Description: For individuals who utilize wheelchair or scooters, a standard rain coat will not adequately cover their entire body. The Wheelchair Rain Poncho in Navy is a water repellent poncho that is modified for wheelchair and scooter users. The back of the Wheelchair Rain Poncho in Navy is shorter to prevent it from becoming entangled in the wheelchair wheels, and the front is longer to cover the wearer's legs. The waterproof poncho made of durable SupplexÂ® has a full lining made of super soft poly cotton fabric. The over sized hood and zippered front closure make this poncho easy to slip on and off for people with limited mobility. Wheelchair Rain Poncho in Navy Specifications: Materials: Water repellent SupplexÂ® shell, poly cotton lining. Color: Navy Blue. Care: Machine washable. Weight: 2.00 lbs. Made in: U.S.A. Measures: 73 inches long in front, 56 3/8 inches long in back. Hood opening: Zippered closure.
Description: The Scooter Joystick Cover slips over the joystick of a scooter or electric wheelchair to protect it from moisture. Exposed areas around the joystick of a power wheelchair can allow moisture enter and cause electrical problems. This thoughtfully designed cover provides protection from moisture. The Joystick Cover has a clear plastic that allows the user to easily see the scooter controls. An adjustable buckle allows the user tighten the cover closely around the armrest and joystick, or leave it loose enough to slide your hand into the cover so that it stays warm and dry too. The Joystick cover is made in the USA from high-quality durable nylon with urethane coating, for years of durable moisture-resistant use. The cover measures 14 inches long, 5 inches wide, 4 inches deep. Diestco Scooter Joystick Cover Specifications: Material: Durable nylon with urethane coating. Measures: 14 inches long, 5 inches wide, 4 inches high. Color: Black.
Description: The Walker Holder for Scooters by Diestco allows scooter users to carry a standard folding walker on the back of the scooter seat. This durable bag is designed to secure the walker on scooters or electric wheelchairs. The Walker Holder for Scooters allows mobility scooter users to easily carry a walker. Constructed of high quality water resistant fabric, the bag has added reflective safety tape and is made in U.S.A. To attach the walker carrier to a scooter, slip the harness over the top of your seat back so that the fastening straps and bottom pocket hang from the seat back, and then tighten the harness at the buckle. Place the folded walker down into the bottom pocket and then pull the fastening straps around the walker and buckle. The holder fits seat backs from 6 to 26 inches high. The Walker Holder for Scooters provides mobility scooter users and easy way to carry a standard walker for more mobility options. Walker Holder for Scooters by Diestco Instructions Walker Holder for Scooters Specifications: Measures: 24 inches wide, 10 inches high, 3 inches deep. Material: High quality water-resistant fabric with durable nylon straps. Made in: USA. Holds: Standard style folding walker. Fits: Scooter and powerchair seat backs from 6 to 26 inches high. Made in: USA.
Description: The Diestco Scooter Tiller Small Cover features a clear fabric design so that electric scooter controls are still visible while the user operates the scooter with the cover on. Simply slip the cover over the scooter tiller handles and secure. The Scooter Tiller Small Cover is a form fitted small size cover designed for small travel scooters. The cover protects the scooter controls on tiller from moisture to prevent any unwanted water damage. Scooter users will also find the cover keeps hands warm and dry. The small scooter tiller cover is made of water-resistant nylon fabric and plastic, and is made in the USA. Diestco Scooter Tiller Small Cover Specifications: Material: Water resistant nylon fabric. Measures: 16.5 inches wide, 8.5 inches deep, 9 inches high. Circumference: 42 inches. Color: Black. Made in: U.S.A.
Description: The Diestco 2 Piece Scooter Seat and Tiller Cover helps protect your electric scooter seat and tiller from moisture by preventing any unwanted water damage to your power scooter. It works great with your power scooter seat and tiller on lifts or for storing outside. When using the tiller cover in operations, controls are still visible. The seat cover not only protects your seat from moisture, you can also sit in your seat while the cover is on. Locking drawstring keeps it tight around the base of your seat. These covers form fit to your power mobility vehicle. Simply slip it over your scooter and use the locking drawstrings along the bottom to secure. The Regular Tiller Cover measures 16 inches wide, 15 inches high, and 9 inches deep. The Seat Cover fits up to a 20 inch wide seat. The Scooter Seat Cover and Tiller Cover are also sold separately. 2 piece Scooter Seat and Tiller Cover Set Specifications: Material: Water-resistant nylon fabric and plastic. Attaches: Locking drawstrings. Includes: Regular Tiller cover MDV2100 and Seat Cover MDV2010.
Description: The Granny Jo Mobility Scooter Mittens are fleece lined, water resistant hand covers that easily slide over most scooter handle controls. Scooter users will find this pair of mittens provide hand protection while allowing easy access to scooter controls. The Granny Jo Mobility Scooter Mittens are easy to use, simply slide the hands inside the opening to keep hands warm and protected. The mittens secure over the scooter controls with hook and loop straps. Granny Jo Mobility Scooter Mittens are available in blue or purple. Granny Jo Mobility Scooter Mittens Specifications: Measure: 7.5 inch hand opening, 12 inches long, 6 inch wide opening for handlebar. Choose color: Blue or Purple. Materials: Water resistant nylon shell with a polyester fleece lining. Includes: One pair.
Description: The Diescto Powerchair Cover Super Size Heavy Duty is an extra large cover made of durable fabric that provides maximum protection. Power wheelchair users will find this cover slips easily over a large electric wheelchair and provides protection from the rain, sun, and wind. The Diestco Powerchair Cover Super Size Heavy Duty is ideal for outdoor storage or when transporting a power chair or scooter. The cover has a 6 inch top slit that allows the user to use an internal vehicle lift without taking the cover off the scooter. The cover is made from 600x300 polyester with PVC rubber to provide the highest level of protection from the elements. This heavy duty model cover has a 1 inch webbing belt through belt loops to tighten. It is lightweight and easy to get on and off. Slip the cover over the chair and pull the elastic down under the frame. The cord lock tightens the cover around the bottom. For extra security, when transporting a power chair on the back of a vehicle, tie down the bottom by hooking bungee-type cords (not included) through the bottom belt loops. Please note, the cover is not intended for highway use without using some securing device such as a rope or bungee cords over the top of the cover. This will reduce the amount of excess room under the cover and prevent the cover from blowing up at high speeds. Depending on your scooter, the cover may not fit over the scooter or power chair wheels. Please include the model of the power chair with your order. Diestco Powerchair Cover Super Size Heavy Duty Instructions Diestco Powerchair Cover Super Size Heavy Duty Specifications: Materials: 600x300 polyester with PVC rubber. Color: Black. Measures: 48 inches high, 31 inches wide, 44 inches long, 150 inch circumference. Made in: USA.
Description: The Diestco Scooter Seat Cover is made of high quality, durable nylon with a urethane coating which protects the scooter seat from moisture and prevents damage. The large seat cover measures 38 inches long, 28 inches wide, 11 inches deep and has a circumference of 98 inches. This durable cover is designed to fit scooter seats up to 20 inches wide. The Diestco Scooter Seat Cover was designed for individuals using a mobility scooter due to lower extremity weakness or limited mobility. This weatherproof scooter seat cover uses a locking drawstring to secure the cover around the bottom of the scooter seat. The cover can be left on the scooter seat while the scooter is driven or while it is being transported on a lift. Diestco Scooter Seat Cover: Measures: 38 inches long, 28 inches wide, 11 inches deep. Fits: Seats up to 20 inches wide. Material: High quality durable nylon with urethane coating. Color: Black. Made in: U.S.A.