2.25 inches high. Material: Recycled rubber. Weight: 40 lbs. Made in: USA.
  • Price: $139.95
  • EZ - Access SUITCASE TRIFOLD AS Ramp 10 foot
  • Description: The EZ - Access SUITCASE TRIFOLD AS Ramp 10 foot is a portable folding ramp that provides the ideal length for wheelchairs, walkers and scooters to easily access steps, vehicles, and raised landings. This easy to transport ramp features a self-adjusting bottom transition plate for easy steering from ramp to ground. EZ - Access SUITCASE TRIFOLD AS Ramp 10 foot features an applied anti-slip coating with raised edges, which helps improve traction and reduce the risk of falls. Mobility aid users who need extra assistance going up and down steps will benefit greatly by implementing this portable ramp. The ramp can be placed over 2 to 4 steps, providing an easier transition for persons with walking difficulty. This durable folding ramp was designed to be quickly separated into two individual sections. By removing two hinge pins, the ramp easily separates into two lightweight halves, each with their own carrying handle. The area of the unfolded platform is 29 inches wide. The ramp can also support up to 800 pounds of weight and comes with a 3-year limited warranty. The EZ - Access SUITCASE TRIFOLD AS Ramp 10 foot is made in the USA! EZ - Access SUITCASE TRIFOLD AS Ramp Instructions EZ - Access SUITCASE TRIFOLD AS Ramp Specifications EZ - Access SUITCASE Ramp Brochure EZ - Access SUITCASE TRIFOLD AS Ramp 10 foot Specifications: Made of: Aluminum. Usable size: 10 feet long, 29.5 inches wide. Folded size: 60.75 inches long, 15 inches wide, 11.5 inches high. Weight per section: 30 lbs. Weight capacity: 800 lbs. Usage guidelines: 2 to 4 steps, some minivans, and SUV's. Manufactured in: USA.
  • Price: $544.99
  • EZ - Access SUITCASE TRIFOLD AS Ramp 5 foot
  • Description: The EZ - Access SUITCASE TRIFOLD AS Ramp 5 foot is an easy to fold and transport ramp for mobility aid users to transition over 1 to 2 steps. Mobility aid users will find this ramp helpful for increasing independence. The EZ - Access SUITCASE TRIFOLD AS Ramp 5 foot is designed to be quickly separated into two individual sections. By removing two hinge pins, the ramp separates into two lightweight halves, each with their own carrying handle. The self-adjusting bottom transition plate for easy maneuvering a wheelchair or scooter from the ramp to the ground. The ramp also features an applied, high-quality skid-resistant surface with raised edges, which helps improve safety. This portable folding ramp provides the ideal length for wheelchairs, walkers and scooters to easily access curbs, 1 to 2, and raised landings. Users with mobility limitations who need extra assistance going up and down steps will benefit greatly by implementing this portable ramp. The area of the unfolded platform measures 29 inches wide. The ramp can support up to 800 pounds of weight. The EZ - Access SUITCASE TRIFOLD AS Ramp 5 foot is made in the USA. EZ - Access SUITCASE TRIFOLD AS Ramp Instructions EZ - Access SUITCASE TRIFOLD AS Ramp Specifications EZ - Access SUITCASE Ramp Brochure EZ - Access SUITCASE TRIFOLD AS Ramp 5 foot Specifications: Made of: Aluminum. Usable size: 5 feet long, 29.5 inches wide. Folded size: 30.75 inches long, 15 inches wide, 11.5 inches high. Weight per section: 16 lbs. Weight capacity: 800 lbs. Usage guidelines: Curbs, 1 to 2 steps, and some minivans. Made in: USA.
  • Price: $250.99
  • EZ - Access SUITCASE TRIFOLD AS Ramp 6 foot
  • Description: The EZ - Access SUITCASE TRIFOLD AS Ramp 6 foot is a portable folding ramp that provides the ideal length for wheelchairs, walkers and scooters to easily access steps, vehicles, and raised landings. This six foot long folding ramp features a self-adjusting bottom transition plate for easy maneuvering from ramp to ground. The EZ - Access SUITCASE TRIFOLD AS Ramp 6 foot is ideal for providing accessibility over 1 to 3 steps for wheelchairs, scooters, mobility aids users, or people with walking difficulty. Persons with physical limitations who need extra assistance going up and down steps will benefit greatly by implementing this portable ramp. The applied, high-quality skid-resistant surface with raised edges help improve safety and reduce the risk of falls. The suitcase style folding 6 foot ramp was designed to be quickly separated into two individual sections. By removing two hinge pins, the ramp easily separates into two lightweight halves, each with their own carrying handle. The area of the unfolded platform is 29 inches wide, and the ramp can also support up to 800 pounds of weight. The EZ - Access SUITCASE TRIFOLD AS Ramp 6 foot is made in the USA!. EZ - Access SUITCASE TRIFOLD AS Ramp Instructions EZ - Access SUITCASE TRIFOLD AS Ramp Specifications EZ - Access SUITCASE Ramp Brochure EZ - Access SUITCASE TRIFOLD AS Ramp 6 foot Specifications: Made of: Aluminum. Usable size: 6 feet long, 29.5 inches wide. Folded size: 36.75 inches long, 15 inches wide, 11.5 inches high. Weight per section: 19 lbs. Weight capacity: 800 lbs. Usage guidelines: 1 to 3 steps, some minivans, and SUV's. Manufactured in: USA.
  • Price: $282.99
  • EZ - Access SUITCASE TRIFOLD AS Ramp 7 foot
  • Description: The EZ - Access SUITCASE TRIFOLD AS Ramp 7 foot is a folding, portable ramp made from aircraft-quality aluminum. This ramp features an applied, slip-resistant surface and self-adjusting bottom transition plates for easy conversion from ramp to ground. EZ - Access SUITCASE TRIFOLD AS Ramp 7 foot can be placed over 1 to 3 steps, providing an easier transition for mobility aid users. This ramp is designed to be quickly separated into two individual sections. By removing two hinge pins, the ramp easily separates into two lightweight halves, each with their own carrying handle. This portable folding ramp provides the ideal length for wheelchairs, walkers and scooters to easily access 1 to 3 steps, vehicles, and raised landings. The self-adjusting bottom transition plates provide easy transitioning from ramp to ground. The ramp also features an applied non-skid surface with raised edges, which helps improve traction and reduce the risk of falls. Wheelchair, walker, and scooter users who need extra assistance going up and down steps will benefit greatly by implementing this portable ramp. The area of the unfolded platform is 29 inches wide, and the ramp can support up to 800 pounds of weight. The EZ - Access SUITCASE TRIFOLD AS Ramp 7 foot is made in the USA. EZ - Access SUITCASE TRIFOLD AS Ramp Instructions EZ - Access SUITCASE TRIFOLD AS Ramp Specifications EZ - Access SUITCASE Ramp Brochure EZ - Access SUITCASE TRIFOLD AS Ramp 7 foot Specifications: Made of: Aluminum. Usable size: 7 feet long, 29.5 inches wide. Folded size: 42.75 inches long, 15 inches wide, 11.5 inches high. Weight per section: 22 lbs. Weight capacity: 800 lbs. Usage guidelines: 1 to 3 steps, some minivans, and SUV's. Manufactured in: USA.
  • Price: $313.99
  • EZ - Access SUITCASE TRIFOLD AS Ramp 8 foot
  • Description: The EZ - Access SUITCASE TRIFOLD AS Ramp 8 foot is a portable folding ramp that provides the ideal length for wheelchairs, walkers and scooters to easily access steps, vehicles, and raised landings. Ramp features a self-adjusting bottom transition plate for easy steering from ramp to ground. The EZ - Access SUITCASE TRIFOLD AS Ramp 8 foot is designed to allow wheelchair and scooter users to easily cross over 2 to 3 steps. This aluminum ramp measures 8 feet long, and easily folds into 2 four foot sections. By removing two hinge pins, the ramp easily separates into two lightweight halves, each with their own carrying handle. The applied anti-slip coating improves traction for increased safety and reduces the risk of falls. The raised edges provided added safety. Mobility aid users will find this portable ramp easy to use for loading their wheelchair or scooter into a van or SUV. The ramp can be placed over 2 to 3 steps, providing an easier transition for persons with walking difficulty. The area of the unfolded platform is 29 inches wide, and the ramp support up to 800 pounds of weight. The EZ - Access SUITCASE TRIFOLD AS Ramp 8 foot is made in the USA. EZ - Access SUITCASE TRIFOLD AS Ramp Instructions EZ - Access SUITCASE TRIFOLD AS Ramp Specifications EZ - Access SUITCASE Ramp Brochure EZ - Access SUITCASE TRIFOLD AS Ramp 8 foot Specifications: Made of: Aluminum. Usable size: 8 feet long, 29.5 inches wide. Folded size: 48.75 inches long, 15 inches wide, 11.5 inches high. Weight per section: 25 lbs. Weight capacity: 800 lbs. Usage guidelines: 2 to 3 steps, some minivans, and SUV's. Manufactured in: USA.
  • Price: $397.99
  • EZ - Access 12 Inch TRANSITIONS Angled Entry Ramp
  • Description: The EZ - Access 12 Inch TRANSITIONS Angled Entry Ramp is a portable entry ramp with adjustable legs and swivel feet. This free-standing ramp is ideal for areas with uneven threshold surfaces. The EZ - Access 12 Inch Transitions Angled Ramp has adjustable legs which allow for vertical adjustment ranging from 1-15/16 to 2-3/4 inches in height. The adjustable legs make this portable threshold ramp ideal for doorways that swing in and out, uneven surfaces or single step rises. Made completely out of high-strength aluminum with an extruded tread surface, the ramp provides users a non-slip surface for safe entry and exit. Mobility aid users will find this durable aluminum portable ramp ideal for safe access across thresholds that are uneven. The EZ - Access 12 Inch TRANSITIONS Angled Entry Ramp is completely free standing. EZ - Access TRANSITIONS Angled Ramp Instructions EZ - Access TRANSITIONS Angled Ramp Specifications EZ - Access TRANSITIONS Brochure EZ - Access 12 inch TRANSITIONS Angled Entry Ramp Specifications: Materials: Aluminum, slip-resistant surface. Usable size: 12 inches long, 36 inches wide, 1-3/8 inch high. Item weight: 5.15 lbs. Weight capacity: 700 lbs. Height adjusts: 1-15/16 to 2-3/4 inches. Model: TAER 12. Made in: USA.
  • Price: $77.99
  • EZ - Access 24 Inch TRANSITIONS Angled Ramp
  • Description: The EZ - Access 24 Inch TRANSITIONS Angled Ramp is an adjustable free standing ramp with swivel feet for doorways with uneven threshold surfaces. The adjustable legs make this portable threshold ramp ideal for doorways that swing in and out, uneven surfaces or single step rises. The EZ - Access 24 Inch TRANSITIONS Angled Ramp includes two sizes of swivel feet. The 1-1/2 inch swivel feet adjust from 2-1/8 to 3-3/8 inches, and the 2-1/2 inch swivel feet adjust from 3-3/16 to 4-3/8 inches. The adjustable legs make this portable threshold ramp ideal for doorways that swing in and out, uneven surfaces or single step rises. Made completely out of high-strength aluminum with an extruded tread surface, the ramp provides a non-slip surface for safety. People with limited mobility using a wheelchair, scooter or walker will find this ramp provides a smooth transition across uneven thresholds. The EZ - Access 24 Inch TRANSITIONS Angled Ramp has a 700 pound weight capacity and is made in USA. EZ - Access TRANSITIONS Angled Ramp Instructions EZ - Access TRANSITIONS Angled Ramp Specifications EZ - Access TRANSITIONS Brochure EZ - Access 24 Inch TRANSITIONS Angled Ramp Specifications: Materials: Aluminum, slip-resistant surface. Usable size: 24 inches long, 36 inches wide, 1-11/16 inch high. Item weight: 10.4 lbs. Weight capacity: 700 lbs. Height adjusts: 2-1/8 to 3-3/8 inches, 3-3/16 to 4-3/8 inches. Model: TAER 24. Made in: USA.
  • Price: $121.99
  • EZ - Access 36 Inch TRANSITIONS Angled Ramp
  • Description: The EZ - Access 36 Inch TRANSITIONS Angled Ramp is a free standing, portable ramp with adjustable swivel feet. For doorways with uneven threshold surfaces, doors that swing in and out, or angled surfaces, this ramp is easy to install and adjust to provide a smooth transition for wheelchair, scooter and walker users. The TRANSITIONS Angled 36 inch Ramp includes 2-1/2 inch swivel feet to adjust the ramp height from 3-5/8 to 5-7/8 inches. Made completely out of high-strength aluminum with an extruded tread surface, the ramp provides a non-slip surface for safety. People with limited mobility using a wheelchair, scooter or walker will find this ramp provides a smooth transition across uneven thresholds. The EZ - Access 36 Inch TRANSITIONS Angled Ramp has a 700 pound weight capacity and is made in the USA. EZ - Access TRANSITIONS Angled Ramp Instructions EZ - Access TRANSITIONS Angled Ramp Specifications EZ - Access TRANSITIONS Brochure EZ - Access 36 Inch TRANSITIONS Angled Ramp Specifications: Materials: Aluminum, slip-resistant surface. Usable size: 36 inches long, 36 inches wide, 3-1/2 inch high. Item weight: 15.5 lbs. Weight capacity: 700 lbs. Height adjusts: 3-5/8 to 5-7/8 inches. Model: TAER 36. Made in: USA.
  • Price: $166.99
  • EZ - Access TRANSITIONS 12 Inch Angled Entry Plate
  • Description: The EZ - Access TRANSITIONS 12 Inch Angled Entry Plate is a stand-alone threshold ramp that allows mobility aid users to easily cross thresholds up to 2 inches high. This portable threshold plate with slip-resistant surface that is easy to install and use. The EZ - Access TRANSITIONS 12 Inch Angled Entry Plate is a single-piece, formed aluminum ramp that will not rust or corrode over time and accommodates most mobility devices. The 12 inch long solid ramp has a durable applied tread that provides a slip resistant surface for a variety of conditions. People using mobility devices will find this portable ramp helpful for eliminating trip hazards. This easy to install solid plate enables people with wheelchairs, walkers, scooters, canes, to safely cross offset floors. The plate measures 12 inches long, 32 inches wide to provide a smooth transition surface for thresholds up to 2 inches high. The EZ - Access TRANSITIONS 12 Inch Angled Entry Plate has a 700 pound weight capacity and is made in USA. EZ - Access TRANSITIONS Angled Entry Plate Instructions EZ - Access TRANSITIONS Angled Entry Plate Specifications EZ - Access TRANSITIONS Brochure Buy 3 or more and Save $$. Click on Quantity Discount Pricing Above. EZ - Access TRANSITIONS 12 Inch Angled Entry Plate Specifications: Overall dimensions: 12 inches long, 32 inches wide, 0.695 inch high. Usable height: Up to 2 inches. Capacity: 700 lbs. Item weight: 5 lbs. Material: High-strength aluminum. Made in: USA.
  • Price: $59.99
  • EZ - Access TRANSITIONS 8 Inch Angled Entry Plate
  • Description: The EZ - Access TRANSITIONS 8 Inch Angled Entry Plate is a solid, one piece portable ramp with slip-resistant surface. This stand alone ramp allows people using a mobility aid to easily cross thresholds up to 1-5/16 inches high. The EZ - Access TRANSITIONS 8 Inch Angled Entry Plate is a single-piece, formed aluminum ramp will not rust or corrode over time. This 8 inch long portable threshold plate is easy to install and use. The durable applied tread provides a slip resistant surface that increases safety in a various conditions. Mobility aid users will find this portable ramp helpful for eliminating trip hazards. This portable, easy to install threshold plate allows wheelchairs, walkers and scooters to easily cross thresholds up to 1-5/16 inches high. The EZ - Access TRANSITIONS 8 Inch Angled Entry Plate measures 8 inches long, 32 inches high and has a 700 pound weight capacity. EZ - Access TRANSITIONS Angled Entry Plate Instructions EZ - Access TRANSITIONS Angled Entry Plate Specifications EZ - Access TRANSITIONS Brochure Buy 3 or more and Save $$. Click on Quantity Discount Pricing Above. EZ - Access TRANSITIONS 8 Inch Angled Entry Plate Specifications: Overall dimensions: 8 inches long, 32 inches wide, 0.695 inch high. Usable height: Up to 1-5/16 inches. Capacity: 700 lbs. Item weight: 3.5 lbs. Material: High-strength aluminum. Made in: USA.
  • Price: $51.99
  • EZ - Access TRANSITIONS 10 Inch Angled Entry Plate
  • Description: The EZ - Access TRANSITIONS 10 Inch Angled Entry Plate is a portable, easy to install threshold plate. Mobility aid users will find this stand-alone ramp has a slip-resistant surface for increased safety when crossing over thresholds up to 1-5/8 inches high. The TRANSITIONS 10 Inch Angled Entry Plate won't rust or corrode over time. The single-piece, formed aluminum plate has applied tread to increase traction. This entry ramp helps eliminate trip hazards and accommodates most mobility devices. This durable, angled threshold plate measures 10 inches long, 32 inches wide and provides a smooth transition over thresholds up to 1-5/8 inches high. The EZ - Access TRANSITIONS 10 Inch Angled Entry Plate has a 700 pound weight capacity and is made in the USA. EZ - Access TRANSITIONS Angled Entry Plate Instructions EZ - Access TRANSITIONS Angled Entry Plate Specifications EZ - Access TRANSITIONS Brochure Buy 3 or more and Save $$. Click on Quantity Discount Pricing Above. EZ - Access TRANSITIONS Angled Entry Plate 10 inch Specifications: Overall dimensions: 10 inches long, 32 inches wide, 0.695 inch high. Usable height: Up to 1-5/8 inch. Capacity: 700 lbs. Item weight: 4.25 lbs. Material: High-strength aluminum. Made in: USA.
  • Price: $56.99
  • Duro-Med Telescoping 5 Foot Wheelchair Ramps
  • Description: The Duro-Med Telescoping 5 Foot Wheelchair Ramps are adjustable ramps that provide easy wheelchair access to rooms that have steps. Arthritis users in wheelchairs will find that the retractable ramps make it easier to visit friends or family whose homes are not wheelchair accessible. The Telescoping 5 Foot Wheelchair Ramps are portable, compact, and easy to store: each ramp weighs 6 pounds and is 60 inches long and 7 inches wide. Although they are light, each ramp can support 330 pounds. The ramps can extend from 3 to 5 feet so that they can be used on different step sizes and heights. To extend the ramps, pull sections 1 and 2 until the locking buttons are fully extended into the holes and snap into place. After use, simply retract them and store them in the convenient nylon carrying bag. These ramps will work for rises us to 10 inches and have an inner track area of 4 inches. Duro-Med Telescoping 5 Foot Wheelchair Ramps Specifications: Width: 7 inches wide overall, 4 inches inside tracks. Overall Ramp Length: 3 feet minimum, 5 feet maximum. Overall Product Weight: Each ramp weighs 6 lbs. Weight limit: Each ramp can support 330 lbs.
  • Price: $209.95
  • EZ-Access TRANSITIONS Modular Entry Ramp 1 inch
  • Description: The EZ-Access TRANSITIONS Modular Entry Ramp 1 inch is a lightweight aluminum portable ramp for doorways, sliding glass doors and entry ways. The 34 inch wide ramp is ideal for all types of wheelchairs, scooters, walkers, and canes. This threshold ramp may be used either one by itself or two combined to make an entry or exit convenient and safe. The EZ-Access TRANSITIONS Modular Entry Ramp 1 inch features a freestanding design that provides a sturdy, secure and seam-free surface that is easy to install. This lightweight aluminum portable ramp provides easy access over uneven surfaces or single steps for wheelchair, walkers, scooters, power chairs. Made of high-strength aluminum that will not rust or corrode, the non-slip surface provides traction and can be used inside or outside. To make installation easier, the foot section has pre-drilled holes, the top flap is adjustable for secure anchoring, and the needed hardware to permanently mount the ramp is included. This portable aluminum ramp is ideal for doorways, a single step, thresholds, sliding patio doors and raised landings. The solid aluminum ramp supports up to 700 pounds and is made in the USA. The EZ-Access TRANSITIONS Modular Entry Ramp 1 inch modular design allows the ramp to be customized by easily adding or removing interchangeable extensions as needed to accommodate the threshold. EZ-Access TRANSITIONS Modular Entry Ramps are available in 1, 1-1/2, 2, 3, 4, 5, and 6 inch heights. EZ-Access TRANSITIONS Modular Entry Ramp Instructions EZ-Access TRANSITIONS Modular Entry Ramp Specifications EZ-Access TRANSITIONS Brochure EZ-Access TRANSITIONS Modular Entry Ramp 1 inch Specifications: Rise: 1 inch. Weight: 3 lbs. Usable size: 1 inch high, 6-1/2 inches long, 34 inches wide. Weight capacity: 700 lbs. Range of Use: 3/4 to 1-1/4 inch.
  • Price: $36.99
  • EZ-Access TRANSITIONS Modular Entry Ramp 2 inch
  • Description: The EZ-Access TRANSITIONS Modular Entry Ramp 2 inch is a 34 inch wide ramp that is ideal for all types of wheelchairs, scooters, walkers, and canes. This lightweight aluminum portable ramp provides access for doorways, sliding glass doors and thresholds that are 1 inch high. EZ-Access TRANSITIONS Modular Entry Ramp 2 inch high threshold ramp may be used either one by itself or combine 2 together to make an entry or exit convenient and safe. The freestanding design makes it easy to install. It is constructed of anodized aluminum that will not rust or corrode, and can be used indoors or out. The non-skid surface provides traction for safety. is a durable and safe access ramp that smoothly bridges 2 inch high thresholds, doorways, and sliding door entry points. This lightweight modular ramp allows wheelchairs, power chairs, walkers and mobility scooters convenient access to exit and entryways. This ramp is easy to-install with the pre-drilled holes for permanent attachment. This 2 inch high portable ramp allows users with wheelchairs, walkers, scooters, canes, to safely cross doorways, a single step, thresholds, sliding patio doors and raised landings. The EZ-Access TRANSITIONS Modular Entry Ramp 2 inch provides users safe access over thresholds that are 2 inches high. The EZ-Access TRANSITIONS Modular Entry Ramp is available in 1, 1-1/2, 2, 3, 4, 5, and 6 inch heights. EZ-Access TRANSITIONS Modular Entry Ramp Instructions EZ-Access TRANSITIONS Modular Entry Ramp Specifications EZ-Access TRANSITIONS Brochure EZ-Access TRANSITIONS Modular Entry Ramp 2 inch Specifications: Rise: 2 inch. Weight: 5-1/2 lbs. Usable size: 2 inches high, 12 inches long, 34 inches wide. Weight capacity: 700 lbs. Range of Use: 1-3/4 to 2-1/4 inch rise.
  • Price: $68.99
  • EZ-Access TRANSITIONS Modular Entry Ramp 3 inch
  • Description: The EZ-Access TRANSITIONS Modular Entry Ramp 3 inch is a 3 inch high aluminum ramp with non-skid surface. This lightweight modular ramp has a width of 34 inches that is ideal for all types of wheelchairs, scooters, walkers, and canes. The ramp provides access for doorways, sliding glass doors and thresholds that are 3 inches high. The EZ-Access TRANSITIONS Modular Entry Ramp 3 inch is a 34 inch wide ramp that is ideal for all types of wheelchairs, scooters, walkers, and canes. This lightweight aluminum portable ramp provides access for doorways, sliding glass doors and thresholds that are 1 inch high. This 3 inch high threshold ramp may be used either one by itself or combine 2 together to make an entry or exit convenient and safe. The freestanding design makes it easy to install. Constructed of anodized aluminum that will not rust or corrode, this easy to install ramp and can be used indoors or out. The non-skid surface provides traction for safety. This durable and safe access ramp smoothly bridges 3 inch high thresholds, doorways, and sliding door entry points. This lightweight modular ramp allows wheelchairs, power chairs, walkers and mobility scooters convenient access to exit and entryways. This ramp is easy to-install with the pre-drilled holes for permanent attachment. The EZ-Access TRANSITIONS Modular Entry Ramp 3 inch provides users safe access over thresholds that are 3 inches high. The EZ-Access TRANSITIONS Modular Entry Ramp is available in 1, 1-1/2, 2, 3, 4, 5, and 6 inch heights. EZ-Access TRANSITIONS Modular Entry Ramp Instructions EZ-Access TRANSITIONS Modular Entry Ramp Specifications EZ-Access TRANSITIONS Brochure EZ-Access TRANSITIONS Modular Entry Ramp 3 inch Specifications: Rise: 3 inches. Weight: 8 lbs. Usable size: 3 inches high, 17 inches long, 34 inches wide. Weight capacity: 700 lbs. Range of Use: 2-3/4 to 3-1/4 inch rise.
  • Price: $82.99
  • EZ-Access TRANSITIONS Modular Entry Ramp 4 inch
  • Description: The EZ-Access TRANSITIONS Modular Entry Ramp 4 inch is a non-skid aluminum ramp with a four inch rise. This lightweight modular ramp is 34 inches wide and ideal for all types of wheelchairs, scooters, walkers, and canes. The portable ramp provides access for doorways, sliding glass doors and thresholds that are 4 inches high. The EZ-Access TRANSITIONS Modular Entry Ramp 4 inch ramp is made of anodized aluminum, will not rust or corrode, and can be used indoors or out. This 34 inch wide, lightweight aluminum portable ramp provides access for doorways, sliding glass doors and thresholds that are 4 inches high. This 4 inch high threshold ramp may be used either one by itself or combine 2 together to make an entry or exit convenient and safe. The freestanding design makes it easy to install. Constructed of anodized aluminum that will not rust or corrode, this easy to install ramp and can be used indoors or out. The non-skid surface provides traction for safety. This durable and safe access ramp smoothly bridges 4 inch high thresholds, doorways, and sliding door entry points. This lightweight modular ramp allows wheelchairs, power chairs, walkers and mobility scooters convenient access to exit and entryways. This ramp is easy to-install with the pre-drilled holes for permanent attachment. The EZ-Access TRANSITIONS Modular Entry Ramp 4 inch provides users safe access over thresholds that are 4 inches high. The EZ-Access TRANSITIONS Modular Entry Ramp is available in 1, 1-1/2, 2, 3, 4, 5, and 6 inch heights. EZ-Access TRANSITIONS Modular Entry Ramp Instructions EZ-Access TRANSITIONS Modular Entry Ramp Specifications EZ-Access TRANSITIONS Brochure EZ-Access TRANSITIONS Modular Entry Ramp 4 inch Specifications: Rise: 4 inches. Weight: 11 lbs. Usable size: 4 inches high, 22-1/4 inches long, 34 inches wide. Weight capacity: 700 lbs. Range of Use: 3-3/4 to 4-1/4 inch rise.
  • Price: $98.99
  • EZ-Access TRANSITIONS Modular Entry Ramp 5 inch
  • Description: The EZ-Access TRANSITIONS Modular Entry Ramp 5 inch is a durable aluminum ramp with a five inch rise. This lightweight ramp provides access for curbs, steps, and thresholds that are 5 inches high. EZ-Access TRANSITIONS Modular Entry Ramp 5 inch is 34 inches wide, making it ideal for all types of wheelchairs, scooters, walkers, and canes. This lightweight aluminum portable ramp provides access for doorways, sliding glass doors and thresholds that are 5 inches high. This 5 inch high threshold ramp may be used either one by itself or combine 2 together to make an entry or exit convenient and safe. The freestanding design makes it easy to install. Constructed of anodized aluminum that will not rust or corrode, this easy to install ramp and can be used indoors or out. The non-skid surface provides traction for safety. This durable and safe access ramp smoothly bridges 5 inch high thresholds, doorways, and sliding door entry points. This lightweight modular ramp allows wheelchairs, power chairs, walkers and mobility scooters convenient access to exit and entryways. This ramp is easy to-install with the pre-drilled holes for permanent attachment. The EZ-Access TRANSITIONS Modular Entry Ramp 5 inch provides users safe access over thresholds that are 5 inches high. The EZ-Access TRANSITIONS Modular Entry Ramp is available in 1, 1-1/2, 2, 3, 4, 5, and 6 inch heights. EZ-Access TRANSITIONS Modular Entry Ramp Instructions EZ-Access TRANSITIONS Modular Entry Ramp Specifications EZ-Access TRANSITIONS Brochure EZ-Access TRANSITIONS Modular Entry Ramp 5 inch Specifications: Rise: 5 inches. Weight: 15 lbs. Usable size: 5 inches high, 27-1/2 inches long, 34 inches wide. Weight capacity: 700 lbs. Range of Use: 4-3/4 to 5-1/4 inch rise.
  • Price: $122.99
  • EZ-Access TRANSITIONS Modular Entry Ramp 6 inch
  • Description: The EZ-Access TRANSITIONS Modular Entry Ramp 6 inch is a lightweight aluminum ramp with a six inch rise. This lightweight ramp provides access for curbs, steps, and thresholds that are 5 inches high. EZ-Access TRANSITIONS Modular Entry Ramp 6 inch high threshold ramp may be used either one by itself or combine 2 together to make an entry or exit convenient and safe. This lightweight aluminum portable ramp provides access for doorways, sliding glass doors and thresholds that are 6 inches high. The freestanding design makes it easy to install. Constructed of anodized aluminum that will not rust or corrode, this easy to install ramp and can be used indoors or out, and the non-skid surface provides traction for safety. This durable and safe access ramp smoothly bridges 6 inch high thresholds, doorways, and sliding door entry points. This ramp is easy to-install with the pre-drilled holes for permanent attachment. This lightweight modular ramp allows wheelchairs, power chairs, walkers and mobility scooters convenient access to exit and entryways. The EZ-Access TRANSITIONS Modular Entry Ramp 6 inch provides users safe access over thresholds that are 6 inches high. The EZ-Access TRANSITIONS Modular Entry Ramp is available in 1, 1-1/2, 2, 3, 4, 5, and 6 inch heights. EZ-Access TRANSITIONS Modular Entry Ramp Instructions EZ-Access TRANSITIONS Modular Entry Ramp Specifications EZ-Access TRANSITIONS Brochure EZ-Access TRANSITIONS Modular Entry Ramp 6 inch Specifications: Rise: 6 inches. Weight: 20 lbs. Usable size: 6 inches high, 32-3/4 inches long, 34 inches wide. Weight capacity: 700 lbs. Range of Use: 5-3/4 to 6-1/4 inch rise.
  • Price: $150.99
  • EZ-Access TRANSITIONS Modular Entry Ramp 1.5 inch
  • Description: The EZ-Access TRANSITIONS Modular Entry Ramp 1.5 inch is a lightweight aluminum ramp with a one and half inch rise. This portable ramp provides access for curbs, steps, and thresholds that are 1.5 inches high. The ramp is 34 inches wide, making it ideal for all types of wheelchairs, scooters, walkers, and canes. The EZ-Access TRANSITIONS Modular Entry Ramp 1.5 inch free standing modular design portable ramp can be used either one by itself or 2 together, making it ideal for sliding glass door thresholds. The anodized aluminum ramp can be used indoors or out, and has a non-skid surface for traction and safety. This portable threshold ramp may be used either one by itself or combine 2 together to make an entry or exit convenient and safe. This lightweight aluminum portable ramp provides access for doorways, sliding glass doors and thresholds that are 1.5 inches high. The freestanding design makes it easy to install. Constructed of anodized aluminum that will not rust or corrode, this easy to install ramp and can be used indoors or out, and the non-skid surface provides traction for safety. This durable and safe access ramp smoothly bridges 1.5 inch high thresholds, doorways, and sliding door entry points. This ramp is easy to-install with the pre-drilled holes for permanent attachment. This lightweight modular ramp allows wheelchairs, power chairs, walkers and mobility scooters convenient access to exit and entryways. The EZ-Access TRANSITIONS Modular Entry Ramp 1.5 inch provides users safe access over thresholds that are 1.5 inches high. The EZ-Access TRANSITIONS Modular Entry Ramp is available in 1, 1-1/2, 2, 3, 4, 5, and 6 inch heights. EZ-Access TRANSITIONS Modular Entry Ramp Instructions EZ-Access TRANSITIONS Modular Entry Ramp Specifications EZ-Access TRANSITIONS Brochure EZ-Access TRANSITIONS Modular Entry Ramp 1.5 inch Specifications: Rise: 1.5 inches. Length: 9-1/2 inches. Material: Aluminum. Usable size: 1.5 inches high, 9-1/2 inches long, 34 inches wide. Weight: 5 pounds. Weight capacity: 700 lbs.
  • Price: $51.99
  • EZ-Access TRANSITIONS 1.5 inch Angled Entry Mats
  • Description: The EZ-Access TRANSITIONS 1.5 inch Angled Entry Mats are beveled edge threshold ramps made with 100% recycled rubber for excellent traction. These angled rubber ramps provide a smooth surface users with arthritis will find easy to walk on. The EZ-Access TRANSITIONS 1.5 inch Angled Entry Mats are strong and durable, making them ideal for use indoors or out. These ADA approved portable rubber ramps allow access to doorways and raised landings, and may be moved when necessary. These angled rubber ramps feature a gradual incline and create a smooth transition surface. Rubber threshold ramps are especially practical for sliding glass doors because they will not interfere with the door tracks. The anti-slip rubber bottom holds the ramp in place, and does not require installation with screws. Customize these ramps to fit a doorway simply by trimming the width edges. To trim for a smaller height, simply cut the ramp using the grooves on the bottom. The usable width is 36 inches with a maximum height of 1-1/2 inches. The gradual incline and smooth transition surface are helpful for people with arthritis. The EZ-Access TRANSITIONS 1.5 inch Angled Entry Mat provide users with arthritis an easy to walk on surface. EZ-Access TRANSITIONS Angled Entry Mat Instructions EZ-Access TRANSITIONS Angled Entry Mat Specifications EZ-Access TRANSITIONS Brochure EZ-Access TRANSITIONS 1.5 inch Angled Entry Mat Specifications: Material: 100% rubber. Usable Width: 36 inches. Dimensions: 1.5 inches high, 14 inches long, 40 inches wide. Product weighs: 14 lbs. Weight capacity: 850 lbs. Made in: USA.
  • Price: $109.95
  • EZ-Access TRANSITIONS 2.5 inch Angled Entry Mats
  • Description: The EZ-Access TRANSITIONS 2.5 inch Angled Entry Mats are strong and durable, making them ideal for use indoors or out. These ADA approved portable rubber ramps allow access to doorways and raised landings. People with arthritis will find these angled ramps are easy to walk on. The EZ-Access TRANSITIONS 2.5 inch Angled Entry Mats are made with 100% recycled rubber for excellent traction. These portable rubber ramps allow access to doorways and raised landings, and may be moved when necessary. These angled rubber ramps feature a gradual incline that provides a smooth transition surface. Unlike most threshold ramps that are held in place by screws and require drilling, this solid rubber ramp simply sits against the door sill. The non-slip rubber bottom holds the ramp in place. This rubber threshold ramp is especially practical for sliding glass doors because it will not interfere with the door tracks. Customize these ramps to fit a doorway simply by trimming the width edges. To trim for a smaller height, simply cut the ramp using the grooves on the bottom. The usable width is 36 inches with a maximum height of 2.5 inches. EZ-Access TRANSITIONS 2.5 inch Angled Entry Mats beveled rubber threshold ramps provide users with arthritis safe access at home. EZ-Access TRANSITIONS Angled Entry Mat Instructions EZ-Access TRANSITIONS Angled Entry Mat Specifications EZ-Access TRANSITIONS Brochure EZ-Access TRANSITIONS 2.5 inch Angled Entry Mats Specifications: Material: 100% rubber from recycled tires. Usable Width: 36 inches. Dimensions: 2.5 inches high, 25 inches long, 43 inches wide. Product weighs: 40 lbs. Weight capacity: 850 lbs. Made in: USA.
  • Price: $157.99
  • EZ-Access Modular Transitions Entry Mats Set of 4
  • Description: The EZ-Access Modular Transitions Entry Mats Set of 4 includes 2 of the EZ Access 2.5 inch Beveled Rubber Threshold Ramps, and the pair of EZ Access Transitions Modular Risers. Users with arthritis will find these slip-resistant portable rubber ramps provide a smooth transition and are ADA approved. The EZ-Access Modular Transitions Entry Mats Set of 4 rubber entry mats are designed for large doorways. Each mat measures 48 inches wide and 24 inches long, and can be easily trimmed for lower threshold heights and widths. These 2.5 inch high entry mats are combined with the Transitions Modular Rubber Risers to create a ramp with maximum height of 4 inches. These easy to install wedge mats are especially practical for sliding glass doors since they will not interfere with the door track. Customizable modular ramps made of 100% recycled tires, these durable ramps will withstand years of continued use and are ideal for indoor and outdoor use. They can be easily moved to another door or location if desired. Combine these modular entry mats with additional risers for thresholds with wider doors and entryways. The EZ-Access Modular Transitions Entry Mats Set of 4 provide safe access for users with arthritis. EZ-Access Modular Transitions Entry Mats Set of 4 Instructions EZ-Access Modular Transitions Entry Mats Set of 4 Specifications EZ-Access Modular Transitions Entry Mats Set of 4 Specifications: Includes: 2 of the EZ-Access 2.5 inch Beveled Rubber Threshold Ramps, and the pair of EZ-Access Transitions Modular Risers. Materials: Recycled rubber. Dimensions: 2.5 inches high, 24 inches long, 48 inches wide. Each Mat Weighs: 40 lbs. Weight capacity: 850 lbs. Made in: USA.
  • Price: $559.95
  • EZ-Access TRANSITIONS Modular Entry Mats Set of 2
  • Description: The EZ-Access TRANSITIONS Modular Entry Mats Set of 2 are slip-resistant rubber risers. These 2.5 inch high portable risers can be used with the EZ-Access TRANSTIONS Modular Entry Ramps. Stack them together to increase the height of the ramps for a smooth transition for wheelchair access. EZ-Access TRANSITIONS Modular Entry Mats Set of 2 includes two square rubber mat. Each rubber riser measures 24 inches wide, 24 inches deep, and 2.25 inches high. Transitions Risers are made of 100% recycled tires and can be trimmed to fit the height or width needed. Customizable modular risers and mats can be used indoors and outdoors and are ideal for wide sliding glass door entries. Users with arthritis will find the EZ-Access TRANSITIONS Modular Entry Mats Set of 2 provides easy access to a variety of door thresholds. EZ-Access TRANSITIONS Modular Entry Mat Instructions EZ-Access TRANSITIONS Modular Entry Mat Specifications EZ-Access TRANSITIONS Brochure EZ-Access TRANSITIONS Modular Entry Mats Set of 2 Specifications: Weight Capacity: 850 lbs. Usable Size for each riser: 24 inches wide, 24 inches long, 2.25 inches high. Material: Recycled rubber. Weight: 23.5 pounds per riser. Made in: USA.
  • Price: $139.95
  • EZ-Access SUITCASE 10 foot Trifold Advantage Ramp
  • Description: The EZ-Access SUITCASE 10 foot Trifold Advantage Ramp can be placed over 2 to 4 steps, providing a gentle incline that is easier for users with arthritis to walk on. The ramp also features a non-skid surface with a raised edge, which improves safety and helps reduce the risk of falls. The EZ-Access SUITCASE 10 foot Trifold Advantage Ramp provides the ideal length for wheelchair and scooter users to easily access steps, vehicles, and raised landings. This durable ramp was designed to be separated quickly into two individual sections for easy transportation. By removing two hinge pins, the ramp easily separates into two lightweight halves, each with their own carrying handle. The self-adjusting bottom transition plate allows smooth transfers from ramp to ground. This welded, aluminum ramp also has an applied, high-quality skid-resistant surface. The EZ-Access SUITCASE 10 foot Trifold Advantage Ramp is made in the USA. The area of the unfolded platform is 29 inches wide. The ramp can also support up to 800 pounds of weight and comes with a 3-year limited warranty. Persons with arthritis will benefit greatly from adding an the EZ-Access SUITCASE 10 foot Trifold Advantage Ramp to indoor or outdoor areas for easy access. EZ-Access SUITCASE Trifold Advantage Series Ramp Instructions EZ-Access SUITCASE Trifold Advantage Series Ramp Specifications EZ-Access SUITCASE Ramp Brochure EZ-Access SUITCASE 10 foot Trifold Advantage Ramp Specifications: Made of: Aluminum. Usable size: 10 feet long, 29.5 inches wide. Folded size: 60.75 inches long, 15 inches wide, 11.5 inches high. Weight per section: 30 lbs. Weight capacity: 800 lbs. Usage guidelines: 2 to 4 steps, some minivans, and SUV's. Manufactured in: USA.
  • Price: $544.99
  • EZ-Access SUITCASE 5 foot Trifold Advantage Ramp
  • Description: The EZ-Access SUITCASE 5 foot Trifold Advantage Ramp is a portable folding ramp that provides the ideal length for wheelchairs and scooters to easily access steps, vehicles, and raised landings. Persons with arthritis who need extra assistance going up and down steps will benefit greatly from this portable ramp. The EZ-Access SUITCASE 5 foot Trifold Advantage Ramp can be placed over steps, providing an easier transition for persons with arthritis. This handy folding ramp was designed to be quickly separated into two individual sections. By removing two hinge pins, the ramp easily separates into two lightweight halves, each with their own carrying handle. The EZ-Access SUITCASE 5 foot Trifold Advantage Ramp is made in the USA! The area of the unfolded platform is 29 inches wide. The ramp can also support up to 800 pounds of weight and comes with a 3-year limited warranty. EZ-Access SUITCASE Trifold Advantage Series Ramp Instructions EZ-Access SUITCASE Trifold Advantage Series Ramp Specifications EZ-Access SUITCASE Ramp Brochure EZ-Access SUITCASE 5 foot Trifold Advantage Ramp Specifications: Made of: Aluminum. Usable size: 5 feet long, 29.5 inches wide. Folded size: 30.75 inches long, 15 inches wide, 11.5 inches high. Weight per section: 16 lbs. Weight capacity: 800 lbs. Usage guidelines: Curbs, 1 to 2 steps, and some minivans. Made in: USA.
  • Price: $250.99
  • EZ-Access SUITCASE 6 foot Trifold Advantage Ramp
  • Description: The EZ-Access SUITCASE 6 foot Trifold Advantage Ramp provides the ideal length for wheelchair and scooter users to easily access steps, vehicles, and raised landings. Persons with arthritis using a mobility aid will find this ramp allows easy access for increased independence. ,br> The EZ-Access SUITCASE 6 foot Trifold Advantage Ramp can be placed over 1 to 3 steps, providing an easier transition for persons with arthritis. The 6 foot folding ramp was designed to be separated quickly into two individual sections for easy transportation. By removing two hinge pins, the ramp easily separates into two lightweight halves, each with their own carrying handle. The ramp can be placed over 1 to 3 steps, providing a gentle incline that is easier for persons with arthritis to walk on. The ramp also features a non-skid surface, which helps reduce the risk of falls. The EZ-Access SUITCASE 6 foot Trifold Advantage Ramp is made in the USA! The area of the unfolded platform is 29 inches wide. The ramp can also support up to 800 pounds of weight and comes with a 3-year limited warranty. EZ-Access SUITCASE Trifold Advantage Series Ramp Instructions EZ-Access SUITCASE Trifold Advantage Series Ramp Specifications EZ-Access SUITCASE Ramp Brochure EZ-Access SUITCASE 6 foot Trifold Advantage Ramp Specifications: Made of: Aluminum. Usable size: 6 feet long, 29.5 inches wide. Folded size: 36.75 inches long, 15 inches wide, 11.5 inches high. Weight per section: 19 lbs. Weight capacity: 800 lbs. Usage guidelines: 1 to 3 steps, some minivans, and SUV's. Manufactured in: USA.
  • Price: $282.99
  • EZ-Access SUITCASE 7 foot Trifold Advantage Ramp
  • Description: The EZ-Access SUITCASE 7 foot Trifold Advantage Ramp was designed to be separated quickly into two individual sections for easy transportation. By removing two hinge pins, the ramp easily separates into two lightweight halves, each with their own carrying handle. Persons with arthritis will benefit greatly from adding an EZ-Access SUITCASE 7 foot Trifold Advantage Ramp into their outdoor or indoor area. The ramp can be placed over 1 to 3 steps, providing a gentle incline that is easier for persons with arthritis to walk on. The ramp also features a non-skid surface, which helps reduce the risk of falls. The EZ-Access SUITCASE 7 foot Trifold Advantage Ramp provides the ideal length for wheelchair and scooter users to easily access steps, vehicles, and raised landings. The EZ-Access SUITCASE 7 foot Trifold Advantage Ramp is made in the USA. The area of the unfolded platform is 29 inches wide. The ramp can also support up to 800 pounds of weight and comes with a 3-year limited warranty. EZ-Access SUITCASE Trifold Advantage Series Ramp Instructions EZ-Access SUITCASE Trifold Advantage Series Ramp Specifications EZ-Access SUITCASE Ramp Brochure EZ-Access SUITCASE 7 foot Trifold Advantage Ramp Specifications: Made of: Aluminum. Usable size: 7 feet long, 29.5 inches wide. Folded size: 42.75 inches long, 15 inches wide, 11.5 inches high. Weight per section: 22 lbs. Weight capacity: 800 lbs. Usage guidelines: 1 to 3 steps, some minivans, and SUV's. Manufactured in: USA.
  • Price: $313.99
  • EZ-Access SUITCASE 8 foot Trifold Advantage Ramp
  • Description: The EZ-Access SUITCASE 8 foot Trifold Advantage Ramp was designed to be separated quickly into two individual sections for easy transportation. By removing two hinge pins, the ramp easily separates into two lightweight halves, each with their own carrying handle. Persons with arthritis will benefit greatly from adding an EZ-Access SUITCASE 8 foot Trifold Advantage Ramp into their outdoor or indoor area. The ramp can be placed over 2 to 3 steps, providing a gentle incline that is easier for persons with arthritis to walk on. The ramp also features a non-skid surface with a raised edge, which improves safety and helps reduce the risk of falls. The self-adjusting bottom transition plate allows smooth transfers from ramp to ground. This welded, aluminum ramp also has an applied, high-quality skid-resistant surface. The EZ-Access SUITCASE 8 foot Trifold Advantage Ramp provides the ideal length for wheelchair and scooter users to easily access steps, vehicles, and raised landings. The EZ-Access SUITCASE 8 foot Trifold Advantage Ramp is made in the USA. The area of the unfolded platform is 29 inches wide. The ramp can also support up to 800 pounds of weight and comes with a 3-year limited warranty. EZ-Access SUITCASE Trifold Advantage Series Ramp Instructions EZ-Access SUITCASE Trifold Advantage Series Ramp Specifications EZ-Access SUITCASE Ramp Brochure EZ-Access SUITCASE 8 foot Trifold Advantage Ramp Specifications: Made of: Aluminum. Usable size: 8 feet long, 29.5 inches wide. Folded size: 48.75 inches long, 15 inches wide, 11.5 inches high. Weight per section: 25 lbs. Weight capacity: 800 lbs. Usage guidelines: 2 to 3 steps, some minivans, and SUV's. Manufactured in: USA.
  • Price: $397.99
  • EZ-Access 12 inch TRANSITIONS Angled Entry Ramp
  • Description: The EZ-Access 12 inch TRANSITIONS Angled Entry Ramp is a ramp that is ideal for entries with uneven threshold surfaces. The portable, free-standing ramp has independently adjustable legs and swivel feet. The EZ-Access 12 inch TRANSITIONS Angled Entry Ramp is made of high-strength aluminum and has an extruded tread surface that provides a non-slip surface for wheelchairs, walkers, and scooters. The legs adjust from 1-15/16 to 2-3/4 inches in height. This ramp is ideal for doorways that swing in and out, uneven surfaces, or single step rises. EZ-Access TRANSITIONS Angled Entry Ramp Instructions EZ-Access TRANSITIONS Angled Entry Ramp Specifications EZ-Access TRANSITIONS Brochure EZ-Access 12 inch TRANSITIONS Angled Entry Ramp Specifications: Materials: Aluminum, slip-resistant surface. Usable size: 12 inches long, 36 inches wide, 1-3/8 inch high. Item weight: 5.15 lbs. Weight capacity: 700 lbs. Height adjusts: 1-15/16 to 2-3/4 inches. Model: TAER 12. Made in: USA.
  • Price: $77.99
  • EZ-Access 24 inch TRANSITIONS Angled Entry Ramp
  • Description: The EZ-Access 24 inch TRANSITIONS Angled Entry Ramp has swivel feet with pivoting foot pads that make this ramp adjustable. The portable ramp can accommodate varying heights and surface levels; therefore, it is ideal for entries with uneven and angled threshold surfaces. The EZ-Access 24 inch TRANSITIONS Angled Entry Ramp includes two sizes of swivel feet. The 1-1/2 inch swivel feet adjust from 2-1/8 to 3-3/8 inches, and the 2-1/2 inch swivel feet adjust from 3-3/16 to 4-3/8 inches. The high-strength, aluminum ramp has an extruded tread surface and is ideal for unlevel surfaces, single step rises, and doorways that swing in and out. The ramp provides a safe, non-slip surface for wheelchair, walker, or scooter users. EZ-Access TRANSITIONS Angled Entry Ramp Instructions EZ-Access TRANSITIONS Angled Entry Ramp Specifications EZ-Access TRANSITIONS Brochure EZ-Access 24 inch TRANSITIONS Angled Entry Ramp Specifications: Materials: Aluminum, slip-resistant surface. Usable size: 24 inches long, 36 inches wide, 1-11/16 inch high. Item weight: 10.4 lbs. Weight capacity: 700 lbs. Height adjusts: 2-1/8 to 3-3/8 inches, 3-3/16 to 4-3/8 inches. Model: TAER 24. Made in: USA.
  • Price: $121.99
  • EZ-Access 36 inch TRANSITIONS Angled Entry Ramp
  • Description: The EZ-Access 36 inch TRANSITIONS Angled Entry Ramp is a free-standing ramp designed for surfaces that are unlevel, angled, or varying heights. The ramp features independently adjustable legs and swivel feet with pivoting foot pads perfect for surfaces that aren't level. The EZ-Access 36 inch TRANSITIONS Angled Entry Ramp is easy to install, portable, and non-slip, which makes it ideal for doorways that swing in and out, unlevel surfaces, or single step rises. People with arthritis who use a wheelchair, walker, or scooter will find that the high-strength aluminum ramp with an extruded tread surface makes entries and exits safer. The ramp comes with 2-1/2 inch swivel feet that adjust the ramp height from 3-5/8 to 5-7/8 inches; however, the ramp can be used with or without the swivel feet. EZ-Access TRANSITIONS Angled Entry Ramp Instructions EZ-Access TRANSITIONS Angled Entry Ramp Specifications EZ-Access TRANSITIONS Brochure EZ-Access TRANSITIONS Angled Entry 36 inch Ramp Specifications: Materials: Aluminum, slip-resistant surface. Usable size: 36 inches long, 36 inches wide, 3-1/2 inch high. Item weight: 15.5 lbs. Weight capacity: 700 lbs. Height adjusts: 3-5/8 to 5-7/8 inches. Model: TAER 36. Made in: USA.
  • Price: $166.99
  • EZ-Access 10 Inch TRANSITIONS Angled Entry Plate
  • Description: The EZ Access 10 Inch TRANSITIONS Angled Entry Plate is a portable threshold ramp with applied tread that makes crossing thresholds in a wheelchair easier for users with arthritis. The slip-resistant surface of this easy to install ramp makes it safe and easy to use. The 10 Inch TRANSITIONS Angled Entry Plate resists rust and corrosion. The single-piece, formed aluminum plate increases traction in various conditions and helps eliminate trip hazards. The ramp accommodates most mobility devices. EZ-Access TRANSITIONS Angled Entry Plate Instructions EZ Access TRANSITIONS Angled Entry Plate Specifications EZ-Access TRANSITIONS Brochure Buy 3 or more and Save $$. Click on Quantity Discount Pricing Above. EZ-Access TRANSITIONS Angled Entry Plate 10 inch Specifications: Overall dimensions: 10 inches long, 32 inches wide, 0.695 inch high. Usable height: Up to 1-5/8 inch. Capacity: 700 lbs. Item weight: 4.25 lbs. Material: High-strength aluminum. Choose: Single ramp or Package of 3.
  • Price: $56.99
  • EZ-Access 8 inch TRANSITIONS Angled Entry Plate
  • Description: The EZ-Access 8 inch TRANSITIONS Angled Entry Plate is a slip-resistant, portable entry ramp. The solid, stand alone ramp is easy to install and helps people with arthritis who use mobility devices cross thresholds up to 1-5/16 inches high. The TRANSITIONS Angled Entry Plate accommodates most mobility devices, helps eliminate trip hazards, and will not rust or corrode. The non-slip surface with applied tread helps prevent falls, even when wet. The high-strength aluminum plate is 8 inches long, 32 inches wide, and has a weight capacity of 700 pounds. The EZ-Access 8 inch TRANSITIONS Angled Entry Plate helps users with arthritis using a mobility device cross thresholds easily. EZ-Access TRANSITIONS Angled Entry Plate Instructions EZ Access TRANSITIONS Angled Entry Plate Specifications EZ-Access TRANSITIONS Brochure Buy 3 or more and Save $$. Click on Quantity Discount Pricing Above. EZ-Access 8 inch TRANSITIONS Angled Entry Plate Specifications: Overall dimensions: 8 inches long, 32 inches wide, 0.695 inch high. Usable height: Up to 1-5/16 inches. Capacity: 700 lbs. Item weight: 3.5 lbs. Material: High-strength aluminum. Choose: Single ramp or Package of 3.
  • Price: $51.99
  • EZ-Access 12 inch TRANSITIONS Angled Entry Plate
  • Description: The EZ-Access 12 inch TRANSITIONS Angled Entry Plate is a slip-resistant threshold plate that is portable and easy to install. The threshold plate makes it easier for people with arthritis to cross thresholds up to 2 inches high in a mobility device. The 12 inch TRANSITIONS Angled Entry Plate has applied tread that makes it an ideal threshold plate in varying conditions. The aluminum plate will not rust or corrode and accommodates most mobility devices. The plate makes crossing thresholds safer and eliminates trip hazards. EZ-Access TRANSITIONS Angled Entry Plate Instructions EZ Access TRANSITIONS Angled Entry Plate Specifications EZ-Access TRANSITIONS Brochure Buy 3 or more and Save $$. Click on Quantity Discount Pricing Above. EZ-Access 12 inch TRANSITIONS Angled Entry Plate Specifications: Overall dimensions: 12 inches long, 32 inches wide, 0.695 inch high. Usable height: Up to 2 inches. Capacity: 700 lbs. Item weight: 5 lbs. Material: High-strength aluminum. Choose: Single ramp or Package of 3.
  • Price: $59.99
  • EZ Access TRANSITIONS Angled Entry 12 inch Ramp
  • Description: The EZ Access TRANSITIONS Angled Entry 12 inch Ramp is a free-standing ramp with independently adjustable legs and swivel feet. This portable ramp is ideal for entries with uneven threshold surfaces. The TRANSITIONS Angled 12 inch Ramp is ideal for doorways that swing in and out, uneven surfaces or single step rises. The adjustable legs allow for vertical adjustments ranging from 1-15/16 to 2-3/4 inches in height. Made completely out of high-strength aluminum with an extruded tread surface, the ramp provides wheelchair, walker and scooter users a non-slip surface for safe entry and exit. EZ Access TRANSITIONS Angled Entry is available in 12, 24 or 36 inch lengths. EZ Access TRANSITIONS Angled Entry Ramp Instructions EZ Access TRANSITIONS Angled Entry Ramp Specifications EZ Access TRANSITIONS Brochure EZ Access TRANSITIONS Angled Entry 12 inch Ramp Specifications: Materials: Aluminum, slip-resistant surface. Usable size: 12 inches long, 36 inches wide, 1-3/8 inch high. Item weight: 5.15 lbs. Weight capacity: 700 lbs. Height adjusts: 1-15/16 to 2-3/4 inches. Model: TAER 12. Made in: USA.
  • Price: $79.99
  • EZ Access TRANSITIONS Angled Entry 24 inch Ramp
  • Description: The EZ Access TRANSITIONS Angled Entry 24 inch Ramp is an adjustable ramp with swivel feet and pivoting foot pads to accommodate varying heights, angles, and surface levels. This free-standing ramp portable ramp with independently adjustable legs is ideal for entries with threshold surfaces that are uneven or angled. The TRANSITIONS Angled 24 inch Ramp includes two sizes of swivel feet. The 1-1-2 inch swivel feet adjust from 2-1/8 to 3-3/8 inches, and the 2-1/2 inch swivel feet adjust from 3-3/16 to 4-3/8 inches. The easy to install, non-slip portable ramp is ideal for doorways that swing in and out, unlevel surfaces or single step rises. Made completely out of high-strength aluminum with an extruded tread surface, the ramp provides people with disabilities using a wheelchair, walker or scooter a non-slip surface for safe entry and exit. The EZ Access TRANSITIONS Angled Entry 24 inch Ramp has a weight limit of 700 pounds and is made in USA. EZ Access TRANSITIONS Angled Entry Ramp Instructions EZ Access TRANSITIONS Angled Entry Ramp Specifications EZ Access TRANSITIONS Brochure EZ Access TRANSITIONS Angled Entry 24 inch Ramp Specifications: Materials: Aluminum, slip-resistant surface. Usable size: 24 inches long, 36 inches wide, 1-11/16 inch high. Item weight: 10.4 lbs. Weight capacity: 700 lbs. Height adjusts: 2-1/8 to 3-3/8 inches, 3-3/16 to 4-3/8 inches. Model: TAER 24. Made in: USA.
  • Price: $122.99
  • EZ Access TRANSITIONS Angled Entry 36 inch Ramp
  • Description: The EZ Access TRANSITIONS Angled Entry 36 inch Ramp is designed for surface levels that are not level. This free-standing ramp with independently adjustable legs and swivel feet with pivoting foot pads accommodates entries with threshold surfaces that are angled, varying heights or not level. The TRANSITIONS Angled 36 inch Ramp includes 2-1/2 inch swivel feet that adjust the height of the ramp from 3-5/8 to 5-7/8 inches. The aluminum, self supporting ramp can be used with or without the supplied adjustable swivel feet. The easy to install, non-slip portable ramp is ideal for doorways that swing in and out, unlevel surfaces or single step rises. Made completely out of high-strength aluminum with an extruded tread surface, the ramp provides people with disabilities using a wheelchair, walker or scooter a smooth and safe entry and exit. The EZ Access TRANSITIONS Angled Entry 36 inch Ramp has a weight limit of 700 pounds and is made in USA. EZ Access TRANSITIONS Angled Entry Ramp Instructions EZ Access TRANSITIONS Angled Entry Ramp Specifications EZ Access TRANSITIONS Brochure EZ Access TRANSITIONS Angled Entry 36 inch Ramp Specifications: Materials: Aluminum, slip-resistant surface. Usable size: 36 inches long, 36 inches wide, 3-1/2 inch high. Item weight: 15.5 lbs. Weight capacity: 700 lbs. Height adjusts: 3-5/8 to 5-7/8 inches. Model: TAER 36. Made in: USA.
  • Price: $167.95
  • Diestco EZ Edge Portable Ramps
  • Description: The Diestco EZ Edge Portable Ramps are ADA approved portable threshold ramps for residential and commercial use. These durable, slip resistant rubber ramps are available in 3 sizes. The Diestco EZ Edge Portable Ramps are extremely durable rubber ramps that are easy to install, modify, and use. The sloped sides provide a smooth transition from any angle for users to easily enter doorways and entryways. All EZ Edge threshold ramps have a 1:12 slope ratio at any height, and are designed to meet specific ADA requirements for safety. EZ Edge Small Ramp measures 7/8 inch high, 6 inches wide, 42 inches long. EZ Edge Medium Ramp measures 1-1/4 inches high, 12 inches wide, 42 inches long. EZ Edge Large Ramp measures 2-3/16 inches high, 24 inches wide, 60 inches long. Durable, slip resistant, rubber Diestco EZ Edge Portable Ramps provide an easy to install and modify transitional surface for users with limited mobility. Diestco EZ Edge Portable Ramps Specifications: Choose size: Small, Medium, or Large. Small ramp 7/8 inch high, 6 inches wide, 42 inches long, weighs 7.5 lbs. Medium ramp: 1-1/4 inches high, 12 inches wide, 42 inches long, weighs 14 lbs. Large ramp: 2-3/16 inches high, 24 inches wide, 60 inches long, weighs 52 lbs. Material: Solid rubber ramp. Color: Black. Made in: USA.
  • Price: $105.95
  • Duro Med Telescoping 5 Foot Wheelchair Ramps
  • Description: The Duro Med Telescoping 5 Foot Wheelchair Ramps are wheelchair ramps that adjust to give users easy access to rooms or homes that have steps. The portable ramps make it easier for wheelchair users to visit friends or family homes that would not otherwise be accessible. The Telescoping Adjustable Wheelchair Ramps are easy to travel with and store since they are so compact and light. They are 60 inches long and 7 inches wide, and each ramp weighs 6 lbs and can support 330 lbs. The ramps extend from 3 to 5 feet, which makes it possible for them to be used on different step sizes and heights. The ramps adjust easily: just pull sections 1 and 2 until the locking buttons fully extend into the holes and snap into place. Simply retract them after use and put them away in the convenient nylon carrying bag. The ramps have an inner track area of 4 inches and will work for rises up to 10 inches. Duro-Med Telescoping Adjustable Wheelchair Ramps 5 Foot Specifications: Width: 7 inches wide overall, 4 inches inside tracks. Overall Ramp Length: 3 feet minimum, 5 feet maximum. Overall Product Weight: Each ramp weighs 6 lbs. Weight limit: Each ramp can support 330 lbs.
  • Price: $209.95
  • EZAccess TRANSITIONS Modular Entry Ramp 1 inch
  • Description: The EZAccess TRANSITIONS Modular Entry Ramp 1 inch enables users of scooters and wheelchairs safe entry and exit through standard or sliding doors with a 1 inch threshold. Caregivers will find this 34 inch wide, rust-proof aluminum ramp has a non-skid surface for added safety. EZAccess TRANSITIONS Modular Entry Ramp 1 inch aluminum ramp provides a safe transition over raised thresholds making pushing a wheelchair through doorways easier for the caregiver. For sliding glass or extra-wide doors, two ramps can be placed side-by-side. Lightweight yet durable ramp can be used indoors or outdoors and accommodates up to 700 lbs. Free standing design includes pre-drilled holes in the foot section an adjustable flap for anchoring. The hardware needed to permanently mount the ramp is included. EZAccess TRANSITIONS Modular Entry Ramp 1 inch EZ Access modular design allows the ramp to be customized by easily adding or removing interchangeable extensions as needed to accommodate the threshold. TRANSITIONS Modular Entry Ramp is available in 1, 1-1/2, 2, 3, 4, 5, and 6 inch heights. EZAccess TRANSITIONS Modular Entry Ramp Instructions EZAccess TRANSITIONS Modular Entry Ramp Specifications EZAccess TRANSITIONS Brochure EZAccess TRANSITIONS Modular Entry Ramp 1 inch Specifications: Height: 1 inches. Length: 6-1/2 inches. Material: Aluminum. Threshold Range: 3/4 to 1-1/4 inch rise. Made in: USA. Weight Capacity: 700 pounds.
  • Price: $36.99
  • EZAccess TRANSITIONS Modular Entry Ramp 2 inch
  • Description: The EZAccess TRANSITIONS Modular Entry Ramp provides safe transition over thresholds ranging in height from 1-3/4 to 2-1/4 inches. This 2 inch high aluminum ramp provides a safe transition over raised thresholds making pushing a wheelchair through doorways easier for the caregiver. EZAccess TRANSITIONS Modular Entry Ramp 2 inch is a 34 inch wide ramp that enables users of scooters and wheelchairs safe entry and exit through standard or sliding doors a raised threshold. The rust-proof aluminum ramp has a non-skid surface for added safety. For sliding glass or extra-wide doors, two ramps can be placed side-by-side. Lightweight yet durable ramp can be used indoors or outdoors and accommodates up to 700 lbs. Caregivers can push a wheelchair over a raised threshold easier with the EZAccess TRANSITIONS Modular Entry Ramp 2 inch aluminum ramp. The EZAccess TRANSITIONS Modular Entry Ramp is available in 1, 1-1/2, 2, 3, 4, 5, and 6 inch heights. EZAccess TRANSITIONS Modular Entry Ramp Instructions EZAccess TRANSITIONS Modular Entry Ramp Specifications EZAccess TRANSITIONS Brochure EZAccess TRANSITIONS Modular Entry Ramp Specifications: Height: 2 inches. Length: 12 inches. Material: Aluminum. Threshold Range: 1-3/4 to 2-1/4 inch rise. Made in: USA. Weight Capacity: 700 pounds.
  • Price: $68.99
  • EZAccess TRANSITIONS Modular Entry Ramp 3 inch
  • Description: The EZAccess TRANSITIONS Modular Entry Ramp 3 inch is a lightweight threshold ramp with a non-skid surface for added safety. This 34 inch wide ramp enables users of scooters and wheelchairs safe transition over thresholds ranging from 2-3/4 to 3-1/4 inches high. EZAccess TRANSITIONS Modular Entry Ramp 3 inch is a durable rust proof aluminum ramp that can be used indoors or outdoors and accommodates up to 700 lbs. This aluminum threshold ramp helps caregivers provide safe access for wheelchair, scooters, and other mobility aids. For sliding glass or extra-wide doors, two ramps can be placed side-by-side. The rust-proof aluminum ramp has a non-skid surface for added safety. EZAccess TRANSITIONS Modular Entry Ramp 3 inch provides caregivers an easy way to allow access for wheelchair users over a raised threshold. The EZAccess TRANSITIONS Modular Entry Ramp is available in 1, 1-1/2, 2, 3, 4, 5, and 6 inch heights. EZAccess TRANSITIONS Modular Entry Ramp Instructions EZAccess TRANSITIONS Modular Entry Ramp Specifications EZAccess TRANSITIONS Brochure EZAccess TRANSITIONS Modular Entry Ramp 3 inch Specifications: Height: 3 inches. Length: 17 inches. Material: Aluminum. Threshold Range: 2-3/4 to 3-1/4 inch rise. Made in: USA. Weight Capacity: 700 pounds.
  • Price: $82.99
  • EZAccess TRANSITIONS Modular Entry Ramp 4 inch
  • Description: The EZAccess TRANSITIONS Modular Entry Ramp 4 inch is a four inch high modular threshold ramp designed for doorways, sliding glass doors, and raised landings. This durable rust proof aluminum ramp with non-skid surface enables wheelchairs and scooters safe transition over thresholds ranging from 3-3/4 to 4-1/4 inches high. The EZAccess TRANSITIONS Modular Entry Ramp 4 inch is a rust-proof aluminum ramp with a non-skid surface for added safety. The anodized finish resists scratches and won't rust, leaving a clean, attractive appearance. This ramp is easy to-install with the pre-drilled holes for permanent installation if desired. The 34 inch wide ramp can be can be used indoors or outdoors and accommodates up to 700 lbs. The anodized finish resists scratches and won't rust, leaving a clean, attractive appearance. This ramp is easy to-install with the pre-drilled holes if you want to permanently attach the ramp. The EZAccess TRANSITIONS Modular Entry Ramp 4 inch aluminum threshold ramp provides caregivers safe access for wheelchair, scooters, and other mobility aids. The EZAccess TRANSITIONS Modular Entry Ramp is available in 1, 1-1/2, 2, 3, 4, 5, and 6 inch heights. EZAccess TRANSITIONS Modular Entry Ramp Instructions EZAccess TRANSITIONS Modular Entry Ramp Specifications EZAccess TRANSITIONS Brochure EZAccess TRANSITIONS Modular Entry Ramp 4 inch Specifications: Height: 4 inches. Length: 22-1/4 inches. Material: Aluminum. Threshold Range: 3-3/4 to 4-1/4 inch rise. Made in: USA. Weight Capacity: 700 pounds.
  • Price: $98.99
  • EZAccess TRANSITIONS Modular Entry Ramp 5 inch
  • Description: The EZAccess TRANSITIONS Modular Entry Ramp 5 inch is a 34 inch wide threshold ramp that provides safe access for wheelchairs, scooters, walkers, and other mobility aids. This five inch high modular ramp is designed for doorways, sliding glass doors, raised landings and other un-level surfaces. EZAccess TRANSITIONS Modular Entry Ramp 5 inch helps caregivers provide easy access for wheelchair users. The portable ramp with non-skid surface enables wheelchairs and scooters safe transition over thresholds ranging from 4-3/4 to 5-1/4 inches high. Durable rust proof aluminum ramp can be used indoors or outdoors and accommodates up to 700 lbs. EZAccess TRANSITIONS Modular Entry Ramp 5 inch lightweight modular ramp allows wheelchairs, power chairs, walkers and mobility scooters convenient access to exit and entryways. The EZAccess TRANSITIONS Modular Entry Ramp is available in 1, 1-1/2, 2, 3, 4, 5, and 6 inch heights. EZAccess TRANSITIONS Modular Entry Ramp Instructions EZAccess TRANSITIONS Modular Entry Ramp Specifications EZAccess TRANSITIONS Brochure EZAccess TRANSITIONS Modular Entry Ramp 5 inch Specifications: Height: 5 inches. Length: 27-1/2 inches. Material: Aluminum. Threshold Range: 4-3/4 to 5-1/4 inch rise. Made in: USA. Weight: 15 pounds.
  • Price: $122.99
  • EZAccess TRANSITIONS Modular Entry Ramp 6 inch
  • Description: The EZAccess TRANSITIONS Modular Entry Ramp 6 inch measures 34 inch wide and easily accommodates wheelchairs, scooters, walkers, and other mobility aids. The six inch high modular ramp is 32-3/4 inches long, providing an ideal rise that makes it easy for caregivers to push wheelchairs. EZAccess TRANSITIONS Modular Entry Ramp 6 inch threshold ramp is designed for doorways, sliding glass doors, raised landings and other un-level surfaces. The portable ramp with non-skid surface enables safe transition over thresholds ranging from 5-3/4 to 6-1/4 inches high. Durable rust proof aluminum ramp can be used indoors or outdoors and accommodates up to 700 lbs. This modular aluminum ramp allows for a smooth ground-to-sill transition over doorway thresholds. EZAccess TRANSITIONS Modular Entry Ramp 6 inch helps caregivers reduce preventable trip hazards and makes home more comfortable and safe for mobility users. The EZAccess TRANSITIONS Modular Entry Ramp is available in 1, 1-1/2, 2, 3, 4, 5, and 6 inch heights. EZAccess TRANSITIONS Modular Entry Ramp Instructions EZAccess TRANSITIONS Modular Entry Ramp Specifications EZAccess TRANSITIONS Brochure EZAccess TRANSITIONS Modular Entry Ramp 6 inch Specifications: Height: 6 inches. Length: 32-3/4 inches. Material: Aluminum. Threshold Range: 5-3/4 to 6-1/4 inch rise. Made in: USA. Weight: 20 pounds.
  • Price: $150.99
  • EZAccess TRANSITIONS Modular Entry Ramp 1.5 inch
  • Description: The EZAccess TRANSITIONS Modular Entry Ramp 1.5 inch is a 34 inch wide threshold ramp that is designed for doorways, sliding glass doors, raised landings. This threshold ramp provides safe access for wheelchairs, scooters, walkers, and other mobility aids. EZAccess TRANSITIONS Modular Entry Ramp 1.5 inch aluminum modular ramp with non-skid surface allows a smooth transition over thresholds ranging from 1-1/4 to 1-3/4 inches high. Installation is easy with the hidden hinge, and extensions can be easily added or removed. The pivoting flap attaches to the top of the ramp to provide 1/4 inch of additional adjustability. Durable rust proof aluminum ramp can be used indoors or outdoors and accommodates up to 700 lbs. EZAccess TRANSITIONS Modular Entry Ramp 1.5 inch is made of aluminum and features an extruded, slip-resistant surface for superior traction. The EZAccess TRANSITIONS Modular Entry Ramp is available in 1, 1-1/2, 2, 3, 4, 5, and 6 inch heights. EZAccess TRANSITIONS Modular Entry Ramp Instructions EZAccess TRANSITIONS Modular Entry Ramp Specifications EZAccess TRANSITIONS Brochure EZAccess TRANSITIONS Modular Entry Ramp 1.5 inch Specifications: Height: 1.5 inches. Length: 9-1/2 inches. Material: Aluminum. Threshold Range: 1-1/4 to 1-3/4 inch rise. Made in: USA. Weight: 5 pounds.
  • Price: $51.99
  • EZAccess TRANSITIONS 1-1/2 inch Angled Entry Mat
  • Description: The EZAccess TRANSITIONS 1-1/2 inch Angled Entry Mat is a rubber threshold ramp with beveled sides that is ADA approved. This anti-slip portable wheelchair ramp is ideal for indoor or outdoor use. Caregivers will find this angled ramp provides a safe and smooth transition through doorways and raised landings. The EZAccess TRANSITIONS 1-1/2 inch Angled Entry Mat is lightweight, requires no installation, and can be easily moved to another location or doorway. This portable rubber ramp can be customized to fit a variety of doorway sizes. Simply trim the width edges, or cut the ramp using the grooves on the bottom for lower height requirements. The ramp measures 1-1/2 inches high, is made from 100% recycled tires and provides a safe and smooth transition through doorways and raised landings. A rubber threshold ramp is especially practical for sliding glass doors because it will not interfere with the door tracks. Unlike most threshold ramps that are held in place by screws and require drilling, this solid rubber ramp simply sits against the door sill. The EZAccess TRANSITIONS 1-1/2 inch Angled Entry Mat rubber threshold ramp helps caregivers provide safe access at home. EZAccess TRANSITIONS Angled Entry Mat Instructions EZAccess TRANSITIONS Angled Entry Mat Specifications EZAccess TRANSITIONS Brochure The EZAccess TRANSITIONS 1-1/2 inch Angled Entry Mat Specifications: Material: 100% rubber from recycled tires. Usable Width: 36 inches. Overall Measures: 1-1/2 inches high, 14 inches long, 40 inches wide. Weight capacity: 850 lbs. Weighs: 14 lbs. Made in: USA.
  • Price: $109.99
  • EZAccess TRANSITIONS 2-1/2 inch Angled Entry Mat
  • Description: The EZAccess TRANSITIONS 2-1/2 inch Angled Entry Mat is an anti-slip portable wheelchair ramp that is 2-1/2 inches high. Caregivers will find this ADA approved rubber threshold ramp with beveled sides is ideal for indoor or outdoor use. The EZAccess TRANSITIONS 2-1/2 inch Angled Entry Mat is ideal for use with wheelchairs, scooters, walkers, canes. This portable rubber ramp can be customized to fit a variety of doorway sizes. Simply trim the width edges, or cut the ramp using the grooves on the bottom for lower height requirements. This angled rubber threshold mat is lightweight, requires no installation, and can be easily moved to another location or doorway, making it ideal to use indoors or outdoors. Made from 100% recycled rubber, the ramp features a gradual incline and provides a safe and smooth transition through doorways and raised landings making it easier for caregivers pushing a wheelchair. The EZAccess TRANSITIONS 2-1/2 inch Angled Entry Mat allows easy access for scooters, wheelchairs, walkers, other mobility aids. EZAccess TRANSITIONS Angled Entry Mat Instructions EZAccess TRANSITIONS Angled Entry Mat Specifications EZAccess TRANSITIONS Brochure EZAccess TRANSITIONS 2-1/2 inch Angled Entry Mat Specifications: Material: 100% rubber. Usable Width: 36 inches. Overall Measures: 2-1/2 inches high, 25 inches long, 43 inches wide. Weight capacity: 850 lbs. Weighs: 40 lbs. Made in: USA.
  • Price: $157.99
  • EZAccess TRANSITIONS Modular Mats Set
  • Description: The EZAccess TRANSITIONS Modular Mats Set are ADA approved and designed provide a smooth transition for wheelchair access. Caregivers will find these slip-resistant portable rubber ramps easy to install. The EZAccess TRANSITIONS Modular Mats Set includes 2 of the EZAccess TRANSITIONS 2.5 inch Beveled Rubber Threshold Ramps and 2 of the EZAccess TRANSITIONS Modular Risers. The 2.5 inch high ramps are combined with the modular rubber risers to create a ramp with maximum height of 4 inches. Each mat measures 48 inches wide and 24 inches long, and can be easily trimmed for lower threshold heights and widths. These easy to install wedge mats are especially practical for sliding glass doors since they will not interfere with the door track. These customizable modular ramps are made of 100% recycled tires and are extremely durable ramps to withstand years of continued use indoors and outdoors. When TRANSITIONS Modular Entry Ramps are combined with additional risers, they work perfectly for thresholds with wider doors and entryways. EZAccess TRANSITIONS Modular Mats Set Instructions EZAccess TRANSITIONS Modular Mats Set Specifications EZAccess TRANSITIONS Modular Mats Set Specifications: Includes: 2 of the EZAccess TRANSITIONS 2.5 inch Beveled Rubber Threshold Ramps, and the pair of EZAccess TRANSITIONS Modular Risers. Weight capacity: 850 lbs. Made of: Recycled rubber. Each Mat Measures: 2.5 inches high, 24 inches long, 48 inches wide. Each Mat Weighs: 40 lbs. Made in: USA.
  • Price: $559.95
  • EZAccess TRANSITIONS Modular Risers Set
  • Description: The EZAccess TRANSITIONS Modular Risers Set can be combined with the EZAccess Modular TRANSITIONS Mats to create a ramp with maximum height of 4.75 inches. These slip resistant risers provide a smooth surface for doorway entrances and are ADA approved. The EZAccess TRANSITIONS Modular Risers Set includes 2 square rubber mats. Caregivers will find these portable rubber risers can be customized for a variety of uses. Modular risers can be trimmed to fit the height or width needed for wheelchair access. Each large rubber riser measures 24 inches wide, 24 inches deep, and 2.25 inches high. TRANSITIONS Risers are made of 100% recycled tires and are ideal for indoor and outdoor use. EZAccess TRANSITIONS Modular Risers Instructions EZAccess TRANSITIONS Modular Risers Specifications EZAccess TRANSITIONS Modular Risers Set Specifications: Weight Capacity: 850 lbs. Usable Size of each riser: 24 inches wide, 24 inches long, 2.25 inches high. Material: Recycled rubber. Each riser weighs: 23.5 lbs. Made in: USA.
  • Price: $139.95
  • EZAccess SUITCASE Trifold Advantage 10 foot Ramp
  • Description: The EZAccess SUITCASE Trifold Advantage 10 foot Ramp was designed for Caregivers to quickly and easily separate the two individual sections for transportation. By removing two hinge pins, the ramp easily separates into two lightweight halves, each with their own carrying handle. Ramp features a self-adjusting bottom transition plate for easy maneuvering from ramp to ground, and an applied, high-quality skid-resistant surface. Caregivers who provide in home care will benefit greatly from implementing this foldable and portable ramp. The ramp can be placed over 2 to 4 steps, providing an easier rolling transition for caregivers to assist or push patients. The EZAccess SUITCASE Trifold Advantage 10 foot Ramp is a portable folding ramp that provides caregivers with the necessary length to easily assist or push wheelchair and scooter users over steps, into vehicles, and onto raised landings. The EZAccess SUITCASE Trifold Advantage 10 foot Ramp is made in the USA! The area of the unfolded platform is 29 inches wide. The ramp can also support up to 800 pounds of weight and comes with a 3-year limited warranty. EZAccess SUITCASE Trifold Advantage Series Ramp Instructions EZAccess SUITCASE Trifold Advantage Series Ramp Specifications EZAccess SUITCASE Ramp Brochure EZAccess SUITCASE Trifold Advantage 10 foot Ramp Specifications: Made of: Aluminum. Usable size: 10 feet long, 29-1/2 inches wide. Folded size: 60-3/4 inches long, 15 inches wide, 11-1/2 inches high. Weight per section: 30 lbs. Weight capacity: 800 lbs. Usage guidelines: 2 to 4 steps, some minivans, and SUV's. Manufactured in: USA!
  • Price: $544.99
  • EZAccess SUITCASE Trifold Advantage 5 foot Ramp
  • Description: The EZAccess SUITCASE Trifold Advantage 5 foot Ramp is a portable folding ramp that provides caregivers with the ideal length to push wheelchair and scooter users over steps, into vehicles, and onto raised landings. Persons who provide in home care will benefit greatly from this portable ramp. The ramp can be placed over 1-2 steps, providing an easier rolling transition for caregivers to assist or push patients. This handy EZAccess SUITCASE Trifold Advantage 5 foot Ramp was designed to be quickly separated into two individual sections. By removing two hinge pins, the ramp easily separates into two lightweight halves, each with their own carrying handle. The EZAccess SUITCASE Trifold Advantage 5 foot Ramp is made in the USA! The area of the unfolded platform is 29 inches wide. The ramp can also support up to 800 pounds of weight and comes with a 3-year limited warranty. EZAccess SUITCASE Trifold Advantage Series Ramp Instructions EZAccess SUITCASE Trifold Advantage Series Ramp Specifications EZAccess SUITCASE Ramp Brochure EZAccess SUITCASE Trifold Advantage 5 foot Ramp Specifications: Made of: Aluminum. Usable size: 5 feet long, 29-1/2 inches. Folded size: 30-3/4 inches long, 15 inches wide, 11-1/2 inches high. Weight per section: 16 lbs. Weight capacity: 800 lbs. Usage guidelines: Curbs, 1 to 2 steps, and some minivans. Made in: USA.
  • Price: $250.99
  • EZAccess SUITCASE Trifold Advantage 6 foot Ramp
  • Description: Caregivers who provide in home care will benefit greatly from implementing the EZAccess SUITCASE Trifold Advantage 6 foot Ramp . The ramp can be placed over 1-3 steps, providing an easier rolling transition for caregivers to assist or push patients. This ramp was designed to be quickly separated into two individual sections for easy transportation. By removing two hinge pins, the ramp easily separates into two lightweight halves, each with their own carrying handle. The EZAccess SUITCASE Trifold Advantage 6 foot Ramp is foldable and portable, and designed to provide caregivers with the ideal length ramp to easily push wheelchair and scooter users over steps, into vehicles, and onto raised landings. The EZAccess SUITCASE Trifold Advantage 6 foot Ramp is made in the USA! The area of the unfolded platform is 29 inches wide. The ramp can also support up to 800 pounds of weight and comes with a 3-year limited warranty. EZAccess SUITCASE Trifold Advantage Series Ramp Instructions EZAccess SUITCASE Trifold Advantage Series Ramp Specifications EZAccess SUITCASE Ramp Brochure EZAccess SUITCASE Trifold Advantage 6 foot Ramp Specifications: Made of: Aluminum. Usable size: 6 feet long, 29-1/2 inches wide. Folded size: 36-3/4 inches long, 15 inches wide, 11-1/2 inches high. Weight per section: 19 lbs. Weight capacity: 800 lbs. Usage guidelines: Curbs, 1 to 3 steps, and some minivans, and SUV's. Made in: USA.
  • Price: $282.99
  • EZAccess SUITCASE Trifold Advantage 7 foot Ramp
  • Description: The EZAccess SUITCASE Trifold Advantage 7 foot Ramp is a portable folding ramp that provides caregivers with the ideal length to easily push wheelchair and scooter users over steps, into vehicles, and onto raised landings. The EZAccess SUITCASE Trifold Advantage 7 foot Ramp was designed to be quickly separated into two individual sections for easy transportation. By removing two hinge pins, the ramp easily separates into two lightweight halves, each with their own carrying handle. Caregivers who provide in home care will benefit greatly from implementing this foldable and portable ramp. The ramp can be placed over 1-3 steps, providing an easier rolling transition for caregivers to assist or push patients. The EZAccess SUITCASE Trifold Advantage 7 foot Ramp is made in the USA! The area of the unfolded platform is 29 inches wide. The ramp can also support up to 800 pounds of weight and comes with a 3-year limited warranty. EZAccess SUITCASE Trifold Advantage Series Ramp Instructions EZAccess SUITCASE Trifold Advantage Series Ramp Specifications EZAccess SUITCASE Ramp Brochure EZAccess SUITCASE Trifold Advantage 7 foot Ramp Specifications: Made of: Aluminum. Usable size: 7 feet long, 29-1/2 inches wide. Folded size: 42-3/4 inches long, 15 inches wide, 11-1/2 inches high. Weight per section: 22 lbs. Weight capacity: 800 lbs. Usage guidelines: Curbs, 1 to 3 steps, and some minivans, and SUV's. Made in: USA.
  • Price: $313.99
  • EZAccess SUITCASE Trifold Advantage 8 foot Ramp
  • Description: The EZAccess SUITCASE Trifold Advantage 8 foot Ramp is a portable folding ramp that provides caregivers with the necessary length to easily assist or push wheelchair and scooter users over steps, into vehicles, and onto raised landings. This handy EZAccess SUITCASE Trifold Advantage 8 foot Ramp was designed for caregivers to quickly and easily separate the two individual sections for transportation. By removing two hinge pins, the ramp easily separates into two lightweight halves, each with their own carrying handle. Caregivers who provide in home care will benefit greatly from implementing this foldable and portable ramp. The ramp can be placed over 2 to 3 steps, providing an easier rolling transition for caregivers to assist or push patients. The EZAccess SUITCASE Trifold Advantage 8 foot Ramp is made in the USA! The area of the unfolded platform is 29 inches wide. The ramp can also support up to 800 pounds of weight and comes with a 3-year limited warranty. EZAccess SUITCASE Trifold Advantage Series Ramp Instructions EZAccess SUITCASE Trifold Advantage Series Ramp Specifications EZAccess SUITCASE Ramp Brochure EZAccess SUITCASE Trifold Advantage 8 foot Ramp Specifications: Made of: Aluminum. Usable size: 8 feet long, 29-1/2 inches wide. Folded size: 48-3/4 inches long, 15 inches wide, 11-1/2 inches high. Weight per section: 25 lbs. Weight capacity: 800 lbs. Usage guidelines: 2 to 3 steps, some minivans, and SUV's. Manufactured in: USA!
  • Price: $397.99
  • EZAccess TRANSITIONS Angled 12 inch Entry Ramp
  • Description: The EZAccess TRANSITIONS Angled 12 inch Entry Ramp is ideal for doorways that swing in and out, uneven surfaces or single step rises. Caregivers will find this free-standing, portable ramp provides safe entry for thresholds with uneven surfaces. The EZAccess TRANSITIONS Angled 12 inch Ramp has swivel feet and independently adjustable legs that allow for vertical adjustments ranging from 1-15/16 to 2-3/4 inches in height. The non-slip extruded surface provides wheelchairs, walkers and scooters safe safe access across uneven thresholds. The ramp is made completely out of high-strength aluminum. EZAccess TRANSITIONS Angled Entry Ramp is available in 12, 24 or 36 inch lengths. EZAccess TRANSITIONS Angled Entry Ramp Instructions EZAccess TRANSITIONS Angled Entry Ramp Specifications EZAccess TRANSITIONS Brochure EZAccess TRANSITIONS Angled 12 inch Entry Ramp Specifications: Materials: Aluminum, slip-resistant surface. Usable size: 12 inches long, 36 inches wide, 1-3/8 inch high. Item weight: 5.15 lbs. Weight capacity: 700 lbs. Made in: USA. Model: TAER12.
  • Price: $77.99
  • EZAccess TRANSITIONS Angled 24 inch Entry Ramp
  • Description: The EZAccess TRANSITIONS Angled 24 inch Entry Ramp is designed to provide a smooth transition over uneven surfaces. Caregivers will find this free-standing, portable ramp provides safe entry through doorways that swing in and out, uneven surfaces or single step rises. The EZAccess TRANSITIONS Angled 24 inch Ramp includes 1-1/2 inch and 2-1/2 inch swivel feet. The 1-1/2 inch swivel feet adjust from 2-1/8 to 3-3/8 inches, and the 2-1/2 inch swivel feet adjust from 3-3/16 to 4-3/8 inches. Wheelchair, walker and scooter users will find the non-slip extruded surface provides a safe surface across uneven thresholds. The ramp is made completely out of high-strength aluminum. The EZAccess TRANSITIONS Angled 24 inch Entry Ramp free-standing ramp portable ramp with independently adjustable legs helps caregivers provide easy access for entries with threshold surfaces that are uneven or angled. EZAccess TRANSITIONS Angled Entry Ramp is available in 12, 24 or 36 inch lengths. EZAccess TRANSITIONS Angled Entry Ramp Instructions EZAccess TRANSITIONS Angled Entry Ramp Specifications EZAccess TRANSITIONS Brochure EZAccess TRANSITIONS Angled 24 inch Entry Ramp Specifications: Materials: Aluminum, slip-resistant surface. Usable size: 24 inches long, 36 inches wide, 1-11/16 inch high. Height adjusts: 2-1/8 to 3-3/8 inches, 3-3/16 to 4-3/8 inches. Item weight: 10.4 lbs. Weight capacity: 700 lbs. Made in: USA. Model: TAER24.
  • Price: $121.99
  • EZAccess TRANSITIONS Angled 36 inch Entry Ramp
  • Description: The EZAccess TRANSITIONS Angled 36 inch Entry Ramp is designed for uneven surfaces. The free-standing ramp's independently adjustable legs and swivel feet with pivoting foot pads make it great for thresholds that are angled, uneven, or varying heights. The EZAccess TRANSITIONS Angled 36 inch Entry Ramp is an aluminum, rust-proof ramp that comes with 2-1/2 inch swivel feet that adjust the ramp height from 3-5/8 to 5-7/8 inches. The ramp can be used with or without the included feet. The portable, adjustable ramp is easy to install, non-slip, and ideal for doorways that swing in and out, single step rises, and other uneven surfaces. The ramp features an extruded tread surface that makes the ramp safer for people who use wheelchairs, walkers, and scooters. EZAccess TRANSITIONS Angled Entry Ramp is available in 12, 24 or 36 inch lengths. EZAccess TRANSITIONS Angled Entry Ramp Instructions EZAccess TRANSITIONS Angled Entry Ramp Specifications EZAccess TRANSITIONS Brochure EZAccess TRANSITIONS Angled Entry 36 inch Ramp Specifications: Materials: Aluminum, slip-resistant surface. Usable size: 36 inches long, 36 inches wide, 3-1/2 inch high. Item weight: 15.5 lbs. Weight capacity: 700 lbs. Height adjusts: 3-5/8 to 5-7/8 inches. Model: TAER 36. Made in: USA.
  • Price: $166.99
  • EZAccess TRANSITIONS Angled 10 Inch Plate
  • Description: The EZAccess TRANSITIONS Angled 10 Inch Plate is a slip-resistant threshold ramp that is portable and easy to install. This stand-alone ramp makes it easy for users with mobility devices to cross thresholds. The EZAccess TRANSITIONS Angled 10 Inch Plate provides safety and stability when crossing thresholds. The applied tread on this single-piece, formed aluminum plate increases traction which helps eliminate trip hazards and accommodates most mobility devices. This 32 inch wide, 700-pound weight capacity features an applied, slip-resistant surface for greater traction, even when wet. The EZAccess TRANSITIONS Angled 10 Inch Plate is made of formed aluminum construction for simple, one-step threshold navigation. The EZAccess TRANSITIONS Angled Plate is available in three lengths (8, 10, and 12 inches) to accommodate thresholds up to 2 inches high. EZAccess TRANSITIONS Angled Entry Plate Instructions EZAccess TRANSITIONS Angled Entry Plate Specifications EZAccess TRANSITIONS Brochure EZAccess TRANSITIONS Angled Entry Plate 10 inch Specifications: Overall dimensions: 10 inches long, 32 inches wide, 0.695 inch high. Usable height: Up to 1-5/8 inch. Capacity: 700 lbs. Item weight: 4.25 lbs. Material: High-strength aluminum. Choose: Single ramp or Package of 3.
  • Price: $56.99
  • EZAccess TRANSITIONS Angled 8 inch Plate
  • Description: The EZAccess TRANSITIONS Angled 8 inch Plate is a high-strength aluminum ramp that is portable and easy to install. The slip-resistant ramp allows people to easily cross thresholds up to 1-5/16 inches high. The EZAccess TRANSITIONS Angled 8 inch Plate has an applied tread surface that provides increased traction to help prevent falls, even when wet. It helps eliminate trip hazards, accommodates most mobility devices, and will not rust or corrode over time. The stand alone ramp measures 8 inches long, 32 inches wide, and has a weight capacity of 700 pounds. EZAccess TRANSITIONS Angled 8 inch Plate features formed aluminum construction for simple, one-step threshold navigation, and an applied, slip-resistant surface for greater traction, even when wet. EZAccess TRANSITIONS Angled Entry Plate Instructions EZAccess TRANSITIONS Angled Entry Plate Specifications EZAccess TRANSITIONS Brochure Buy 3 or more and Save $$. Click on Quantity Discount Pricing Above. EZAccess TRANSITIONS Angled Entry Plate 8 inch Specifications: Overall dimensions: 8 inches long, 32 inches wide, 0.695 inch high. Usable height: Up to 1-5/16 inches. Capacity: 700 lbs. Item weight: 3.5 lbs. Material: High-strength aluminum. Choose: Single ramp or Package of 3.
  • Price: $51.99
  • EZAccess TRANSITIONS Angled 12 inch Plate
  • Description: The EZAccess TRANSITIONS Angled 12 inch Plate is a portable threshold plate that is slip-resistant and easy to install and use. This plate makes crossing thresholds up to 2 inches high easier for people who use mobility devices. The EZAccess TRANSITIONS Angled 12 inch Plate is ideal for various conditions thanks to its applied tread. The high-strength aluminum plate will not rust or corrode over time, makes crossing thresholds safer and easier, and accommodates most mobility devices. The EZAccess TRANSITIONS Angled 12 Inch Plate is made of formed aluminum construction for simple, one-step threshold navigation. The EZAccess TRANSITIONS Angled Plate is available in three lengths (8, 10, and 12 inches) to accommodate thresholds up to 2 inches high. EZAccess TRANSITIONS Angled Entry Plate Instructions EZAccess TRANSITIONS Angled Entry Plate Specifications EZAccess TRANSITIONS Brochure EZAccess TRANSITIONS Angled 12 inch Plate Specifications: Overall dimensions: 12 inches long, 32 inches wide, 0.695 inch high. Usable height: Up to 2 inches. Capacity: 700 lbs. Item weight: 5 lbs. Material: High-strength aluminum. Choose: Single ramp or Package of 3.
  • Price: $59.99
Last Updated On Sunday, September 20th 2020
Images, Information & Products Are Property of & Supplied By Their Respected Merchant/Source That We Proudly List.
 © Road To Serenity Is Property Of A And L Merchants, Inc. Of Black River Falls, WI. ™ ALM Trademark
Return To Top Return Home


Health

Kentones

Wright Stuff

General Items

Around the House

Fitness

For Your Comfort

Getting Ready

In The Kitchen

On The Move

Mobility

F.Y.I.

Here To Help