Road To Serenity Menu Our Other Sites

We Have Advertising Relationships With The Merchant(s)/Store(s) On This Page.
Date Started February 10, 2007

We Collect No Information From You


Try Our Quick Search Bar

Bed Chair Couch Standing Aids

  • Stander Recliner Riser
  • Description: The Stander Recliner Riser is a safe and easy solution to helping you get up safely from your recliner. When you stand from the typical recliner, it tilts forward, dropping the arms and seat of an already low chair by 3 - 4 inches. Simply raising the chair by 5 or 6 inches, necessary for independent standing, makes it dangerously unstable. When Recliner Risers are installed, they raise a chair 1.75 inches and limit the forward tilt allowing an additional 3 - 4 inches of lift. The 4 - 6 total inches of extra support gives a weakened person a biomechanical advantage and enables them to stand on their own. Recliner Risers attach quickly and easily to the wooden base of your favorite recliner. Our patented design raises your effective seat height 4 - 6 inches while only raising your chair 1.75 inches. Recliner Risers help give your chair a lift. Standers Recliner Riser Specifications: Riser Dimensions: 1.75 inches high, 2.5 inches wide, 6 inches long. Weight Capacity: 800 lbs (including furniture). Includes: Four Recliner Risers, two Rocker Limiters, 16 screws, Velcro, and instruction manual. WARNING: Important information for California residents
  • Price: $35.00
  • Ezer-Up Extended Adjustable Furniture Risers
  • Description: The Ezer-Up Extended Adjustable Furniture Risers are non-slip, durable risers for furniture up to 40 inches wide. These sturdy, hand-assembled furniture risers provide 3 inches of lift to help make standing up and sitting down easier. Ezer-Up Extended Adjustable Furniture Risers are a simple, attractive solution for furniture that is too low, old, sagging and causing the user to experience difficulty when standing or sitting. People who sit with their knees higher than their hips often have pain and discomfort when sitting, and increased difficulty when rising to stand. These furniture risers are easy to install. An easy-to-turn wing nut allows the risers to be adjusted from 28 inches to 40 inches long to fit the width of the legs of the furniture. Inside the risers are steel reinforcements that support the outer shell to provide increased support and safety. The riser tops measure 4 x 4 inches to accommodate a wide variety of leg shapes and sizes. The non-slip gripping pads help to prevent the furniture feet from slipping. The bottom surface of the riser is textured and non slip, and will not harm floor surfaces. People who have difficulty standing from a low chair or sofa will find Ezer-Ups helpful for making standing easier. Please note: Ezer-Ups are not recommended for use with recliners, rockers, swivel chairs or sectionals. Ezer-Ups are stationary and do not move after installation. Ezer-Up Extended Adjustable Furniture Risers Specifications: Elevates furniture: 3 inches. Weight limit: 420 pounds per leg, 1680 pounds per set. Fits: Furniture up to 40 inches wide including sofas, loveseats, chairs. Not recommended for recliners, rockers, swivel chairs or sectionals. Base Measures: 5 inches wide, 29 inches long extends to 40 inches long. Includes: One pair of adjustable risers, installation instructions. Materials: ABS plastic, steel core. Made in: USA.
  • Price: $184.95
  • Ezer-Up Adjustable Furniture Risers
  • Description: The Ezer-Up Adjustable Furniture Risers are non-slip, durable risers that provide 3 inches of lift to help make standing up and sitting down easier. The easy to install and adjust risers fit a variety of styles of furniture up to 35 inches wide. Ezer-Up Adjustable Furniture Risers are an easy to install, attractive solution for furniture that is too low, old, sagging and causing the user to experience difficulty when standing or sitting. A large wing nut allows the risers to be adjusted from 28 inches to 35 inches long to easily fit different widths. Inside the risers are steel reinforcements that support the outer shell to provide increased support and safety. The riser tops measure 4 x 4 inches and accommodate a variety of leg shapes and sizes. The non-slip gripping pads help prevent the furniture feet from slipping. The bottom surface of the riser is textured and non slip, and will not harm floor surfaces. People who often have pain and discomfort, increased difficulty when sitting or rising to stand will find Ezer-Ups helpful for making transfers easier. Please note: Ezer-Ups are not recommended for use with recliners, rockers, swivel chairs or sectionals. Ezer-Ups are stationary and do not move after installation. Ezer-Up Adjustable Furniture Risers Specifications: Elevates furniture: 3 inches. Weight limit: 420 pounds per leg, 1680 pounds per set. Fits: Furniture up to 35 inches wide including sofas, loveseats, chairs. Not recommended for recliners, rockers, swivel chairs or sectionals. Base Measures: 5 inches wide, 29 inches long extends to 35 inches long. Includes: One pair of adjustable risers, installation instructions. Materials: ABS plastic, steel core. Made in: USA.
  • Price: $151.95
  • Little Boost Platform
  • Description: Do you struggle getting out of your favorite chair? Need a boost? The affordable Little Boost Platform is ideal for people who suffer from lower extremity weakness, bad backs, or have difficulty rising from a recliner. This platform is the safest and sturdiest chair riser on the market today. The simple design requires no assembly and there are no moving parts. The Little Boost Platform fits recliners with either a rectangular base up to 27 x 27 inches, or a round base with a diameter up to 27 inches. Measure the base of the chair to ensure a proper fit. The platform raises the chair 3 inches to make standing and sitting easier. The platform has a 1/2 inch high security lip around the top edge, and rubber pads installed in each corner for increased safety to prevent the chair from moving or sliding. Little Boost Platform Specifications: Construction: Durable, recyclable ABS black plastic. Weight: 17 pounds. Weight capacity: 500 pounds. Overall Dimensions: 31.5 inches x 31.5 inches x 3.5 inches. Made in: USA.
  • Price: $169.95
  • Triple Loop Quad Leg Lifter
  • Description: The Triple Loop Quad Leg Lifter is a long handle with loops that allow the user's arms to help lift their leg onto a wheelchair rest, bed, or into a car. The three large loops provide forearm assisted leg positioning. The Triple Loop Quad Leg Lifter is made with 1 inch heavy-duty webbing. The leg lifter features a pre-formed foot support with a heavy gauge wire insert that can be modified by bending it to the desired shape. Reinforced webbing with metal rod will extend the user's reach to assist in lifting one leg at a time. The loop is placed around the foot or cast and allows the user to easily life and position their leg. The Triple Loop Quad Leg Lift measures 40 inches long. Triple Loop Quad Leg Lifter Specifications: Length: 40 inches. Materials: 1 inch heavy-duty webbing reinforced webbing with metal rod. Model: Kinsman 31061.
  • Price: $13.95
  • Small Rainbow Leg Lifter
  • Description: The Small Rainbow Leg Lifter is a metal rod with a foot loop and reinforced webbing for easy lifting or positioning of a weak leg. This brightly colored leg lifting aid comes in either a 33 inch or 27 inch long size. The pre-formed foot support loop can be modified by bending it to the desired shape. The rod extends the users reach to aid in lifting one leg at a time. Small Rainbow Leg Lifter Specifications: Length: 27 inches or 33 inches Width: 1 inch Color: Rainbow colored stripes
  • Price: $10.95
  • Mangar Leglifter Cushion with Airflo 12
  • Description: The Mangar Leglifter Cushion is an inflatable leg lifting aid helpful for people who have trouble raising their legs into bed. This easy to use bed mobility aid fits discreetly against the side of the bed when it is not in use. The Mangar Leglifter Cushion is ideal for anyone who requires assistance when transferring or lifting their legs into bed. The lifter is attached to the user’s bed using straps underneath the mattress. Powered using the Airflo 12 Compressor, the whole lifting process only takes a couple of minutes. Users will find they can transfer safely into bed in a quick, dignified way. This inflatable leg lifting cushion does not require a permanent installation, making it ideal for travel. Mangar Leglifter Cushion Information Mangar Leglifter Cushion Instructions Non returnable if packaging is opened. Mangar Leglifter Cushion Specifications: Maximum User Weight: 294 lbs. Inflated Length: 49 inches. Inflated Width: 22.5 inches. Inflated Thickness: 4 inches. Deflated Thickness: 1 inch. Weight: Cushion 3 lbs, Airflo 12 10 lbs. Includes: Mangar Leglifter Cushion with removable cover, Airflo 12 Compressor. Care: Remove cover and machine wash, hang to dry.
  • Price: $639.95
  • Leg Wrap Leg Lifter
  • Description: The Leg Wrap Leg Lifter provides convenient handles for moving and positioning a weak leg. The strap attaches to the user in 3 places to assist in supporting the leg during transfers to or from a bed, chair, sofa, wheelchair or toilet seat. The Leg Wrap Leg Lifter is an easy to use leg positioning aid with upper and lower handles that eliminate the need to grab clothing. The multiple strap leg lifting device provides controlled movement and reduces the risk of injury caused by dropping the legs. The Leg Wrap Leg Lifter is made of high strength nylon webbing that is 2 inches wide, and it measures 33 inches long. The maximum circumference measures 11-1/2 inches for the ankle strap, 18-1/2 inches for the knee strap, 24-1/2 inches for the thigh strap. The loops can be made smaller, but not larger than these sizes. Leg Wrap Leg Lifter Specifications: Material: High strength, nylon webbing. Measures: 2 inches wide, 33 inches long. Maximum circumference measures: 11.5 inches ankle strap, 18.5 inches knee strap, 24.5 inches for the thigh strap. WARNING: Important information for California residents
  • Price: $44.95
  • Leg Lifter
  • Description: The Leg Lifter is designed to help make lifting a weak or casted leg onto a bed easier. This leg lifting aid features reinforced polyester webbing over a rigid but adjustable metal rod. The Leg Lifter has a hand loop located at one end and a larger foot loop at the other. The foot loop opening can be positioned to accommodate a foot cast. Durable reinforced 1 inch polyester webbing covers a rigid but adjustable 26 inch long metal rod. The Leg Lifter measures 42 inches long overall. Leg Lifter Specifications: Length: 42 inches. Color: Navy Blue. Material: Aluminum rod and foothold covered with webbing.
  • Price: $10.95
  • Leg Loop Leg Lift
  • Description: The Leg Loop Leg Lift allows a person to safely and effectively reposition their leg and foot. This easy to use leg positioning aid provides users a more secure grip for lifting a weak or injured leg or foot. The Leg Loop Leg Lift has a hand loop and a foot loop, positioned at each end of a rigid middle section. The foot loop stays open until the strap is pulled. Once pulled, the loop closes and conforms to the shape of the foot for a secure and comfortable fit. The rigid middle section allows users to easy maneuver the leg into position. This leg lifting device is designed to help people who have medical conditions in which they either partially or completely lose the ability to independently move their leg such as paraplegia, hemiplegia, paraparesis, hip surgery, and knee surgery. Made of 1 inch wide durable high strength nylon webbing, the leg lifter measures 36 inches long. Users with limited lower extremity strength will find the Leg Loop Leg Lift helpful for positioning their leg and foot onto a wheelchair footrest, bed or into a car, for comfort and safety. Leg Loop Leg Lift Specifications: Material High strength, nylon webbing. Measures: 36 inches long, 1 inch wide. Color: Black.
  • Price: $16.95
  • The Transfer Handle
  • Description: The Transfer Handle provides a stable rail to help make transfers and bed mobility easier. This transfer aid fits home bed and is easy to install. The Transfer Handle has a large handle attached to a board that provides a sturdy support to make transfers easier. This bed transfer aid is helpful for users when transferring from a bed to a wheelchair, or bed to a bedside commode. The handle provides a stable support for users to transfer safely, helping to prevent falls and injuries. The handle is 22 inches high and fits mattresses up to 14 inches thick. The durable steel, 1 inch diameter, handle is 6 inches wide and is mounted to a 30 inch long, 27 inch wide bed board. The Transfer Handle is easy to install, just slide the board between the mattress and box springs of a home bed. The Transfer Handle Specifications: Handle measures: 22 inches high, Inside width 4 inches, outside width 6 inches. Bed board measures: 27 inches wide, 30 inches long. Fits: Home beds. Weight limit: 250 lbs. Item weighs: 17 pounds. Made in: USA.
  • Price: $109.95
  • Freedom Grip Bed Handle
  • Description: The Freedom Grip Bed Handle provides a sturdy support handle that helps make getting in and out of the bed easier. Users who need assistance when moving in bed or transfers out of bed will find this item helpful for maintaining their independence. The Freedom Grip Bed Handle is an economic solution for users who need a helping hand getting out of bed. The bed transfer handle allows users to wake up with confidence and freedom knowing they can get out of bed safely. Users will find the bed handle provides sturdy support for standing and balancing, helps prevent falls and injuries, and helps improve mobility in bed. The handle has a non-slip grip for added comfort and safety. The handle has a 20 inch wide, 28 inch long bed board that slides between the mattress and box spring for increased stability. The handle fits home beds with standard height mattresses. The frame is made of steel, the handle is simple to snap into place, and does not require tools for installation. The Freedom Grip Bed Handle is designed for users weighing 150 lbs or less. Freedom Grip Bed Handle Specifications: Bed board measures: 20 inches wide, 28 inches long. Handle width: 9 inches. Handle height: 20.5 inches. Weight capacity: 150 lbs. Item weight: 11 pounds.
  • Price: $64.95
  • Freedom Grip Plus Bed Transfer Handle
  • Description: The Freedom Grip Plus Bed Transfer Handle is a height adjustable support handle designed to help users get in and out of bed easier. This bed rail handle accommodates home beds with thicker mattresses The Freedom Grip Plus Bed Transfer Handle provides users a sturdy support handle and assists users who want to get in and out of bed on their own to maintain their independence. The height adjustable handle is designed to accommodate thicker mattresses. The top of the handle is covered with skin friendly foam for a comfortable grip and increased safety. The handle adjusts from 21.5 to 24.5 inches in height, in 1 inch increments. The adjustable bed support handle is easy to install without tools. TheFreedom Grip Plus Bed Transfer Handle safety bed rail helps users get in and out of bed while reducing the risk of falls. It is ideal for stroke and Parkinsons patients as well as those with severe back pain, arthritis or injuries. The bed handle serves as a reminder of where the edge of the bed is, and is useful in helping to turn over or move in bed. The Freedom Grip Plus Bed Handle is the best combination of safety and economy. Freedom Grip Plus Bed Transfer Handle Specifications: Handle Width: 9 inches outside, 7.5 inches inside. Bed Board Width: 20 inches. Bed Board Length: 29 inches. Product Weight: 11 lbs. Weight Capacity: 250 lbs. Made in: USA.
  • Price: $69.95
  • Grip Solutions Transfer Mat
  • Description: The Grip Solutions Transfer Mat is a flexible, non-slip pad designed to provide a secure surface for users to transfer from sitting to standing. The large, textured mat helps prevent the user’s feet from slipping when attempting to stand up or sit down. The Grip Solutions Transfer Mat measures 16 inches wide and 16 inches deep. The non-slip but not sticky square transfer pad helps users to safely and effectively transition from a sitting to standing position and vice versa. The mat can also be used to stabilize wheelchair seat cushions, act as a large place mat, and secure items to prevent them from slipping. Durable, lightweight, waterproof, tactile-friendly, not sticky or tacky proprietary material is latex-free, heat stable to 240 degrees, and abrasion resistant. The Grip Solutions Transfer Mat is easy to clean and disinfect and the non-slip properties last through thousands of cleanings. Grip Solutions Transfer Mat Specifications: Texture: Pebble. Color: Black/Yellow. Dimensions: 16 inches wide, 16 inches long. Material: Proprietary abrasion resistance/non-slip PVC based thermoplastic coating. Co-efficient of friction: ASTM D 3247 Wet: 0.83, Dry: 1.36. Care: Clean with soap & water, disinfectant wipes, common household cleaning liquids or can be placed in the dishwasher.
  • Price: $29.95
  • HealthCraft SuperPole System
  • Description: The HealthCraft SuperPole System is an easy to install floor-to-ceiling pole that helps make transfers easier. This transfer system provides support and balance assistance to those who need extra help transitioning from a seated position to a standing position. The HealthCraft SuperPole is a secure structure that can be installed in minutes between a floor and ceiling. The jackscrew expansion creates enough tension between the floor and ceiling to hold the pole securely. Rubber pads on the ceiling plate and the floor plate hold the transfer pole in place and prevent marring of the ceiling or floor. This transfer assist pole installs easily with no structural reinforcements needed. The foam hand grip provides a comfortable gripping surface. People who require assistance to stand will find this pole is useful beside a bed, bath, toilet or chair. The following add-on accessories are available for the SuperPole System: The SuperBar Add On Kit, SuperTrapeze Add On Kit, Uni-Fit Extender, Ceiling Plate Extender, Angled Ceiling Plate. Note: The SuperPoleâ„¢ System should only be installed between floors and ceilings of solid construction or injury may result. The SuperPole Systemâ„¢ should not be installed on loose floor coverings, in rooms with radiant ceiling heating, in mobile homes, or in suspended or angled ceilings. Recommended weight limits are 300lbs. All designs and specifications subject to change without notice. HealthCraft SuperPole System Product Instructions HealthCraft SuperPole System Specifications: Material: Alloy steel. Finish: Anti-microbial powder coat white gloss finish. Grip material: Non-slip, PVC closed cell foam, latex free. Pole measures: 93 - 99 inches or 7 feet 9 inches to 8 feet 4 inches long, 1.5 inch diameter. Top plate measures: 20 inches long. Base Plate diameter: 5 inches. Maximum Weight Capacity: 300 pounds.(Standard) Standard Pole Weight: 13 pounds. Add-on options: SuperBar Add On Kit, SuperTrapeze Add On Kit, Uni-Fit Extender, Ceiling Plate Extender, Angled Ceiling Plate.
  • Price: $198.95
  • HealthCraft SuperPole System with SuperBar
  • Description: The HealthCraft SuperPole System with SuperBar is a floor-to-ceiling grab bar with an added horizontal bar extension for additional support. This easy to install safety pole provides support and balance assistance to those who need extra help transitioning from a seated position to a standing position. The HealthCraft Super Pole System with SuperBar is easy to install beside a bed, bath, toilet or chair. It is more compact than a walker in small restricted areas such as washrooms, and is useful for pivot transfers in narrow areas such as between bed and wall or in narrow hallways. This floor to ceiling transfer aid allows users to weight shift when moving or standing, getting into or out of the bed, during transfers to a wheelchair, walker or bedside commode. In a shower, the Super Pole with Super Bar provides complete support for stepping over the tub wall without reaching for wall grab bars. The SuperBar can pivot away from shower curtains, allowing them to fully close during a shower. For toilet transfers, the SuperBar permits pulling up to standing and can provide leaning support while managing clothing. The HealthCraft SuperBar unlocks and pivots freely to move with the user step by step. The bar securely locks every 45 degrees for stability during standing and sitting transfers. It automatically locks when released to prevent falls, and provides full support when making two or three step transfers. The HealthCraft SuperPole is installed between a floor and ceiling and is held by a jackscrew expansion. The screw expands, creating enough tension to hold the pole securely. Rubber pads on the ceiling plate and the floor plate hold the transfer pole in place and prevent marring of the ceiling or floor. The foam hand grip provides a comfortable gripping surface. HealthCraft SuperPole System with Product Instructions HealthCraft SuperPole System with SuperBar Specifications: Material: Alloy steel. Finish: Anti-microbial powder coat white gloss finish. Grip material: Non-slip, PVC closed cell foam, latex free. Bar measures: 1.5 inch diameter, 16 inches long. Bar height adjusts: 24 - 38 inches. Pole measures: 93 - 99 inches or 7 feet 9 inches to 8 feet 4 inches long, 1.5 inch diameter. Top plate measures: 20 inches long. Base Plate diameter: 5 inches. Maximum Weight Capacity: 300 pounds.(Standard) Item Weight: 24 pounds. Add-on options: Uni-Fit Extender, Ceiling Plate Extender, Angled Ceiling Plate.
  • Price: $272.95
  • HealthCraft SuperPole Uni-Fit Extender
  • Description: The HealthCraft SuperPole Uni-Fit Extender is an add-on accessory for the HealthCraft SuperPole. This extension increases the length of the SuperPole to fit high ceilings. The HealthCraft SuperPole Uni-Fit Extender is a separate piece that slides over the top end of the SuperPole to increase the height range to by 20 inches. The standard height range for the SuperPole is from 93-99 inches, and with the extension the range increases to 100-120 inches. SuperPole users with extra high ceilings can install the extension tube between the pole and the top plate. The extension tube has pre-drilled holes to adjust the height properly. The top end of the tube is secured to ceiling anchor plate with a second locking pin. HealthCraft SuperPole Uni-Fit Extender Instructions HealthCraft SuperPole Uni-Fit Extender Specifications: Fits: HealthCraft SuperPole. Construction: Alloy steel. Finish: Anti-microbial powder coat white gloss finish. Not to be used with: SuperTrapeze, SuperPole HD, or SuperPole Ultra.
  • Price: $74.95
  • Posey Hipsters Standard Brief
  • Description: The Posey Hipsters Standard Brief feature specially-designed foam pads in the hip areas that provide added protection for the wearer in the event of a fall. The foam pads are made from a high impact-absorbing foam that is designed to absorb impact. Posey Hipsters Standard Brief is made from comfortable poly/cotton Lycra®. Positioned over each hip is a low profile pad that is sewn in place. The high impact-absorbing viscoelastic pads help protect hip bones against injury from falls. The slim fitting brief design allows these safety briefs to be discreetly worn under clothing. The one-piece design allows for easy laundering at home or in healthcare facilities according to CDC guidelines. The standard unisex brief easily slips on over undergarments or can be worn as underwear. Posey Hipsters Standard Brief fits comfortably around the users' waist and features a latex-free elastic waistband. These external hip protector briefs with impact-absorbing pads over the critical hip fracture area are helpful for minimizing potential damage that can occur from a fall. Posey Hipsters® Instructions Posey Hipsters Brief Specifications: Small fits: Waist 28-30, hips 35-37 inches. Medium fits: Waist 30-34, hips 37-41 inches. Large fits: Waist 34-38, hips 41-45 inches. X-Large fits: Waist 38-42, hips 45-49 inches. XX-Large fits: Waist 42-46, hips 49-53 inches. Pads: Sewn-in, high impact absorbing foam. Materials: Latex-free, 95% Cotton/5% Spandex. Care: Machine wash 120°F and dry at medium temperature. Includes: One Pair.
  • Price: $37.95
  • Swivel Tray for Couch Cane
  • Description: The Swivel Tray for Couch Cane is a tray attachment with cup holder and pencil holder. This accessory for the Couch Cane easily attaches. People using the Stander Couch Cane will find the Swivel Tray a convenient accessory. Swivel Tray for Couch Cane Specifications: Fits: AST412 Stander Couch Cane. Measures: 16 inches wide, 18 inches long. Weight limit: 30 pounds. WARNING: Important information for California residents
  • Price: $64.95
  • Standers Bedside Econorail
  • Description: The Standers Bedside Econorail is a cushion handle bed rail that helps users easily transfer in and out of bed. The folding handle is made of aircraft-grade, hardened anodized aluminum, weighs less than 2 lbs, and supports up to 300 lbs. The Standers Bedside Econorail is an economy bed rail that installs on any home or hospital bed. Non-slip grips and a safety strap secures rail between the mattress and bed frame. The universal height of the handle accommodates home and hospital beds. The Standers Bedside Econorail snaps together easily, installs in seconds without tools. The handle collapses, fitting in small spaces, even carry-on suitcases and includes a carrying case for convenient travel. The included organizer pouch keeps needed items easily accessible. Bedside Econorail Assembly Instructions Standers Bedside Econorail Specifications: Weight: 1.5 pounds. Weight capacity: Up to 300 lbs. Includes: Organizer pouch. Fits: Home and hospital beds. Product Dimensions: 21.5 inches long, 20 inches wide, 16 inches high. WARNING: Important information for California residents
  • Price: $69.95
  • Stander Stable Rail
  • Description: The Standers Stable Rail bed transfer handle provides assistance for users to easily transfer in and out of bed. This height adjustable bed safety rail accommodates home beds and hospital beds. The extendable legs provide added stability and support for standing. The Stable Rail is an ideal device for those that need added support and assistance when getting in and out of bed. Users will find the ergonomic cushion handle allows provides a comfortable grip. The rail is secured between the mattress and bed frame with anti-slip grips. The bed safety handle is easily installed and supports up to 300 lbs. The Standers Stable Rail includes a 4 pocket organizer which provides storage space for handy items. Stable Rail Assembly Instructions Standers Stable Rail Specifications: Height adjustment from floor to top of handle: 31 inches - 44 inches. Height adjustment from mattress base to top of handle: 17.5 inches - 22.5 inches. Rail width: 19 inches. Height range from floor to horizontal support structure under mattress: 13.5 inches - 21.5 inches. Depth of horizontal support structure under mattress: 25 inches. Weight of product: 8 lbs. Weight capacity: 300 lbs. Made of: Steel frame with durable powder coat finish. WARNING: Important information for California residents
  • Price: $79.00
  • Stander Security Pole and Grab Bar
  • Description: The Stander Security Pole and Grab Bar is a tension mounted, floor to ceiling support that allows users to easily stand from a couch, bed, or toilet. The attached pivoting Curve Grab Bar provides 4 hand grips at 4 different heights that allows the user to pull to a standing position. The Security Pole and Grab Bar is easy to install without any screws, bolts or damage to walls or surfaces. The support pole can be placed in small, close spaces, ideal for next to a bed, couch, chair, or toilet. Rubber pads on the top and bottom of the pole protect the ceiling and floor, and the adjustable height fits ceiling heights ranging from 7 to 10 feet high. The attached Curve Grab Bar with 4 hand grips makes it easy to climb to a standing position, swivels out of the way, and locks in place every 45 degrees. Frequently Asked Stander Security Pole and Grab Bar Questions: How is it installed? The pole is tension mounted between the floor and the ceiling. It is not necessary to screw into the floor and ceiling, but screws are provided in case the user wants to. What tools are needed for assembly? A wrench is included with each unit and no other tools are needed for assembly. Does it damage the floor or ceiling? Rubber pads are on the bottom and top of the pole to protect the floor and ceiling. What ceiling heights does it accommodate? 7 to 10 ft. ceilings. Security Pole and Grab Bar Assembly Instructions Stander Security Pole and Grab Bar Specifications: Pole measures: 84-120 inches long, 12 inches wide, 7 inches deep, 1.5 inch diameter. Weight Capacity: 300 lbs. Fits Ceiling Heights: Range of 7 - 10 feet. Weight of Product: 20.5 lbs. Materials: Rust resistant zinc plated steel with durable powder coat finish. Colors: Metallic Black or Iceberg White. Includes: Grab bar, I-Frame, circular base, main pole piece, top and bottom pole pieces, extension piece, hardware, wrench, assembly instructions. WARNING: Important information for California residents
  • Price: $199.95
  • HealthCraft Smart-Rail System Bed Rail
  • Description: The HealthCraft Smart-Rail System Bed Rail is a bed safety rail that provides assistance for bed mobility, standing and transferring into and out of bed. This unique bed rail unlocks and pivots outward to provide better standing support with less reaching and twisting. The HealthCraft Smart-Rail System Bed Rail provides a great solution for people who have difficulty with bed mobility and bed transfers. The bed assist rail can be positioned in the closed and open position. The closed position with the rail parallel to the side of the bed, provides support for rolling side to side and positioning while in bed. The open position, the rail pivots out from the bed and touches down to the ground to assist the user when moving to a standing position. The Smart-Rail is easily installed between the mattress and box spring, and secured tightly with a safety strap. For many, getting in and out of bed can be quite a chore. Unlike fixed-style bed rails, the Smart-Rail System Bed Rail is an innovative bed assist rail designed for those requiring a little help for moving, standing and transferring in and out of bed. HealthCraft Smart-Rail System Bed Rail Instructions HealthCraft Smart-Rail System Bed Rail Specifications: Material: Alloy steel. Finish: Anti-microbial powder coat white gloss finish. Grip material: Non-slip, PVC closed cell foam, latex free. Rail Measurements: 1.5 inch diameter, 16.25 inches long, height adjusts 27.25 to 36.25 inches. Item weight: 13 pounds. Weight Capacity: 300 pounds. Important Note: This bed rail will not work on hospital beds or futons.
  • Price: $132.95
  • HealthCraft SuperPole System with Super Trapeze
  • Description: The HealthCraft SuperPole System with SuperTrapeze is an easy to install floor to ceiling transfer assist pole with a trapeze handle for bed mobility. This helpful transfer aid assists in one of the hardest motions - transferring from a lying position to a seated position in bed. The handle has two offset ladder-style rungs to allow for improved use of arm strength for increasing bed mobility independence. The Super Pole transfer aid is designed to go from floor to ceiling. Simply turn the jackscrew at the base to expand the Super Pole from floor to ceiling for a secure fit. Rubber pads on both plates ensure safe use without marking, even on stipple ceilings. This safety transfer pole and trapeze is made of steel with an anti-microbial powder coated white gloss finish. The base plate measures 5 inches in diameter and the ceiling plate measures 20 inches long. The Super Pole System holds up to 300 pounds and fits ceilings from 93 - 99 inches high. No more than 150lbs should be exerted on the Super Trapeze system. Please Note: The SuperPole system should only be used between floors and ceilings of solid construction, or injury may result. Not for use on loose floor coverings, in rooms with radiant ceiling heating, mobile homes or in suspended or angled ceilings. HealthCraft SuperPole System with SuperTrapeze Product Instructions HealthCraft SuperPole System with SuperTrapeze Specifications: Strap adjusts: 3 to 29 inches long. Trapeze Arm measures: 17 inches long. Trapeze diameter: 1 inch. Finish: Anti-microbial white powder coat. Weight Capacity: 300 lbs. No more than 150 lbs for the trapeze. Material: Alloy steel. Grip material: Non-slip, PVC closed cell foam, latex free. Pole measures: 93 - 99 inches or 7 feet 9 inches to 8 feet 4 inches long, 1.5 inch diameter. Top plate measures: 20 inches long. Base Plate diameter: 5 inches. Standard Pole Weight: 13 pounds. Add-on Options: Ceiling Plate Extender, E2 Ceiling Mount.
  • Price: $284.95
  • HealthCraft PT Rail Angled Safety Grab Bar
  • Description: The HealthCraft PT Rail Angled Safety Grab Bar is a hinged, adjustable safety rail designed to provide support for users going up or down 2-3 stairs. This high quality, commercial grade hand rail can be lowered or raised and adjusted to the angle needed for best support. The HealthCraft PT Rail Angled Safety Grab Bar is an exceptional solid rail that provides excellent support in areas such as sunken living rooms, garage entryways or anywhere two or three stairs or changes in floor elevations are found. An adjustment screw allows the rail to be set at a customized angle between 0 and 30 degrees. The support rail easily folds up to store out of the way, and a friction hinge ensures that the handle will not inadvertently lower when it is in the up position. The safety railing can be mounted to virtually any wall with basic structural reinforcements. People who have difficulty going up and down stairs will find the HealthCraft PT Rail Angled Safety Grab Bar helpful for increasing mobility. HealthCraft PT Rail Angled Safety Grab Bar Instructions HealthCraft PT Rail Angled Safety Grab Bar Specifications: Materials: Alloy steel. Finish: Anti-microbial white powder coat. Rail length: 32 inches. Rail diameter: 1.5 inches. Rail angle range: 0 - 30 degrees. Weight Capacity: 400 lbs. Item weight: 16 pounds. Add-on Options: PT Rail Floor Mast, Wall Plate.
  • Price: $304.95
  • HealthCraft SuperPole System Heavy Duty
  • Description: The HealthCraft SuperPole System Heavy Duty is the bariatric model floor-to-ceiling transfer assist pole that provides support and balance assistance for people who weigh up to 450 lbs. This sturdy, expansion fit transfer aid is ideal for any room and is a stable support for users when moving from a seated position to a standing position. The HealthCraft Super Pole System Heavy Duty uses a jack-screw expansion that creates enough tension between the floor and ceiling to hold the pole securely. Rubber pads on the ceiling plate and the floor plate hold the transfer pole in place and prevent marring of the ceiling or floor. This transfer assist pole installs easily with no structural reinforcements needed. The foam hand grip provides a comfortable gripping surface. People who need support and balance assistance to stand will find this pole is useful beside a bed, bath, toilet or chair. Since the Super Pole System Heavy Duty is required to handle more weight than the regular SuperPole Basic, it should be secured to the ceiling and the floor. The following add-on accessories are available for the SuperPole System: The SuperBar Add On Kit, Uni-Fit Extender, Ceiling Plate Extender. HealthCraft SuperPole System Heavy Duty Product Instructions HealthCraft SuperPole System Heavy Duty Specifications: Material: Alloy steel. Finish: Anti-microbial powder coat white gloss finish. Grip material: Non-slip, PVC closed cell foam, latex free. Pole measures: 93 - 99 inches or 7 feet 9 inches to 8 feet 4 inches long, 1.5 inch diameter. Base Plate diameter: 5 inches. Maximum Weight Capacity: 450 pounds. (Bariatric) Pole Weight: 13 pounds.
  • Price: $356.95
  • Stander Omni Tray Mobility Handle
  • Description: The Stander Omni Tray Mobility Handle provides users the safety of a support handle with the convenience of a TV Table. The large Bamboo tray table is ideal for using a lap top, eating dinner, or reading a favorite book. The Stander Omni Tray Mobility Handle is a sturdy support that provides additional leverage for users who have difficulty standing from a sofa or recliner. The tray table can be used as a couch side table, or simply rotated off to the side when not needed. The large, oversized tray measures 20 inches wide, 15 inches deep, and rotates 360°. The Omni Tray is adjustable in both height and length so it is able to fit most chairs, couches, recliners, and lift chairs. Place the base of the Stander Omni Tray Mobility Handle under the feet of the chair or sofa for added support for standing. Stander Omni Tray Mobility Handle Specifications: Height of tray: 24 to 32 inches. Handle height adjusts: 28.5 to 36.25 inches. Handle dimensions: 4.5 inches wide, 5 inches long. Base length adjusts: 25.5 to 35.5 inches. Items weighs: 20 lbs. Tray measures: 20 inches wide, 15 inches long. Base feet measure: 5 inches wide, 8 inches long. Weight limit of tray: 30 lbs. Weight limit of handle: 250 lbs. WARNING: Important information for California residents
  • Price: $159.95
  • Stander Signature Life Sure Stand Pole
  • Description: The Stander Signature Life Sure Stand Pole is a tension mounted support pole for making transfers easier in a variety of settings in the home. This transfer pole is a great way to add extra support and stability to any room. The Stander Signature Life Sure Stand Pole works with both flat and slanted ceilings, and accommodates ceiling heights of 7 to 10 feet, with an available extension piece for ceilings 10 to 12 feet high. This durable, sturdy pole is made of rust-resistant aluminum coated in a durable anodized finish and comes in two sophisticated colors that will coordinate beautifully with home decor. The Sure Stand Pole is tension mount, so there is no need to drill into the ceiling, and no additional tools are required for assembly or installation. The Sure Stand Pole includes two independently adjustable hand grips that provide additional support during transfers. Stander Signature Life Sure Stand Pole Instructions Stander Signature Life Sure Stand Pole Specifications: Dimensions: 18.5 inches long, 7 inches wide, 84 inches high. Weight Capacity: Supports up to 300 lbs. Fits ceiling heights: From 7-10 feet. Extension piece sold separately for 12 foot ceilings. Product Weight: 16.5 lbs. Materials: Rust resistant aluminum with durable anodized finish. Fits ceiling types: Flat and vaulted ceilings. (Pole must be screwed in for vaulted ceilings.) Customize: Handles can be placed anywhere 360 degrees on the pole and at most heights. Choose color: Dark Bronze or Metallic Gray. WARNING: Important information for California residents
  • Price: $280.00
  • Stander Signature Life Sure Stand Pole Extension
  • Description: The Stander Signature Life Sure Stand Pole Extension is an additional extension that allows the Sure Stand Pole to fit ceilings up to 12 feet high. This easy to attach extension piece fits the Sure Stand Pole only. The Stander Signature Life Sure Stand Pole works with both flat and slanted ceilings, and accommodates ceiling heights of 7 to 10 feet. With the extension piece, the transfer pole will fit ceilings 10 to 12 feet high. Stander Signature Life Sure Stand Pole Instructions Stander Signature Life Sure Stand Pole Extension Specifications: Dimensions: 24 inches long. Fits: Signature Life Sure Stand Pole. Ceiling heights: 10 to 12 feet. Product Weight: 16.5 lbs. Materials: Rust resistant aluminum with durable anodized finish. Choose color: Dark Bronze or Metallic Gray. WARNING: Important information for California residents
  • Price: $59.95
  • Stander Signature Life Independence Tray Table
  • Description: The Stander Signature Life Independence Tray Table is a durable standing aid with tray that can be used with a couch, chair, lift chair or sofa. Unlike other TV trays, the tray table swivels around 360 degrees, so you can slide it out of the way easily. The Stander Signature Life Independence Tray Table has a handle with ergonomic palm pad cushion that provides support for users to transfer to standing. The bamboo table provides a convenient surface for meals, games, or books. The cup holder attaches to the side of the tray to help prevent spills. The base pads are adjustable in length to fit most sizes of chairs, couches, and lift chairs. The base pads are placed under the furniture to maintain the steadiness of the table. People who have difficulty standing from their favorite couch, chair, lift chair or sofa will find the Signature Life Independence Tray Table helpful for increasing mobility. Stander Signature Life Independence Tray Table Instructions Stander Signature Life Independence Tray Table Specifications: Dimensions: 25.5 inches long, 17 inches wide, 28.5 inches high. Weight Capacity: Supports up to 250 lbs. Adjustment Range of Base Pads: 25.5 - 35.5 inches. Adjustment Range of Handle: 28.5 - 36.25 inches. Adjustment Range of Tray: 24
  • Price: $220.00
  • Stander Signature Life Sleep Safe Home Bed Rail
  • Description: The Stander Signature Life Sleep Safe Home Bed Rail is a bed safety rail that provides stability for standing, increases bed safety, and provides support for bed mobility independence. The rail helps prevent nighttime falls and folds down for easier transfers during the day. The Stander Signature Life Sleep Safe Home Bed Rail provides users a sturdy hand rail to help assist in getting in and out of bed. This half size bed rail extends in length from 26 to 34 to 42 inches for fall protection at night. The rail pivots 180 degrees down and out of the way when not in use, allowing the user to get out of bed or providing space for making bed. The rail secures to the bed frame of most any home or common adjustable bed with included safety strap, and fits mattress heights from 12 to 18 inches. The leather pouch makes this bed rail the perfect mix of safety and style. The Stander Signature Lift Sleep Safe Home Bed Rail discrete bedside handle offers extra stability so users can stand with confidence and peace of mind. Stander Signature Life Sleep Safe Home Bed Rail Instructions Stander Signature Life Sleep Safe Home Bed Rail Specifications: Fits bed sizes: Twin, Full, Queen, California King, King, Adjustable or Non Adjustable, with box springs or platform. Fits mattress heights: 12 to 18 inches. Weight Capacity: 300 lbs. Rail Length: Extends from 26, to 34, to 42 inches. Includes: Leather-like organizer pouch Assembly: Installs in minutes with 5 bolts and included tool. WARNING: Important information for California residents
  • Price: $170.00
  • Stander Signature Life Confidence Bed Handle
  • Description: The Stander Signature Life Confidence Bed Handle offers extra stability so users can stand with confidence and peace of mind. This transfer handle has an innovative, simple design that provides a discreet way to have added support when getting in and out of bed. The Stander Signature Life Confidence Bed Handle is the perfect mix of comfort and style. The innovative design allows the handle to be adjustable by height to accommodate mattress heights from 10 to 17 inches high. The handle secures to the bed with a safety strap that fits most standard and adjustable residential beds. This bed handle has a 300 pound weight capacity. The handle includes a designer pouch to store a remote, phone, or other small items that are needed to keep close by. The Confidence Bed Handle provides users who are recovering from surgery or simply need some extra support getting in and out of bed helpful support for easier transfers. Stander Signature Life Confidence Bed Handle Instructions Stander Signature Life Confidence Bed Handle Specifications: Fits bed sizes: Twin, Full, Queen, California King, King, standard or adjustable. Fits mattress heights: 12 to 17 inches. Weight Capacity: 300 lbs. Includes: Leather-like organizer pouch. Handle adjusts in height: 19.5 to 25.5 inches. Assembly: Installs in minutes with 5 bolts and included tool. Weighs: 6.5 pounds. Color: Dark Bronze. WARNING: Important information for California residents
  • Price: $120.00
  • HealthCraft Advantage Rail
  • Description: The HealthCraft Advantage Rail is a floor mounted support rail that features an innovative pivot and lock technology to help make transfers easier. This unique safety rail accommodates multiple hand positions and can be installed in rooms where a floor to ceiling pole is not suitable. People with limited mobility will find this transfer aid provides versatility and stability. The HealthCraft Advantage Rail provides vertical and horizontal support and features 8 different locking positions (one at every 45 degrees). The floor-mounted transfer support features unique technology that allows the horizontal support to pivot to the position needed, and lock in place for sturdy support. The rail can be installed in a bedroom, bathroom, or wherever free-standing support is needed to help make transfers easier. The HealthCraft Advantage Rail is the perfect solution for providing safe support for transfers in rooms that will not accommodate a floor to ceiling support pole. HealthCraft Advantage Rail Instructions HealthCraft Advantage Rail Specifications HealthCraft Advantage Rail Specifications: Material: Alloy steel. Finish: Anti-microbial powder coat white gloss finish. Grip material: Non-slip, PVC closed cell foam, latex free. Maximum Weight Capacity: 300 pounds. (Standard) Rail Diameter: 1.5 inches. Support Arm Length: 17 inches. Height Adjustable: 30 - 38 inches. Installation Mechanism: Secures to floor (hardware dependent on floor type). Installation Hardware/Fasteners: 1/4 inch diameter, 3 inches long lag bolts are included. Fasteners Concealed: Metal base plate covers mounting screws.
  • Price: $251.95
  • Stander Bed Caddie
  • Description: The Stander Bed Caddie is a long strap with handles designed to assist users with general weakness or decreased back strength to pull themselves up to a sitting position in bed. This bed ladder system has cushioned grip handles and is made of durable nylon. The Stander Bed Caddie has a long loop that attaches to the foot of the bed, and another loop with a 3 tiered handle system. The ergonomic buckle design allows the long loop to easily attach to the bed and accommodates most metal framed and wood framed beds. The ladder design handle system has cushioned grips that provide added comfort when the user is pulling themselves up into a sitting position. The Bed Caddie is easy to assemble and attach to the bed. First, loop the lower around the bed frame, then snap the easy connect buckle into place. Next, adjust the strap length so that the first handle lies at waist level when lying in bed. Bed Caddie Specifications: Grip handles measure: 5 inches wide. Accommodates: Most metal framed and wood framed beds. Weight Capacity: 300 lbs. Strap Length: Adjustable 48 - 84 inches. Length between handles: 12 inches. WARNING: Important information for California residents
  • Price: $22.95
  • Stander Bariatric EZ Stand-N-Go
  • Description: The Stander Bariatric EZ Stand-N-Go is a heavy duty support frame with dual handles that help make standing easier. People who have difficulty when rising from a recliner, sofa, or chair will find this standing aid helpful. The Stander Bariatric EZ Stand-N-Go features a unique frame that adjusts in height, width, and depth to fit a wide range of couches and chairs. The heavy duty frame will support users weighing up to 400 pounds. People who have difficulty standing from a couch, chair, or recliner, will find this support frame allows them to use both arms to assist in safely standing or sitting. The support frame is easy to install, and places the two handles in the right place to provide maximum support for transferring to stand easily. The frame is fully adjustable to fit a variety of couches, chairs, or recliners, and can be installed on most recliners without interfering with the rocking of the chair. The Stander Bariatric Stand-N-Go is ideal for people who are recovering from surgery, have back pain, general unsteadiness, or have a lower-set couch that is hard to stand from. Stander Bariatric EZ Stand-N-Go Specifications: Base depth adjusts: 23-26 inches. Width between handles adjusts: 19-26 inches. Handle height from floor adjusts: 22-32 inches. Fits: Most couches, chairs, recliners. Material: Powder coated steel. Item weight: 8.5 pounds. Weight Capacity: 400 lbs. WARNING: Important information for California residents
  • Price: $129.95
  • Stand-a-Roo Single Arm Standing Aid
  • Description: The Stand-a-Roo Single Arm Standing Aid is an adjustable handle designed to make standing from a sofa, couch or bed easier. The durable anodized aluminum frame with soft foam grip helps users safely and easily stand or sit. The Stand-a-Roo Single Arm Standing Aid accommodates for all couch sizes, from the smallest sofas and loveseats to large couches. Adjust the height of the support handle to provide leverage and stability for users who have difficulty standing or sitting. The handle fits under and in between removable cushions of any size. This helpful standing aid is made from super strong anodized aluminum for long lasting durability and equipped with EVA non-slip foam grip for added support. Stand-a-Roo Single Arm Standing Aid has helped thousands of people win back their independence one bed at a time! Stand-a-Roo Single Arm Standing Aid Specifications: Measures: 18 inches wide, adjusts 13 to 19 inches high. Assembly: None required. Materials: Super strong anodized aluminum, EVA non-slip foam grip. Weighs: Less than 2 lbs. Supports: Up to 250lbs. Fits: Beds with separated mattress & box spring, love seats with removable cushions.
  • Price: $49.95
  • Stand-a-Roo Double Arm Standing Aid
  • Description: The Stand-a-Roo Double Arm Standing Aid is an adjustable dual handle that adjusts in width and height. This helpful standing aid provides leverage and stability for users who have difficulty standing or sitting from a sofa, couch or bed. The Stand-a-Roo Double Arm Standing Aid is designed to make standing from a sofa, couch or bed easier. The durable anodized aluminum frame with soft foam grip helps users safely and easily stand or sit. The support handles accommodate all couch sizes, from the smallest sofas and loveseats to large couches. Adjust the width and height of the handle to fit under and in between removable cushions of any size. The handle is made from super strong anodized aluminum for long lasting durability and equipped with EVA non-slip foam grip for added support. Stand-a-Roo Double Arm Standing Aid has helped make standing from a sofa, couch or bed easier for thousands of people. Stand-a-Roo Double Arm Standing Aid Specifications: Measures: 19 to 33 inches wide, 10 to 14 inches high. Assembly: None required. Materials: Super strong anodized aluminum, EVA non-slip foam grip. Weighs: Less than 2 lbs. Supports: Up to 350lbs. Fits: Beds with separated mattress & box spring, love seats with removable cushions.
  • Price: $59.95
  • Step2Bed Adjustable Height Bed Step Stool
  • Description: The Step2Bed Adjustable Height Bed Step Stool is a bed safety step with hand rail and LED light designed to make getting in and out of bed easier. This portable bed step stool comes with grab bars for decreasing fall risks for users who have difficulty with bed transfers. The Step2Bed Adjustable Height Bed Step Stool combines the safety of a handrail with a non-slip, extra wide step that is 18 inches long, 32 inches wide. The step has six different height adjustments, from 2.5 to 7.5 inches high. This allows the user to customize the height of the step to meet their specific needs. The tall grab bar is 31 inches high. Short grab bar is 22.8 inches at the highest point, angles down at 30 degrees and the low point is 12 inches high. The lower side grab bar doesn't impede the user’s natural motion when lifting their legs to get into bed, and lowering their legs when getting out of bed. The step does not attach to the bed, so it works on either side of bed. The LED light is motion activated to provide additional lighting for increased safety at night. Making the product from steel ensures users will be safe when using the safety step, and it has been tested to support 1200+ pounds. The Step2Bed Adjustable Height Bed Step Stool was developed by a RN out of a need to help his grandparents who struggled with mobility and bedside falls. Step2Bed Adjustable Height Bed Step Stool Specifications: Weighs: 22 lbs. Supports up to: 400 lbs. Step height Adjusts: 6 height settings, 2.5 - 7.5 inches. Materials: Steel tubing, metal fixtures, white powder coating. Dimensions: 18 inches long, 32 inches wide, 32 inches high. Tall grab bar is 31 inches high. Short grab bar is 22.8 inches at the highest point, angles down at 30 degrees and the low point is 12 inches high. LED light power: Battery operated, requires four (4) AAA batteries. Assembly: Required. Simple to assemble: four pieces, six bolts and four legs that adjust the height.
  • Price: $139.00
  • Stander CouchCane
  • Description: The Stander CouchCane is a support handle designed to help users stand up and sit down easier. This ergonomic transfer aid offers sturdy support for sitting down or standing up from a couch, chair, or recliner. The Stander CouchCane is easy to install and is adjustable in length and height. It adjusts in length from 21 to 33 inches long to fit either side of a couch or chair. The height adjusts from 29 to 32 inches. The super grip rubber pads provide extra stability and protect floors against damage. The convenient pouch organizer provides 4 large pockets for extra storage. The Stander Couch Cane is designed to be user friendly, quick and easy to assemble. Simply slide two base pieces together, insert handle into base, adjust depth of base and height of handle to desired, and place under the couch, recliner or chair. Stander CouchCane Assembly Instructions Stander CouchCane Specifications: Fits: Couch feet distance 21 to 33 inches. Adjustable cane height: 29 to 32 inches. Handle width: 15 inches. Item weight: 15 lbs. Weight Capacity: 250 lbs. Shipping: UPS Ground. Model: 2001. WARNING: Important information for California residents
  • Price: $139.95
  • Stander Bed Cane Transfer Handle
  • Description: The Stander Bed Cane Transfer Handle is a wide handle bed rail that helps to make movement in and out of a bed easier. People who have difficulty sitting up in bed or standing up from a bed will find this sturdy support bed rail helpful. The Bed Cane allows users to use both hands to sit up on the side of the bed, and also offers a stable handle to maintain balance while rising to a standing position. The Stander Bed Cane Transfer Handle with comfortable, cushion grip is reversible so that the handle can be installed on either side of the bed. The 19 inch wide, 23 inch long wooden base fits between the mattress and box springs. The shaft has a durable powder coat finish, adjusts from 19 to 22 inches high for varying mattress thicknesses, and is also collapsible for transporting. A safety strap loops around the bed frame on the opposite side of the bed and secures the transfer handle to the bed frame. The Stander Bed Cane fits up to King sized beds, and will work on Craftmatic, adjustable and hospital beds, just secure the bed rail above or below where the bed folds. The Bed Cane assembles quickly with 3 bolts and a safety pin. Each Bed Cane includes free organizer pouch and has a 350 lb weight capacity. Stander Bed Cane Transfer Handle Instructions Stander Bed Cane Transfer Handle Specifications: Wooden Base measures: 19 inches wide, 23 inches long. Handle adjusts: 19 to 22 inches high. Weight Capacity: 350 lbs. Handle Width: 15 inches. Item weighs: 12lbs. Fits: Twin, full, queen, and king size beds. Standard home beds, hospital beds, adjustable beds. WARNING: Important information for California residents
  • Price: $89.95
  • Stander Mobility Bed Rail
  • Description: The Stander Mobility Bed Rail is a bed safety rail with leg extensions and an additional pivoting support handle. People who need support for transferring out of bed to a wheelchair will find this mobility handle helpful. The Stander Mobility Bed Rail is a combination bed rail and transfer handle. The half-size bed rail helps to prevent nighttime falls. The legs extend to the floor and provide extra stability for users to safely stand. The extra pivoting arm provides extra support for users to walk or transfer to a wheelchair. Anti-slip grips secure the rail in between the mattress and bed frame, no safety strap is needed. The ergonomic cushion handle provides a comfortable grip. The included 4 pocket organizer provides storage space for personal items. The Stander Mobility Rail supports up to 300 pounds and is height adjustable to accommodate home or hospital beds. The Stander Mobility Bed Rail is an ideal device for those that need extra stability when getting in and out of bed. Stander Mobility Bed Rail Instructions Stander Mobility Bed Rail Specifications: Height adjustment from floor to top of handle: 31 inches - 44 inches. Height adjustment from mattress base to top of handle: 17.5 inches - 22.5 inches. Rail width: 18 inches. Height range from floor to horizontal support structure under mattress: 13.5 inches - 21.5 inches. Depth of horizontal support structure under mattress: 20 inches. Weight of product: 10.5 lbs. Weight capacity: 300 lbs. Made of: Steel frame with durable powder coat finish. Includes: 4 pocket organizer. WARNING: Important information for California residents
  • Price: $99.95
  • Stander EZ Adjust Bed Rail
  • Description: The Stander EZ Adjust Bed Rail is an easy to adjust bed rail to prevent falling out of bed and a hand rail to assist in getting out of bed. This bed safety rail offers users four different positions for support. The Stander EZ Adjust Bed Rail easily adjusts from 26 to 34 to 42 inches after it has been placed on the bed. The adjustable length allows the folding safety rail for use as both a bed rail or hand rail. The rail folds down to side of bed to allow users to get out of bed or provide space for making bed. A safety strap allows the rail to be attached to any home or hospital bed, and can be placed on either side of the bed. This bed rail is easy to assemble, and installs in minutes with 4 bolts and Allen Wrench (Included). The rail also adapts to the appropriate height for varying mattress thicknesses from 12 to 18 inches. The Stander EZ Adjust Bed Rail provides users a stable support for bed transfers and a safety rail to prevent falling out of bed. Stander EZ Adjust Bed Rail Assembly Instructions Stander EZ Adjust Bed Rail Specifications: Weight Capacity: 300 lbs. Weight of Product: 14 lbs. Gap Between Rails: 3 inches. Height of Rail: 23 inches high from the base of mattress. Width of Rail: Locks in place at 26, 34, and 42 inches after installed on bed. Fits: Mattress thickness 12 - 18 inches. Bed Type: Attaches to any home or many common adjustable beds with included Safety Strap. Package Dimensions: 28 inches long, 21 inches wide, 1.5 inches high. Color: Charcoal Gray Material: Powder coat steel. WARNING: Important information for California residents
  • Price: $119.95
  • Stander EZ Stand-N-Go
  • Description: The Stander EZ Stand-N-Go is a standing frame with dual handles that assist users in standing easily and comfortably from a recliner, couch, or chair. The frame adjusts in height, width, and depth to fit a wide range of couches and chairs. The unique design of the Stander EZ Stand-N-Go allows it to be installed on most recliners without interfering with the rocking of the chair. People who have difficulty standing from a couch, chair, or recliner, will find this support frame allows them to use both arms to help when standing or sitting. The support frame is easy to install, and places the two handles in the right place to provide maximum support for transferring to stand easily. The frame is fully adjustable to fit a variety of couches, chairs, or recliners. The Stand-N-Go is ideal for people who are recovering from surgery, have back pain, general unsteadiness, or have a lower-set couch that is hard to stand from. Furniture armrests are often set too low, and don't provide enough leverage to help with standing. The EZ Stand-N-Go will support up to 300 pounds. Stander EZ Stand-N-Go Specifications: Base depth adjusts: 23-26 inches. Width between handles adjusts: 19-26 inches. Handle height from floor adjusts: 22-32 inches. Fits: Most couches, chairs, recliners. Material: Powder coated steel. Item weight: 8.5 pounds. Weight Capacity: 300 lbs. WARNING: Important information for California residents
  • Price: $115.95
  • Assist-A-Tray
  • Description: The Assist-A-Tray is two products in one! This innovative mobility aid is designed to assist you getting in and out of your couch or chair as well as provide a convenient lap desk that swivels 360 degrees out of the way when it isn't in use. The Assist-A-Tray is a must have for anyone with impaired balance, arthritis back pain or recent surgery. Fully adjustable in both height and length, the Assist-A-Tray can be used by people of varying heights. The solid footrests adjust in length to fit securely under the legs on either side of your favorite chair or sofa, firmly stabilizing the safety handle as you raise or lower yourself. The durable, solid, birchwood tray (with cupholder and utensil space) swivels 360°. Super-grip rubber pads protect the floor. Easy assembly - everything you need is included. Works well with most any couch, chair, recliner, or lift chair. Standers Assist-A-Tray Assembly Instructions Assist-A-Tray Specifications: Tray height adjusts : 26 to 32 inches. Handle height adjusts: 34 to 40 inches. Handle dimensions: 6 x 6 inches, 1.25 inch diameter. Base length adjusts: 20 to 36 inches. Weight: 19.5 lbs. Tray weight limit: 30 lbs. Handle weight limit: 250 lbs. Tray measures: 18 inches wide, 13 inches deep. WARNING: Important information for California residents
  • Price: $169.95
  • Stander Bed Rail Advantage Traveler
  • Description: The Stander Bed Rail Advantage Traveler provides a stable hand rail and offers a helping hand to a sitting position in bed. People who have difficulty with bed mobility will find this sturdy bed rail easy to use and install. The Stander Bed Rail Advantage support handle with non-slip cushion handle makes it easy to get in-and-out of bed. The bed handle does not require any assembly, pops out of box ready to be placed on any bed. The bed rail is made of quality steel construction, heavy duty steel with powder coat that provides long lasting quality. The handle folds down, making it ideal for travel or storage. A safety strap secures the base of the bed rail to mattress. The handle has a foam grip that provides a comfortable cushion grip, and the closed cell foam is easy to sanitize. The Stander Bed Rail Advantage fits on either side of the bed and includes the 4 pocket pouch organizer. Bed Rail Advantage Assembly Instructions Stander Bed Rail Advantage Traveler Specifications: Assembly: No assembly required. Installs in minutes with 3 bolts and safety pin. Weight Capacity: 400 lbs. Rail measures: 22 inches high, 17 inches wide. Base Dimensions: 21 inches wide, 17 inches long. Item weighs: 8 lbs. Fits: Home or hospital bed with mattress thickness 10 to 16 inches. WARNING: Important information for California residents
  • Price: $69.00
  • Etac Turner Pro Transfer Aid
  • Description: The new Etac Turner Pro Transfer Aid is an easy to use patient turner that facilitates moving users between seating positions. This easy to use turning aid helps users feel safe during transfers, while reducing strain on the caregiver. The Etac Turner Pro Transfer Aid has a large handle that allows the caregiver to maintain an ergonomic working position while assisting the user in moving from one seated position to another. The compact patient turning aide is easy to position and use. The low footplate, only 0.5 inch high, makes it easy for the user to place their feet on it. The non-slip surface on the footplate provides additional safety. The only adjustment necessary is the height of the leg support. When the user is ready, the transfer can be performed safely while the caregiver and user maintain eye contact and communication. The oval handle provides a horizontal grip that is easy for users to grip. The Etac Turner Pro is intended to be used as a sit to stand transfer platform but should only be used with patients who can stand with support and can bear their own weight. The turning aid enables users to transfer from bed to wheelchair or shower chair, or for transfers between wheelchair to toilet and from chair to wheelchair or shower chair. Etac Turner Pro Transfer Aid Instructions Etac Turner Pro Transfer Aid Information Etac Turner Pro Transfer Aid Specifications: Maximum user weight: 440 lbs. Item weighs: 16.5 lbs. Oval handle height adjusts: 30.71 - 49.21 inches. Footplate diameter: 15.7 inches. Materials: Cast aluminum, powder coated steel, chrome 3. Lower leg support width: 15 inches. Lower leg support height: 5.9 inches. Manufacturer's guarantee: 5 year guarantee against material and manufacturing defects. Assembly: Required. Assembly tools are included. Made in: Sweden.
  • Price: $405.00
  • Stander PT BedCane Transfer Handle
  • Description: The Stander PT BedCane Transfer Handle is a low-profile bed handle that is ideal for anyone needing assistance in and out of bed. This ergonomic handle is compact and portable, making it ideal for travel. The Stander PT BedCane Transfer Handle is easy to install. Just slip the horizontal support bars between the mattress and box spring, then attach the safety strap to the bed frame on the opposite side of the bed. The height of the bed handle can be adjusted to fit mattresses from 10 to 17 inches high. This ergonomic bed handle allows users to apply a two-handed grip, providing increased leverage for users who have difficulty turning over, sitting up or getting in and out of bed. The Stander PT BedCane Transfer Handle includes a handy organizer pouch to store small items close by, and can support weight up to 300 pounds. Stander PT BedCane Transfer Handle Instructions Stander PT BedCane Transfer Handle Specifications: Dimensions: 19.5-25.25 inches long, 6.5 inches wide, 19 inches high. Fits: Mattresses from 10 to 17 inches high. Weighs: 5.6 lbs. Weight Capacity: 300 lbs. Includes: Pocket organizer. Assembly: Required. Easy to assemble with no additional tools required. WARNING: Important information for California residents
  • Price: $94.95
Last Updated On Monday, September 28th 2020
Images, Information & Products Are Property of & Supplied By Their Respected Merchant/Source That We Proudly List.
 © Road To Serenity Is Property Of A And L Merchants, Inc. Of Black River Falls, WI. ™ ALM Trademark
Return To Top Return Home


Health

Kentones

Wright Stuff

General Items

Around the House

Fitness

For Your Comfort

Getting Ready

In The Kitchen

On The Move

Mobility

F.Y.I.

Here To Help