Description: The Wireless Wander Door Alarm is an easy to install and use safety system for preventing wandering. The 2 part system consists of a door or winder sensor and a wireless receiver that alerts the caregiver. The Wireless Wander Door Alarm is easy to install on doors or windows. The door or window sensor attaches easily to a door and doorjamb or to a window and window frame. When the door or window is opened, the electronic signal is sent to the remote receiver. The signal alerts the caregiver that the person has opened the door or window and is either wandering out of safe range or entering a non-supervised area. The receiver can be set to chime or vibrate, and the alerting chime rings at 80 to 85 decibels. The wireless receiver can be up to 100 feet from sensor. The Wireless Wander Door Alarm System includes a battery in the sending unit and mounting instructions. Wireless Wander Door Alarm Instructions Wireless Wander Door Alarm Specifications: Range: Up to 100 feet. Alerting chime ring level: 80 to 85 decibels. Sending unit uses: One 9V battery (not included). Receiver uses: One 12V battery (included).
Description: The AC Adapter for Wander Alarms is an optional power supply adapter for the wander alarms. This 9 volt adapter eliminates the need for battery replacement in the receiver of the Wander Alarm with Motion Detector, CSG3939, and the Wireless Wander Door Alarm, CSG5959.
Description: The Smart Caregiver Cordless Alarm and Chair Pad immediately alerts caretakers when their patient attempts to leave their chair. The Chair Pad provides an early warning alert system to the caretaker. This helps prevent falls, wandering off, and other unfortunate incidents. This chair pad alarm system is cord-free, wireless, pre-programmed, and is perfect for homes or small facilities. The Smart Caregiver Cordless Alarm and Chair Pad has a range between 150-300 feet. There are no cords connecting the alarm and the chair sensor pad. This allows the caregiver to place the monitor in another room so that there is no alarm going off in the room with the resident. The Smart Caregiver 433EC Economy Cordless Alarm can be mounted away from the chair, removing in-room alarm noise and reducing entanglements and tripping hazards. The alarm has a low, medium, high volume adjustment, and a gentle chime alert that offers a quieter fall prevention alert. The monitor is simple-to-use and works with all 433 Cordless Sensor Pads & Mats, Nurse Call Buttons, and Motion Sensors. The 433EC Economy Wireless Alarm is light-weight and can be paired with up to six (6) wireless components to serve as a portable caregiver alert. The Smart Caregiver Chair Pad is a 10 inch wide, 15 inch long sensor pad. The pad is made of soft vinyl that is easy to wipe clean and incontinence resistant. The chair sensor pad should be placed under user. When the resident removes their body weight from the pad, the monitor will alert the caregiver. The Smart Caregiver Cordless Alarm and Chair Pad is programmed, ready to use out of the box, and includes batteries for the monitor. Smart Caregiver Cordless Alarm and Chair Pad Specifications: Includes: 433EC Economy Cordless Monitor, GCT-WI 10 inch wide, 15 inch long Cordless Chair Pad with 1 year warranty, batteries, retail packaging. Alarm volume: Between 70-80 decibels. Dimensions: 3.5 inches long, 1.5 inch wide, 5 inches high. Range: 150 - 300 feet. Power: Three C batteries (included), or optional AC Adapter (AC-04). Also works with (and sold separately): 433-MS Motion Sensor, 433-NC Nurse Call button, GBTR1-10x30 inch Cordless Bed Pad, CBGBTWI 20 x 30 inch bed sensor pad, and FMT03C, FMT05C, FMT07C pressure sensing floor mats.
Description: The Smart Caregiver Wireless Alarm and Bed Pad is an affordable and effective monitoring alarm system. This bed pad alarm system is cord-free, wireless, pre-programmed, and has a range up to 300 feet. The Smart Caregiver Wireless Alarm helps monitor those with poor motor skills, are disabled or elderly, and anyone else that struggles with mobility. This product provides caregivers and families ease of mind. The Smart Caregiver Wireless Alarm and Bed Pad will alert the caregiver and provide an early warning when the user attempts to exit the bed. This system is cordless, meaning there are no cords connecting the alarm to the bed sensor pad. This allows the caregiver to place the monitor in another room so that there is no alarm going off in the room with the resident. The system has between 150-300 foot range. The Smart Caregiver 433EC Economy Wireless Alarm can be mounted away from the bed, removing in-room alarm noise and reducing entanglements and tripping hazards. The alarm has a low, medium, high volume adjustment, and a gentle chime alert that offers a quieter fall prevention alert. The alarm is simple-to-use and works with all 433 Cordless Sensor Pads & Mats, Nurse Call Buttons, and Motion Sensors. The 433EC monitor is light-weight and can be paired with up to six (6) wireless components to serve as a portable caregiver alert. The Smart Caregiver Bed Pad is a 10 inch wide, 30 inch long bed sensor pad. The pad is made of soft vinyl that is easy to wipe clean and incontinence resistant. The bed sensor pad should be placed under the fitted sheet on top of the mattress around shoulder level. When the resident removes their body weight from the pad, the monitor will alert the caregiver. The Smart Caregiver Cordless Alarm and Bed Pad is programmed, ready to use out of the box, and includes batteries for the monitor. Smart Caregiver Cordless Alarm and Bed Pad Specifications: Includes: 433EC Economy Wireless Monitor, BR1 10 inch wide, 30 inch long Wireless BedPad with 1 year warranty, batteries, retail packaging. Alarm volume: Between 70-80 decibels. Dimensions: 3.5 inches long, 1.5 inch wide, 5 inches high. Range: 150 - 300 feet. Power: Three C batteries (included), or optional AC Adapter (AC-04). Also works with (and sold separately): 433-MS Motion Sensor, 433-NC Nurse Call button, GBTWI 20 x 30 inch bed sensor pad, GCTWI 10 x 15 chair sensor pad, and FMT03C, FMT05C, FMT07C pressure sensing floor mats.
Description: The Smart Caregiver Cordless Alarm and Floor Pad immediately alerts caregivers when the patient puts pressure on the sensor matt. This floor pad alarm system is cord-free, wireless, pre-programmed, and has a range up to 300 feet. Place the pad at the bedside or in doorways to monitor patients and help prevent dangerous falls. The Smart Caregiver Cordless Alarm and Floor Pad is an affordable and effective cord-free wireless system that is pre-programmed, ready to use out of the box. This monitor system is ideal for home or small facility use and has a range between 150-300 feet. There are no cords connecting the alarm and the floor sensor pad. This allows the caregiver to place the monitor in another room so that there is no alarm going off in the room with the user. The Smart Caregiver 433EC Economy Cordless Alarm can be mounted away from the user's room, eliminating in-room alarm noise and reducing entanglements and tripping hazards. The alarm has a low, medium, high volume adjustment, and a gentle chime alert that offers a quieter fall prevention alert. The monitor is simple-to-use and works with all 433 Cordless Sensor Pads & Mats, Nurse Call Buttons, and Motion Sensors. The 433EC Economy Wireless Alarm is light-weight and can be paired with up to six (6) wireless components to serve as a portable caregiver alert. The Smart Caregiver Floor Pad is a 24 inch wide, 36 inch long sensor pad. This heavy duty, industrial weight floor mat has beveled edges and a non-slip grip. The floor sensor pad should be placed beside the bed or in a doorway. When the user gets out of bed or tries to leave the room and applies pressure to the mat, the signal is sent to the monitor to alert the caregiver. The Smart Caregiver Cordless Alarm and Floor Pad is programmed, ready to use out of the box, and includes batteries for the monitor. Smart Caregiver Cordless Alarm and Floor Pad Specifications: Includes: 433EC Economy Cordless Monitor, FMT05C 24 inch wide, 36 inch long Cordless Floor Pad with 1 year warranty, batteries, retail packaging. Alarm volume: Between 70-80 decibels. Dimensions: 3.5 inches long, 1.5 inch wide, 5 inches high. Range: 150 - 300 feet. Power: Three C batteries (included), or optional AC Adapter (AC-04). Also works with (and sold separately): 433-MS Motion Sensor, 433-NC Nurse Call button, GBTR1-10x30 inch Cordless Bed Pad, CBGBTWI 20 x 30 inch bed sensor pad, and FMT03C, FMT07C pressure sensing floor mats.
Description: The Safeguard Wander Alarm with Motion Detector detects movement of a person in a bed, chair, room or doorway to alert the caregiver. An audible alert can be set on the motion detecting transmitter, or can be set to signal a chime or vibration on the wireless chime receiver. The Wander Alarm with Motion Detector is an easy to install wireless motion sensor system designed to help prevent falls and wandering. The sensor can detect the movement of a person in a bed, chair, room or doorway to alert the caregiver. Once activated, the wireless motion sensor sends an alerts that help is needed.The small receiver can be mounted wherever convenient, and can be placed up to 100 feet away from the motion detector. An audible alert can be set on the motion detecting transmitter, or can be set to signal a chime or vibration on the wireless chime receiver. The Wander Alarm with Motion Detector is ideal for use above a door or bed, next to a stairway or to monitor other areas to help prevent loved ones from wandering. Safeguard Wander Alarm with Motion Detector Instructions Wander Alarm with Motion Detector Specifications: Power: Requires two 9 volt batteries, one for the sender, and one for the receiver. Batteries not included Receiver range: Up to 100 feet depending on building construction. Set to chime: The alarm will sound at the sensor. Set to remote: A signal will be sent to the pager/receiver.